Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
[n] D. H. Thompson, D. Curry, and J. Dedic, “Timing System Upgrade for SNS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP039, pp. 483-485.
[n] R. Tom?ís et al., “The CLIC BDS Towards the Conceptual Design Report”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE030, pp. 3419-3421.
[n] W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
[n] Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2970-2972. doi:10.18429/JACoW-IPAC2015-WEPMN021
[n] M. J. Johnson et al., “Design of the FRIB Cryomodule”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD006, pp. 2507-2509.
[n] F. Staufenbiel, S. Riemann, G. A. Moortgat-Pick, and A. Ushakov, “Heat Load, Stress and Reaction Force Studies of a Polarized Positron Production Target for the Future International Linear Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1331-1333. doi:10.18429/JACoW-IPAC2014-TUPME001
[n] I. Oya et al., “A Readout and Control System for a CTA Prototype Telescope”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU026, pp. 494-497.
[n] T. Sugimoto, K. Ishii, H. Matsumoto, T. Shibata, and K. Fan, “Performance of a Compensation Kicker Magnet for J-PARC Main Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3588-3590. doi:10.18429/JACoW-IPAC2016-THPMW021
[n] T. Atkinson et al., “Commissioning of the 50 MeV Preinjector Linac for the BESSY II Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC108, pp. 3140-3142.
[n] C. Mitsuda et al., “Suppression of Stored Beam Oscillation at Injection by Fast Kicker in the SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 280-282. doi:10.18429/JACoW-IPAC2014-MOPRO082
[n] T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
[n] G. Asova et al., “First Results with Tomographic Reconstruction of the Transverse Phase Space at PITZ”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA30, pp. 543-546.
[n] K. Oide et al., “A Few Issues on the Upgrade of KEKB B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI01, pp. 23-27.
[n] A. I. Sukhanov, A. Saini, N. Solyak, and I. S. Tropin, “Model of Dark Current in SRF Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1834-1836. doi:10.18429/JACoW-IPAC2015-TUPJE081
[n] J. Tanaka et al., “Operation of the KEK 20 MeV Injector Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F04, pp. 333-337.
[n] Y. Yamamoto, H. Hayano, E. Kako, S. Noguchi, T. Shishido, and K. Watanabe, “Progress of High Gradient Performance in STF 9-cell Cavities at KEK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC013, pp. 2233-2235.
[n] J. Wang et al., “The Effect of Magnetic Field on the Secondary Electron Yield in the Ultra-High Vacuum Environment”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3281-3283. doi:10.18429/JACoW-IPAC2016-THPMB025
[n] I. Hofmann, “Revisiting the Longitudinal 90 Degree Limit for Superconducting Linear Accelerators”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 369-372. doi:10.18429/JACoW-HB2018-THP2WB01
[n] R. Bartolini, R. T. Fielder, and C. A. Thomas, “Loss Factor and Impedance Analysis for the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA052, pp. 1826-1828.
[n] S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 453-457. doi:10.18429/JACoW-HB2016-WEPM6Y01
[n] A. Miura and H. Matsumoto, “Development of an S-Band High-Power Pillbox-Type RF Window”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-30, pp. 124-126.
[n] K. Fan, K. Ishii, H. Matsumoto, N. Matsumoto, T. Shibata, and T. Sugimoto, “New Design of J-PARC Main Ring Injection System for High Beam Power Operation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2097-2099. doi:10.18429/JACoW-IPAC2014-WEPRO065
[n] G. Vanbavinckhove et al., “Geometry and Optics of the Electrostatic ELENA Transfer Lines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO051, pp. 1985-1987.
[n] Z. Y. Guo et al., “Recent Studies on Beam-Photoelectron Instability in BEPC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRBR3, pp. 633-635.
[n] G. X. Xia, M. Ivanyan, K. Manukyan, K. A. Sargsyan, and R. Wanzenberg, “Ion Effect Issues in PETRA III”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP073, pp. 3371-3373.
[n] A. Vnuchenko et al., “Start-to-End Beam Dynamic Simulations for PRAE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 495-498. doi:10.18429/JACoW-IPAC2018-MOPML044
[n] M. A. C. Cummings and D. M. Kaplan, “Muon Cooling Research and Development”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB089, pp. 1798-1800.
[n] J. W. Staples et al., “Design of a VHF-band RF Photoinjector with MegaHertz Beam Repetition Rate”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN117, pp. 2990-2992.
[n] T. J. Roberts and D. M. Kaplan, “G4Beamline Simulation Program for Matter-dominated Beamlines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN103, pp. 3468-3470. doi:10.1109/PAC.2007.4440461
[n] S. A. Kostromin, G. A. Karamysheva, N. A. Morozov, and E. Samsonov, “Study of Beam Capture in Compact Synchrocyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT015, pp. 353-355.
[n] G. X. Xia, “Ion Instability Study for the ILC 3 km Damping Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP103, pp. 1671-1673.
[n] T. Ha, “Design Study of Vacuum System for a 4th Generation Storage Ring in Korea”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOOA03, pp. XX-XX.
[n] H. Yamada et al., “Commissioning of the World Smallest Electron Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D011, pp. 692-694.
[n] A. Ushakov, S. Riemann, and A. Schaelicke, “Polarized Positron Production and Tracking at the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN017, pp. 2742-2744.
[n] R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631.
[n] Ya. V. Getmanov, O. A. Shevchenko, T. Atkinson, and N. Vinokurov, “Longitudinal Stability of Multiturn ERL with Split Accelerating Structure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA047, pp. 2226-2228.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Xu et al., “Preliminary Results of H2+ Beam Generated by a 2.45 GHz Permanent Magnet ECR Ion Source at PKU”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI035, pp. 363-365.
- D. H. Thompson, D. Curry, and J. Dedic, “Timing System Upgrade for SNS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP039, pp. 483-485.
- R. Tom?ís et al., “The CLIC BDS Towards the Conceptual Design Report”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE030, pp. 3419-3421.
- W. Zhang, W. Eng, C. Pai, J. Sandberg, Y. Tan, and Y. Tian, “A Simplified Approach to Analyze and Model Inductive Voltage Adder”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS092, pp. 2553-2555.
- Y. H. Xu et al., “Design and Research of Secondary Electron Emission Test Equipment with Low Electron Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2970-2972.
- M. J. Johnson et al., “Design of the FRIB Cryomodule”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD006, pp. 2507-2509.
- F. Staufenbiel, S. Riemann, G. A. Moortgat-Pick, and A. Ushakov, “Heat Load, Stress and Reaction Force Studies of a Polarized Positron Production Target for the Future International Linear Collider”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1331-1333.
- I. Oya et al., “A Readout and Control System for a CTA Prototype Telescope”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU026, pp. 494-497.
- T. Sugimoto, K. Ishii, H. Matsumoto, T. Shibata, and K. Fan, “Performance of a Compensation Kicker Magnet for J-PARC Main Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3588-3590.
- T. Atkinson et al., “Commissioning of the 50 MeV Preinjector Linac for the BESSY II Facility”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC108, pp. 3140-3142.
- C. Mitsuda et al., “Suppression of Stored Beam Oscillation at Injection by Fast Kicker in the SPring-8 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 280-282.
- T. Takayanagi, Y. Irie, J. Kamiya, T. Kawakubo, and I. Sakai, “Design of the Pulse Bending Magnets for the Injection System of the 3-GeV RCS in J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT007, pp. 1048-1050.
- G. Asova et al., “First Results with Tomographic Reconstruction of the Transverse Phase Space at PITZ”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA30, pp. 543-546.
- K. Oide et al., “A Few Issues on the Upgrade of KEKB B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAI01, pp. 23-27.
- A. I. Sukhanov, A. Saini, N. Solyak, and I. S. Tropin, “Model of Dark Current in SRF Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1834-1836.
- J. Tanaka et al., “Operation of the KEK 20 MeV Injector Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F04, pp. 333-337.
- Y. Yamamoto, H. Hayano, E. Kako, S. Noguchi, T. Shishido, and K. Watanabe, “Progress of High Gradient Performance in STF 9-cell Cavities at KEK”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC013, pp. 2233-2235.
- J. Wang et al., “The Effect of Magnetic Field on the Secondary Electron Yield in the Ultra-High Vacuum Environment”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3281-3283.
- I. Hofmann, “Revisiting the Longitudinal 90 Degree Limit for Superconducting Linear Accelerators”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 369-372.
- R. Bartolini, R. T. Fielder, and C. A. Thomas, “Loss Factor and Impedance Analysis for the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA052, pp. 1826-1828.
- S. X. Peng et al., “Study on Space Charge Compensation of Low Energy High Intensity Ion Beam in Peking University”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 453-457.
- A. Miura and H. Matsumoto, “Development of an S-Band High-Power Pillbox-Type RF Window”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-30, pp. 124-126.
- K. Fan, K. Ishii, H. Matsumoto, N. Matsumoto, T. Shibata, and T. Sugimoto, “New Design of J-PARC Main Ring Injection System for High Beam Power Operation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2097-2099.
- G. Vanbavinckhove et al., “Geometry and Optics of the Electrostatic ELENA Transfer Lines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO051, pp. 1985-1987.
- Z. Y. Guo et al., “Recent Studies on Beam-Photoelectron Instability in BEPC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRBR3, pp. 633-635.
- G. X. Xia, M. Ivanyan, K. Manukyan, K. A. Sargsyan, and R. Wanzenberg, “Ion Effect Issues in PETRA III”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP073, pp. 3371-3373.
- A. Vnuchenko et al., “Start-to-End Beam Dynamic Simulations for PRAE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 495-498.
- M. A. C. Cummings and D. M. Kaplan, “Muon Cooling Research and Development”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB089, pp. 1798-1800.
- J. W. Staples et al., “Design of a VHF-band RF Photoinjector with MegaHertz Beam Repetition Rate”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN117, pp. 2990-2992.
- T. J. Roberts and D. M. Kaplan, “G4Beamline Simulation Program for Matter-dominated Beamlines”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN103, pp. 3468-3470.
- S. A. Kostromin, G. A. Karamysheva, N. A. Morozov, and E. Samsonov, “Study of Beam Capture in Compact Synchrocyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT015, pp. 353-355.
- G. X. Xia, “Ion Instability Study for the ILC 3 km Damping Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP103, pp. 1671-1673.
- T. Ha, “Design Study of Vacuum System for a 4th Generation Storage Ring in Korea”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOOA03, pp. XX-XX.
- H. Yamada et al., “Commissioning of the World Smallest Electron Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D011, pp. 692-694.
- A. Ushakov, S. Riemann, and A. Schaelicke, “Polarized Positron Production and Tracking at the ILC Positron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN017, pp. 2742-2744.
- R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631.
- Ya. V. Getmanov, O. A. Shevchenko, T. Atkinson, and N. Vinokurov, “Longitudinal Stability of Multiturn ERL with Split Accelerating Structure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA047, pp. 2226-2228.
Back to search