Favourites
For Word
[n] N. Yu. Kazarinov, G. Gulbekyan, V. I. Kazacha, V. N. Melnikov, and V. I. Mironov, “Scheme for Flattening of Ion Density Distribution on a Target”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN079, pp. 1556-1558.
[n] S. Khodyachykh et al., “Design of the Multipurpose Dispersive Section at PITZ”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH020, pp. 601-604.
[n] Y.-S. Cheng et al., “Control System Development of the TLS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1400-1404. doi:10.18429/JACoW-ICALEPCS2017-THPHA026
[n] C.-C. Kuo et al., “Design Status of the Taiwan Photon Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC004, pp. 1986-1988.
[n] I. V. Pogorelov, K. Amyx, and P. Messmer, “Accelerating Beam Dynamics Simulations with GPUs”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP164, pp. 1800-1802.
[n] N. Simos, J. Brodowski, N. Catalan-Lasheras, H. Ludewig, and J. Wei, “Thermo-Mechanical Response of the Halo Intercepts Interacting with the SNS Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH083, pp. 1402-1404.
[n] Y. Shobuda, N. Hayashi, T. Takayanagi, Y. Irie, and T. Toyama, “A Trial to Reduce the Kicker Impedance of 3-GeV RCS in J-PARC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA010, pp. 1742-1744.
[n] R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1308-1313. doi:10.18429/JACoW-IPAC2015-TUXC2
[n] F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
[n] M. Umezawa et al., “Beam Commissioning of the New Proton Therapy System for University of Tsukuba”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA005, pp. 648-650.
[n] S. Dewan, F. Voelker, R. Holmes, K. Reiniger, and J. Zeng, “A 250 kW Four Quadrant Switch Mode Converter for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH015, pp. 3696-3698.
[n] H.-J. Tsai et al., “Closed Orbit Correction and Orbit Stabilization Control for TPS Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC041, pp. 3068-3070.
[n] S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
[n] J. W. Kim, C. C. Yun, “Uses Of The Experimental Area Of A Proton Therapy Facility For Biomedical Experiments”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 260-264.
[n] L. Xiao et al., “TTF3 Power Coupler Thermal Analysis for LCLS-II CW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3503-3505. doi:10.18429/JACoW-IPAC2015-WEPWI007
[n] M. Watanabe et al., “Operation and Current Status of Injection, Extraction, Kicker Magnet and the Power Supply for J-PARC 3 GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD052, pp. 3629-3631.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] D. V. Senkov, A. M. Batrakov, A. D. Chernyakin, V. A. Kiselev, A. V. Pavlenko, and A. N. Zhuravlev, “Pulse Generators for Septums and Bumps of Injection and Extraction Systems of NSLS-II Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA029, pp. 726-728.
[n] R. J. Bakker et al., “FERMI@ELETTRA: 100 nm - 10 nm Single Pass FEL User Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF037, pp. 387-389.
[n] K. Fong TRIUMF, “New Technologies In The Design Of Rf Controls For Accelerators”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 449-454.
[n] L. J. Rybarcyk, “Method for Obtaining Proper Injection Steering into the LAMPF DTL”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-77, pp. 547-548.
[n] G. M. Lee and C. D. Curtis, “High Gradient Accelerating Column Design and Construction”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 129-134.
[n] K. Okabe, Y. Mori, and Y. Sato, “Development Of FFAG-Erit System For Bnct”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 210-214.
[n] B. Erdelyi et al., “An Accumulator/Pre-Booster for the Medium-Energy Electron Ion Collider at JLab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP206, pp. 1873-1875.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Yu. Kazarinov, G. Gulbekyan, V. I. Kazacha, V. N. Melnikov, and V. I. Mironov, “Scheme for Flattening of Ion Density Distribution on a Target”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN079, pp. 1556-1558.
- S. Khodyachykh et al., “Design of the Multipurpose Dispersive Section at PITZ”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH020, pp. 601-604.
- Y.-S. Cheng et al., “Control System Development of the TLS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1400-1404.
- C.-C. Kuo et al., “Design Status of the Taiwan Photon Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC004, pp. 1986-1988.
- I. V. Pogorelov, K. Amyx, and P. Messmer, “Accelerating Beam Dynamics Simulations with GPUs”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP164, pp. 1800-1802.
- N. Simos, J. Brodowski, N. Catalan-Lasheras, H. Ludewig, and J. Wei, “Thermo-Mechanical Response of the Halo Intercepts Interacting with the SNS Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH083, pp. 1402-1404.
- Y. Shobuda, N. Hayashi, T. Takayanagi, Y. Irie, and T. Toyama, “A Trial to Reduce the Kicker Impedance of 3-GeV RCS in J-PARC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA010, pp. 1742-1744.
- R. T. Neuenschwander, L. Liu, S. R. Marques, A. R. D. Rodrigues, and R. M. Seraphim, “Engineering Challenges of Future Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1308-1313.
- F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
- M. Umezawa et al., “Beam Commissioning of the New Proton Therapy System for University of Tsukuba”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA005, pp. 648-650.
- S. Dewan, F. Voelker, R. Holmes, K. Reiniger, and J. Zeng, “A 250 kW Four Quadrant Switch Mode Converter for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH015, pp. 3696-3698.
- H.-J. Tsai et al., “Closed Orbit Correction and Orbit Stabilization Control for TPS Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC041, pp. 3068-3070.
- S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
- J. W. Kim, C. C. Yun, “Uses Of The Experimental Area Of A Proton Therapy Facility For Biomedical Experiments”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 260-264.
- L. Xiao et al., “TTF3 Power Coupler Thermal Analysis for LCLS-II CW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3503-3505.
- M. Watanabe et al., “Operation and Current Status of Injection, Extraction, Kicker Magnet and the Power Supply for J-PARC 3 GeV RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD052, pp. 3629-3631.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- D. V. Senkov, A. M. Batrakov, A. D. Chernyakin, V. A. Kiselev, A. V. Pavlenko, and A. N. Zhuravlev, “Pulse Generators for Septums and Bumps of Injection and Extraction Systems of NSLS-II Booster”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA029, pp. 726-728.
- R. J. Bakker et al., “FERMI@ELETTRA: 100 nm - 10 nm Single Pass FEL User Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF037, pp. 387-389.
- K. Fong TRIUMF, “New Technologies In The Design Of Rf Controls For Accelerators”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 449-454.
- L. J. Rybarcyk, “Method for Obtaining Proper Injection Steering into the LAMPF DTL”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-77, pp. 547-548.
- G. M. Lee and C. D. Curtis, “High Gradient Accelerating Column Design and Construction”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 129-134.
- K. Okabe, Y. Mori, and Y. Sato, “Development Of FFAG-Erit System For Bnct”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 210-214.
- B. Erdelyi et al., “An Accumulator/Pre-Booster for the Medium-Energy Electron Ion Collider at JLab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP206, pp. 1873-1875.
Back to search