Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
[n] S. C. Joshi et al., “Commissioning of Vertical Test Stand Facility for 2 K Testing of Superconducting Cavities at RRCAT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP117, pp. 695-698.
[n] K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2698-2701. doi:10.18429/JACoW-IPAC2015-WEPJE012
[n] N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1444-1448. doi:10.18429/JACoW-ICALEPCS2023-THPDP057
[n] R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516.
[n] P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 767-770.
[n] G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
[n] A. Chabert, J. Ferme, G. Gendreau, P. Lapostolle, and P. Yvon, “Chromatic Correlations at Injection and Related Ejection Problems is Separated Sector Cyclotrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3612-3615.
[n] M. Iberler et al., “Development and Investigation of Pulsed Pinch Plasmas for the Application as FAIR Plasma Stripper”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1387-1389. doi:10.18429/JACoW-IPAC2016-TUPMR056
[n] A. Krusche, H. Riege, and G. C. Schneider, “Automatic Procedures in the CPS Multiturn Shaving Ejection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3340-3343.
[n] D. P. Piso, M. Rescic, G. Cijan, and R. Schmidt, “A PLC Test Bench at ESS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3171-3173. doi:10.18429/JACoW-IPAC2014-THPRO118
[n] K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1423-1427. doi:10.18429/JACoW-ICALEPCS2017-THPHA033
[n] L. Cultrera et al., “Growth and Characterization of Bialkali Photocathodes for Cornell ERL Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP244, pp. 1942-1944.
[n] H. V. Walz, R. C. Agostini, L. Barker, R. Cherkassky, T. Constant, and R. Mathieson, “Distributed Supervisory Protection Interlock System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1928-1931.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Ishii, T. Fukui, Y. Furukawa, T. Nakatani, and T. Ohata and R, “Upgrade of SPring-8 Beamline Network with VLAN Technology over Gigabit Ethernet”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP056, pp. XX-XX.
- S. C. Joshi et al., “Commissioning of Vertical Test Stand Facility for 2 K Testing of Superconducting Cavities at RRCAT”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP117, pp. 695-698.
- K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2698-2701.
- N. Voumard, N. Magnin, and P. Van Trappen, “SPS Beam Dump Enhancements on Tracking and Synchronization”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP057, pp. 1444-1448.
- R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 515-516.
- P. Mandrillon et al., “Advances of the Feasibility Study of the European Light Ion Medical Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 767-770.
- G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
- A. Chabert, J. Ferme, G. Gendreau, P. Lapostolle, and P. Yvon, “Chromatic Correlations at Injection and Related Ejection Problems is Separated Sector Cyclotrons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3612-3615.
- M. Iberler et al., “Development and Investigation of Pulsed Pinch Plasmas for the Application as FAIR Plasma Stripper”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1387-1389.
- A. Krusche, H. Riege, and G. C. Schneider, “Automatic Procedures in the CPS Multiturn Shaving Ejection”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3340-3343.
- D. P. Piso, M. Rescic, G. Cijan, and R. Schmidt, “A PLC Test Bench at ESS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3171-3173.
- K. Moriyama, T. Nakatani, H. O. Ohshita, T. Tomohiro, and Y. Yasu, “Development of Status Analysis System Based on ELK Stack at J-PARC MLF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1423-1427.
- L. Cultrera et al., “Growth and Characterization of Bialkali Photocathodes for Cornell ERL Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP244, pp. 1942-1944.
- H. V. Walz, R. C. Agostini, L. Barker, R. Cherkassky, T. Constant, and R. Mathieson, “Distributed Supervisory Protection Interlock System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1928-1931.
Back to search