Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Devanz, M. Luong, and A. Mosnier, “Numerical Simulations of Dynamic Lorentz Detuning of SC Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO012, pp. 2220-2222.
[n] K. Fukami et al., “Remote Tilt-control System of Injection Bump Magnet in the SPring-8 Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC076, pp. 2172-2174.
[n] S. Zaremba et al., “Design of the Cyclone?«70p”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 175-177. doi:10.18429/JACoW-Cyclotrons2016-TUP06
[n] H. Borsch et al., “Operating of the Magnet Power Converters for the Cooler Synchrotron COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1432-1435.
[n] J. Wu and B. Yang, “Transient Thermal Stress Wave Analysis of a Thin Diamond Crystal Under Laser Heat Load”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 72-75. doi:10.18429/JACoW-FEL2017-MOP019
[n] N. Higashi, K. Harada, T. Honda, Y. Kobayashi, N. Nakamura, and K. Hirano, “Current and Future of Storage Ring Based Light Sources in KEK”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 17-21. doi:10.18429/JACoW-FLS2018-MOP1WB03
[n] A. Hutton, “Optimization of Luminosity for e-p Collisions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3520-3523.
[n] V. Senichev et al., “Quasi-Frozen Spin Concept of Deuteron Storage Ring as an Instrument to Search for the Electric Dipole Moment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2275-2277. doi:10.18429/JACoW-IPAC2017-TUPVA084
[n] M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1951-1953. doi:10.18429/JACoW-IPAC2019-TUPTS009
[n] H. G. Khodzhibagiyan et al., “Status of the Design and Test of Superconducting Magnets for the NICA Project”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR03, pp. 149-151.
[n] B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
[n] A. Nadji et al., “First Results of the Commissioning of SOLEIL Storage Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS009, pp. 3284-3286.
[n] S. Krinsky, “Accelerator Physics Challenges for the NSLS-II Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3PBI02, pp. 49-53.
[n] C. Hovater, “The CEBAF RF Separator System”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP12, pp. 77-79.
[n] B. Lorentz et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT043, pp. 1246-1248.
[n] G-H. Hemelsoet and V. Chohan, “Cryogenic Magnet Tests for the LHC: Process Operation Using Web-based Tools and Facilities”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_012.
[n] D. H. Rice, “CESR-C: A Wiggler-Dominated Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBKI01, pp. 48-52.
[n] A. Schempp, “Properties of the VE-RFQ-Injector for the ISL-Cyclotron”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP02, pp. 50-52.
[n] K. Saito, “Behavior of Air Exposure of Medium ?ƒ(=0.45) Niobium SC Cavity”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PH004, pp. XX-XX.
[n] H. Hayano, H. Matsumoto, T. Naito, S. Takeda, T. Asaka, and M. Schmitz, “An 80 MeV Injector for ATF Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-72, pp. 236-238.
[n] K. Saito, “Basic Study for Degradation Free Final Horizontal Cavity Assembly with High Gradient Niobium SC Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR020, pp. XX-XX.
[n] Y. Funakoshi, “Recent Progress of KEKB”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN041, pp. 1475-1477.
[n] R.W de Leeuw, “Design and Construction of Standing Wave Accelerating Structures at TUE”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP16, pp. 86-88.
[n] N. Mounet, E. M?®tral, and G. Rumolo, “Simulation of Multibunch Instabilities with the HEADTAIL Code”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THSDI2, pp. 262-266.
[n] D. Spence, “Plasma Modified Production of High-current, High-purity cw H+, D+ and H- Beams from Microwave-driven Sources”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP10, pp. 71-73.
[n] H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
[n] W. Weingarten, “The Dependence on the RF Frequency of the Field Dependent Part of the Surface Resistance of Niobium Sputter Coated Copper Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR009, pp. XX-XX.
[n] J. E. Wilmarth, M. T. Smith, and T. L. Tomei, “Radiation protection system installation for the accelerator production of tritium/low energy demonstration accelerator project (APT/LEDA)”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT04, pp. XX-XX.
[n] R. Tomas, M. Giovannozzi, and R. de Maria, “Non-linear Correction Schemes for the Phase 1 LHC Insertion Region Upgrade and Dynamic Aperture Studies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP024, pp. 2569-2571.
[n] A. Schempp, “A Novel Design for Ion Beam Funneling by the use of a Two-Beam RFQ and a Multigap-deflector”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP05, pp. 59-61.
[n] A. Schempp, “Design of compact RFQ's”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP03, pp. 53-55.
[n] L. J. Mao and J. Dietrich, “Simulation of High-Energy Electron Cooling at COSY with BETACOOL Program”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUPS05, pp. 95-98.
[n] W. Chou and C. M. Ankenbrandt, “Summary of the Fermilab Proton Driver Design Study”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA012, pp. 594-596.
[n] A. L. Edelen, S. Biedron, S. V. Milton, and P. J. M. van der Slot, “Using A Neural Network Control Policy For Rapid Switching Between Beam Parameters in an FEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 488-491. doi:10.18429/JACoW-FEL2017-WEP031
[n] P. S. K. Lam, “A Preconceptual Accelerator-Breeder Design for Fissile Material and Energy Production”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3048-3050.
[n] W. Barth, “Space Charge Dominated Beam Transport in the 1.4MeV/u-UNILAC-Stripper Section”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP32, pp. 131-133.
[n] H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Low Temperature Test of a Low-Beta Elliptical Cavity for PEFP Linac Extension”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO023, pp. 117-121.
[n] Dmitry Berkaev; Alexander Kirpotin; Ivan Koop; Alexander Lysenko; Igor Nesterenko; Evgeny Perevedentsev; Yuri Rogovsky; Alexander Romanov; Petr Shatunov; Dmitry Shwartz; Alexander Skrinsky; Yuri Shatunov, “STATUS AND PROGRESS VEPP-2000”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOBAU01, pp. XX-XX.
[n] H. Safa, “High Field Behavior of SCRF Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper MA008, pp. XX-XX.
[n] A. L. Karuzskii, A. E. Krapivka, A. I. Golovashkin, and A. V. Perestoronin, “Nonlinear Effects in He-filled Superconducting RF Systems”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR017, pp. XX-XX.
[n] J. A. Nolen, “Overview of Linac Applications at Future Radioactive Beam Facilities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MO204, pp. 32-38.
[n] A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
[n] M. C. Thompson et al., “Observation of Multi-GeV Breakdown Thresholds in Dielectric Wakefield Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS015, pp. 3026-3028.
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] J. W. Staples, “All-Electrostatic Split LEBT Test Results”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP41, pp. 157-159.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Devanz, M. Luong, and A. Mosnier, “Numerical Simulations of Dynamic Lorentz Detuning of SC Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO012, pp. 2220-2222.
- K. Fukami et al., “Remote Tilt-control System of Injection Bump Magnet in the SPring-8 Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC076, pp. 2172-2174.
- S. Zaremba et al., “Design of the Cyclone?«70p”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 175-177.
- H. Borsch et al., “Operating of the Magnet Power Converters for the Cooler Synchrotron COSY-Juelich”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1432-1435.
- J. Wu and B. Yang, “Transient Thermal Stress Wave Analysis of a Thin Diamond Crystal Under Laser Heat Load”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 72-75.
- N. Higashi, K. Harada, T. Honda, Y. Kobayashi, N. Nakamura, and K. Hirano, “Current and Future of Storage Ring Based Light Sources in KEK”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 17-21.
- A. Hutton, “Optimization of Luminosity for e-p Collisions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3520-3523.
- V. Senichev et al., “Quasi-Frozen Spin Concept of Deuteron Storage Ring as an Instrument to Search for the Electric Dipole Moment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2275-2277.
- M. P. Stockli et al., “Operating the SNS RF H? Ion Source with a 10% Duty Factor”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1951-1953.
- H. G. Khodzhibagiyan et al., “Status of the Design and Test of Superconducting Magnets for the NICA Project”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR03, pp. 149-151.
- B. G. Chidley, J. C. Brown, S. B. Hodge, J. H. Ormrod, and J. Ungrin, “The Chalk River High Current Test Facility”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I02, pp. 218-225.
- A. Nadji et al., “First Results of the Commissioning of SOLEIL Storage Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS009, pp. 3284-3286.
- S. Krinsky, “Accelerator Physics Challenges for the NSLS-II Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3PBI02, pp. 49-53.
- C. Hovater, “The CEBAF RF Separator System”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP12, pp. 77-79.
- B. Lorentz et al., “Status of the Cooler Synchrotron COSY-Juelich”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT043, pp. 1246-1248.
- G-H. Hemelsoet and V. Chohan, “Cryogenic Magnet Tests for the LHC: Process Operation Using Web-based Tools and Facilities”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_012.
- D. H. Rice, “CESR-C: A Wiggler-Dominated Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZBKI01, pp. 48-52.
- A. Schempp, “Properties of the VE-RFQ-Injector for the ISL-Cyclotron”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP02, pp. 50-52.
- K. Saito, “Behavior of Air Exposure of Medium ?ƒ(=0.45) Niobium SC Cavity”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PH004, pp. XX-XX.
- H. Hayano, H. Matsumoto, T. Naito, S. Takeda, T. Asaka, and M. Schmitz, “An 80 MeV Injector for ATF Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-72, pp. 236-238.
- K. Saito, “Basic Study for Degradation Free Final Horizontal Cavity Assembly with High Gradient Niobium SC Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR020, pp. XX-XX.
- Y. Funakoshi, “Recent Progress of KEKB”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN041, pp. 1475-1477.
- R.W de Leeuw, “Design and Construction of Standing Wave Accelerating Structures at TUE”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP16, pp. 86-88.
- N. Mounet, E. M?®tral, and G. Rumolo, “Simulation of Multibunch Instabilities with the HEADTAIL Code”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THSDI2, pp. 262-266.
- D. Spence, “Plasma Modified Production of High-current, High-purity cw H+, D+ and H- Beams from Microwave-driven Sources”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP10, pp. 71-73.
- H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
- W. Weingarten, “The Dependence on the RF Frequency of the Field Dependent Part of the Surface Resistance of Niobium Sputter Coated Copper Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR009, pp. XX-XX.
- J. E. Wilmarth, M. T. Smith, and T. L. Tomei, “Radiation protection system installation for the accelerator production of tritium/low energy demonstration accelerator project (APT/LEDA)”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT04, pp. XX-XX.
- R. Tomas, M. Giovannozzi, and R. de Maria, “Non-linear Correction Schemes for the Phase 1 LHC Insertion Region Upgrade and Dynamic Aperture Studies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP024, pp. 2569-2571.
- A. Schempp, “A Novel Design for Ion Beam Funneling by the use of a Two-Beam RFQ and a Multigap-deflector”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP05, pp. 59-61.
- A. Schempp, “Design of compact RFQ's”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP03, pp. 53-55.
- L. J. Mao and J. Dietrich, “Simulation of High-Energy Electron Cooling at COSY with BETACOOL Program”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper TUPS05, pp. 95-98.
- W. Chou and C. M. Ankenbrandt, “Summary of the Fermilab Proton Driver Design Study”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA012, pp. 594-596.
- A. L. Edelen, S. Biedron, S. V. Milton, and P. J. M. van der Slot, “Using A Neural Network Control Policy For Rapid Switching Between Beam Parameters in an FEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 488-491.
- P. S. K. Lam, “A Preconceptual Accelerator-Breeder Design for Fissile Material and Energy Production”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3048-3050.
- W. Barth, “Space Charge Dominated Beam Transport in the 1.4MeV/u-UNILAC-Stripper Section”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP32, pp. 131-133.
- H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Low Temperature Test of a Low-Beta Elliptical Cavity for PEFP Linac Extension”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO023, pp. 117-121.
- Dmitry Berkaev; Alexander Kirpotin; Ivan Koop; Alexander Lysenko; Igor Nesterenko; Evgeny Perevedentsev; Yuri Rogovsky; Alexander Romanov; Petr Shatunov; Dmitry Shwartz; Alexander Skrinsky; Yuri Shatunov, “STATUS AND PROGRESS VEPP-2000”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOBAU01, pp. XX-XX.
- H. Safa, “High Field Behavior of SCRF Cavities”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper MA008, pp. XX-XX.
- A. L. Karuzskii, A. E. Krapivka, A. I. Golovashkin, and A. V. Perestoronin, “Nonlinear Effects in He-filled Superconducting RF Systems”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR017, pp. XX-XX.
- J. A. Nolen, “Overview of Linac Applications at Future Radioactive Beam Facilities”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MO204, pp. 32-38.
- A. H. Botha and H. N. Jungwirth, “The Status of the South African National Accelerator Centre”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F04, pp. 263-266.
- M. C. Thompson et al., “Observation of Multi-GeV Breakdown Thresholds in Dielectric Wakefield Structures”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS015, pp. 3026-3028.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- J. W. Staples, “All-Electrostatic Split LEBT Test Results”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP41, pp. 157-159.
Back to search