Favourites
For Word
[n] K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
[n] G. Vashchenko et al., “Emittance Optimization for Different Bunch Charges with Upgraded Setup at PITZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC115, pp. 3155-3157.
[n] T. Walter, I. Mahns, and H. Schlarb, “MICROTCA TECHNOLOGY LAB AT DESY: CURRENT CASES IN TECHNOLOGY TRANSFER”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3459-3461. doi:10.18429/JACoW-IPAC2019-THPMP007
[n] M. D. McCaughan, J. F. Benesch, Y. Roblin, and T. Satogata, “First e-/Photon Commissioning Results for the GlueX Experiment/Hall D at CEBAF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1916-1919. doi:10.18429/JACoW-IPAC2015-TUPMA036
[n] G. Bassi, A. Blednykh, S. Krinsky, and J. Rose, “Self-Consistent Simulations of Passive Landau Cavity Effects”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA03, pp. 177-179.
[n] S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1959-1961. doi:10.18429/JACoW-IPAC2015-TUPMA056
[n] D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1913-1915. doi:10.18429/JACoW-IPAC2015-TUPMA035
[n] J. R. Calvey et al., “Modeling and Simulation of Retarding Field Analyzers at CESRTA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR088, pp. 3138-3140.
[n] J. S. Berg et al., “A Non-scaling Fixed Field Alternating Gradient Accelerator for the Final Acceleration Stage of the International Design Study of the Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ007, pp. 832-834.
[n] R. Bartolini and F. Schmidt, “Non-Linear Ring Model Calibration with Frequency Analysis of Betatron Oscillations”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE015, pp. 1452-1454.
[n] G. H. Mackenzie, G. Dutto, R. E. Laxdal, J. B. Pearson, R. Worsham, and M. Zach, “Efficient Extraction of H-Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1710-1713.
[n] L. Ducimeti?¿re, “Advances of Transmission Line Kicker Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB002, pp. 235-239.
[n] S. B. van der Geer, O. J. Luiten, M. J. de Loos, G. P?Âplau, and U. van Rienen, “Adaptive Space-charge Meshing in the General Particle Tracer Code”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP133, pp. 1728-1730.
[n] D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4992-4994. doi:10.18429/JACoW-IPAC2018-THPML132
[n] W. Thongpakdi and S. Rimjaem, “Studies on Electron Beam Injector System for Linac-based Coherent Thz Source in Thailand”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3366-3368. doi:10.18429/JACoW-IPAC2016-THPMB052
[n] S. Posen and M. Liepe, “Stoichiometric Nb3Sn in First Samples Coated at Cornell”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO066, pp. 886-889.
[n] T. Walter, M. Fenner, K. Kull, and H. Schlarb, “MicroTCA Technology Lab at DESY: Start-Up Phase Summary”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3659-3661. doi:10.18429/JACoW-IPAC2017-THOAB2
For LaTeX
Use Complete Form
For BibTeX
References
- K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
- G. Vashchenko et al., “Emittance Optimization for Different Bunch Charges with Upgraded Setup at PITZ”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC115, pp. 3155-3157.
- T. Walter, I. Mahns, and H. Schlarb, “MICROTCA TECHNOLOGY LAB AT DESY: CURRENT CASES IN TECHNOLOGY TRANSFER”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3459-3461.
- M. D. McCaughan, J. F. Benesch, Y. Roblin, and T. Satogata, “First e-/Photon Commissioning Results for the GlueX Experiment/Hall D at CEBAF”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1916-1919.
- G. Bassi, A. Blednykh, S. Krinsky, and J. Rose, “Self-Consistent Simulations of Passive Landau Cavity Effects”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA03, pp. 177-179.
- S. Seletskiy et al., “Analysis of Possible Beam Losses in the NSLS II BSR Transfer Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1959-1961.
- D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1913-1915.
- J. R. Calvey et al., “Modeling and Simulation of Retarding Field Analyzers at CESRTA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR088, pp. 3138-3140.
- J. S. Berg et al., “A Non-scaling Fixed Field Alternating Gradient Accelerator for the Final Acceleration Stage of the International Design Study of the Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ007, pp. 832-834.
- R. Bartolini and F. Schmidt, “Non-Linear Ring Model Calibration with Frequency Analysis of Betatron Oscillations”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE015, pp. 1452-1454.
- G. H. Mackenzie, G. Dutto, R. E. Laxdal, J. B. Pearson, R. Worsham, and M. Zach, “Efficient Extraction of H-Ions from the TRIUMF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1710-1713.
- L. Ducimeti?¿re, “Advances of Transmission Line Kicker Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB002, pp. 235-239.
- S. B. van der Geer, O. J. Luiten, M. J. de Loos, G. P?Âplau, and U. van Rienen, “Adaptive Space-charge Meshing in the General Particle Tracer Code”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP133, pp. 1728-1730.
- D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4992-4994.
- W. Thongpakdi and S. Rimjaem, “Studies on Electron Beam Injector System for Linac-based Coherent Thz Source in Thailand”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3366-3368.
- S. Posen and M. Liepe, “Stoichiometric Nb3Sn in First Samples Coated at Cornell”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO066, pp. 886-889.
- T. Walter, M. Fenner, K. Kull, and H. Schlarb, “MicroTCA Technology Lab at DESY: Start-Up Phase Summary”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3659-3661.
Back to search
