Favourites
For Word
[n] J. Fuchs, “Enhanced proton and neutron production using the ultra-short (24 fs) and high-power (2 PW) Apollon laser facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEWD1, unpublished.
[n] C. Eckardt et al., “Implementation of a Polarized Electron Source at the S-DALINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC019, pp. 4083-4085.
[n] W. Decking, K. Floettmann, and J. Rossbach, “Measurement of Slow Closed-Orbit Motion in the HERA Electron Ring in Correlation with Ground Motion”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1449-1452.
[n] B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
[n] S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63.
[n] S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
[n] H. Hartmann and T. Kerner, “RHIC Beam Synchronous Trigger Module”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP19, pp. 696-698.
[n] K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
[n] A. Cucchetti and L. M. Young, “Design of a 10-MeV Photoinjector Accelerator for ELFA”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH424, pp. 650-652.
[n] V. Sahakyan, W. Decking, and A. Tarloyan, “Low charge electron beam SASE parameter study for European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE002, pp. 2144-2146.
[n] S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
[n] T. Kerner, C. R. Conkling Jr, and B. Oerter, “V123 Beam Synchronous Encoder Module”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP20, pp. 699-701.
[n] I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
[n] J. Lewellen et al., “Report From Working Group 1 - Injectors, Guns, & Cathodes - RF and SRF Guns”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG103, pp. 24-36.
[n] D. Gorelov, T. Grimm, W. Hartung, F. Marti, X. Wu, and R. York, “Analysis of a Multi-Spoke Option for the RIA Driver Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB056, pp. 2849-2851.
[n] M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
[n] S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n] G. O. Bolme et al., “Proton Beam Studies with a 1.25 MeV, CW Radio Frequency Quadrupole Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4082, pp. 594-596.
[n] T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
[n] B. Petersen, “High Gradient CW Modules for FEL/Standard Modules”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THWG4, pp. 752-754.
[n] T. Grimm, T. R. Bieler, C. Compton, and H. Jiang, “Mechanical Properties, Microstructure, and Texture of Electron Beam Butt Welds in High Purity Niobium”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB069, pp. 1359-1361.
[n] M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Closed Orbit Distortion and Correction of the PLS 2 GeV Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 646-649.
[n] O. Mouton and D. Guilhem, “Thin Foil Physical Effects on the Transport of an Intense Relativistic Electron Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE097, pp. 1374-1376.
[n] N. Steinhau-K??hl, L. Lilje, A. Matheisen, B. Petersen, M. Schm?Âkel, and H. Weitk?ñmper, “Update on the Experiences of Electro Polishing of Multi-Cell Resonators at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP05, pp. 464-466.
[n] M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
[n] I. S. Ko, C. Kim, G. H. Kim, J. U. Kim, H. J. Lee, and H. Suk, “Laser Wake Field Acceleration Research at KERI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI077, pp. 992-994.
[n] A. Matheisen, B. van der Horst, B. Petersen, S. S?ñgebarth, and P. Schilling, “Preparation Sequences for Electro-Polished High Gradient Multi-Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP08, pp. 470-472.
[n] V. Vuppala, E. T. Berryman, L. R. Dalesio, and S. Peng, “Proteus: FRIB Configuration Database”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC031, pp. 623-626.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Fuchs, “Enhanced proton and neutron production using the ultra-short (24 fs) and high-power (2 PW) Apollon laser facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEWD1, unpublished.
- C. Eckardt et al., “Implementation of a Polarized Electron Source at the S-DALINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC019, pp. 4083-4085.
- W. Decking, K. Floettmann, and J. Rossbach, “Measurement of Slow Closed-Orbit Motion in the HERA Electron Ring in Correlation with Ground Motion”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1449-1452.
- B. Petersen, “Industrialization of Superconducting Accelerator Module Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM03, pp. 1964-1966.
- S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63.
- S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
- H. Hartmann and T. Kerner, “RHIC Beam Synchronous Trigger Module”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP19, pp. 696-698.
- K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
- A. Cucchetti and L. M. Young, “Design of a 10-MeV Photoinjector Accelerator for ELFA”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH424, pp. 650-652.
- V. Sahakyan, W. Decking, and A. Tarloyan, “Low charge electron beam SASE parameter study for European XFEL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE002, pp. 2144-2146.
- S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290.
- T. Kerner, C. R. Conkling Jr, and B. Oerter, “V123 Beam Synchronous Encoder Module”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP20, pp. 699-701.
- I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217.
- J. Lewellen et al., “Report From Working Group 1 - Injectors, Guns, & Cathodes - RF and SRF Guns”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG103, pp. 24-36.
- D. Gorelov, T. Grimm, W. Hartung, F. Marti, X. Wu, and R. York, “Analysis of a Multi-Spoke Option for the RIA Driver Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB056, pp. 2849-2851.
- M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1886-1889.
- S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1419-1421.
- G. O. Bolme et al., “Proton Beam Studies with a 1.25 MeV, CW Radio Frequency Quadrupole Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4082, pp. 594-596.
- T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
- B. Petersen, “High Gradient CW Modules for FEL/Standard Modules”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THWG4, pp. 752-754.
- T. Grimm, T. R. Bieler, C. Compton, and H. Jiang, “Mechanical Properties, Microstructure, and Texture of Electron Beam Butt Welds in High Purity Niobium”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB069, pp. 1359-1361.
- M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Closed Orbit Distortion and Correction of the PLS 2 GeV Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 646-649.
- O. Mouton and D. Guilhem, “Thin Foil Physical Effects on the Transport of an Intense Relativistic Electron Beam”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE097, pp. 1374-1376.
- N. Steinhau-K??hl, L. Lilje, A. Matheisen, B. Petersen, M. Schm?Âkel, and H. Weitk?ñmper, “Update on the Experiences of Electro Polishing of Multi-Cell Resonators at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP05, pp. 464-466.
- M. Schalwat, K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and N. Steinhau-Kuehl, “Update of the DESY Infrastructure for Cavity Preparation”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO018, pp. 401-404.
- I. S. Ko, C. Kim, G. H. Kim, J. U. Kim, H. J. Lee, and H. Suk, “Laser Wake Field Acceleration Research at KERI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI077, pp. 992-994.
- A. Matheisen, B. van der Horst, B. Petersen, S. S?ñgebarth, and P. Schilling, “Preparation Sequences for Electro-Polished High Gradient Multi-Cell Cavities at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP08, pp. 470-472.
- V. Vuppala, E. T. Berryman, L. R. Dalesio, and S. Peng, “Proteus: FRIB Configuration Database”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC031, pp. 623-626.
Back to search