Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Vogel et al., “Status of the Klystrons for the European XFEL after Commissioning and First User Operation Phase”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 420-422. doi:10.18429/JACoW-FEL2019-WEP045
[n] A. Djaloeis and Sudjatmoko, “Activities on the Development and Application of Particle Accelerators in Indonesia”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4A003, pp. 12-16.
[n] K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2162-2164. doi:10.18429/JACoW-IPAC2014-WEPRO088
[n] G. W. Dodson, “Challenges in the User Facility Reliability Landscape”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLS02, pp. XX-XX.
[n] R. T. P. D, S. Jolly, J. K. Jones, B. D. Muratori, and S. B. van der Geer, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC079, pp. 319-321.
[n] L. Lari et al., “Evaluation of the Combined Betatron and Momentum Cleaning in Point 3 in Terms of Cleaning Efficiency and Energy Deposition for the LHC Collimation Upgrade”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ032, pp. 3762-3764.
[n] Y. Watanabe, T. Adachi, S. Igarashi, H. Someya, and N. Tani, “Rapid-cycling Power Supplies for the J-PARC RCS Sextupole Magnets”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO003, pp. 3338-3340.
[n] C.-J. Jing et al., “High Frequency High Power RF Generation using a Relativistic Electron Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC074, pp. 3458-3460.
[n] Y. Han, L. Ma, A. Latina, and D. Schulte, “BBA and Coupling Correction at CLIC RTML”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 442-444. doi:10.18429/JACoW-IPAC2015-MOPJE060
[n] A. Stella, A. Ghigo, V. L. Lollo, F. Marcellini, and M. Serio, “Stripline BPM with Integral In-Vacuo Termination”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR023, pp. 828-830.
[n] H. Junkes, W. Sch?Âllkopf, M. Wesemann, and R. Lange, “Design and Implementation Aspects of the Control System at FHI FEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC096, pp. 324-327.
[n] C. Compton et al., “The Facility for Rare Isotope Beams Superconducting Cavity Production Status and Findings Concerning Surface Defects”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 31-35. doi:10.18429/JACoW-SRF2019-MOP005
[n] J. Plouin et al., “Main Choices and Preliminary Design for the IFMIF RF Couplers”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO033, pp. 634-637.
[n] C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1014-1018. doi:10.18429/JACoW-IPAC2016-TUYA01
[n] B. D. Muratori, J. K. Jones, M. J. de Loos, and S. B. van der Geer, “Multipole Fringe Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC085, pp. 2211-2213.
[n] A. Mereghetti, V. Boccone, F. Cerutti, R. Versaci, and V. Vlachoudis, “The FLUKA LineBuilder and Element DataBase: Tools for Building Complex Models of Accelerator Beam Lines”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD071, pp. 2687-2689.
[n] K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “FLASH: First Soft X-ray FEL Operating Two Undulator Beamlines Simultaneously”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB05, pp. 635-639.
[n] J. He and J. H. Yue, “Bunch Purity Measurement and Improvement”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper TUPP01, unpublished.
[n] S. K. Tian, Y. Jiao, J. Q. Wang, and G. Xu, “Intrabeam Scattering Studies for Low Emittance of BAPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB102, pp. 1123-1125.
[n] M. H. Cho, W. Namkung, J. S. Oh, and S. S. Park, “High-Power Microwave System for PLS 2-GeV Linac (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-23, pp. 418-420.
[n] O. Kamigaito et al., “Progress Towards High-Intensity Heavy-Ion Beams at RIKEN RIBF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI025, pp. 333-335.
[n] Y. L. Zhao, S. Fu, and Z. Li, “The Implementation of Equipartitioning in the Proton Linac Code PADSC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA020, pp. 1766-1768.
[n] W. Zhang et al., “Research and Development of RHIC Injection Kicker Upgrade with Nano Second FID Pulse Generator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD085, pp. 3716-3718.
[n] H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3159-3161. doi:10.18429/JACoW-IPAC2014-THPRO112
[n] V. E. Scarpine et al., “Fermilab PXIE Beam Diagnostics Development and Testing at the HINS Beam Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR072, pp. 954-956.
[n] Z. Y. Guo et al., “Experiment to Measure the Electron Cloud at BEPC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB003, pp. 676-678.
[n] K. Noda et al., “Recent Progress and Future Plan of Heavy-ion Radiotherapy Facility, HIMAC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2812-2814. doi:10.18429/JACoW-IPAC2014-THOAB01
[n] G. V. Eremeev, R. L. Geng, and A. D. Palczewski, “Probing the Fundamental Limit of Niobium in High Radiofrequency Fields by Dual Mode Excitation in Superconducting Radiofrequency Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO017, pp. 746-749.
[n] C. Serpico et al., “A High Gradient Solution for Increasing the Energy of the FERMI Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2525-2527. doi:10.18429/JACoW-IPAC2018-WEPMF067
[n] D. Pellegrini, A. Latina, and D. Schulte, “PLACET2: A Novel Code for Beam Dynamics in Recirculating Machines”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 465-467. doi:10.18429/JACoW-IPAC2015-MOPJE068
[n] A. D. Kovalenko et al., “Ion Polarization Control in the MPD and SPD Detectors of the NICA Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2031-2033. doi:10.18429/JACoW-IPAC2015-TUPTY017
[n] E. J. Curry, P. Musumeci, B. T. Jacobson, and A. Y. Murokh, “Sub-Picosecond Shot-to-Shot Electron Beam and Laser Timing Using a Photoconductive THz Antenna”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 243-245. doi:10.18429/JACoW-IBIC2015-MOPB081
[n] Y. Li, L. Huang, Z. P. Li, Y. D. Liu, N. Wang, and S. Wang, “Impedance Computation of Main Components in CSNS/RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC012, pp. 3299-3301.
[n] K. Honkavaara, B. Faatz, J. Feldhaus, J. Ro?ƒbach, S. Schreiber, and R. Treusch, “Status of the Free-Electron Laser User Facility FLASH”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOAAU01, pp. XX-XX.
[n] R. C. Murphy, S. M. Gerbick, M. Kedzie, M. P. Kelly, and T. Reid, “A Flexible System for the High Pressure Rinsing of SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO034, pp. 456-458.
[n] P. C. Chiu et al., “Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1088-1090. doi:10.18429/JACoW-IPAC2015-MOPTY064
[n] G. Wang, Y. Hao, V. Litvinenko, and S. D. Webb, “Influence of Electron Beam Parameters on Coherent Electron Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THYB02, pp. 3213-3217.
[n] B. T. Jacobson, T. J. Campese, A. Y. Murokh, A. C. Bartnik, and B. M. Dunham, “Design and Initial Demonstration Results of Laser Wire Scanner for Energy Recovery Linacs”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF11, pp. 525-525.
[n] A. D. Palczewski, F. Marhauser, A. Grassellino, and S. Posen, “Material Qualification of LCLS-II Production Niobium Material Including RF and Flux Expulsion Measurements on Single Cell Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 199-202. doi:10.18429/JACoW-LINAC2016-MOPLR026
[n] H. Souda et al., “Observation of 2-Component Bunched Beam Signal with Laser Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD013, pp. 397-399.
[n] S. M. Gerbick, M. P. Kelly, R. C. Murphy, and T. Reid, “A New Electropolishing System For Low-Beta SC Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper WEIOA03, pp. 576-578.
[n] P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n] A. Noda et al., “Challenge for More Efficient Transverse Laser Cooling for Beam Crystallization”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD012, pp. 394-396.
[n] S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 47-51. doi:10.18429/JACoW-IPAC2016-MOZB01
[n] J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 114-116. doi:10.18429/JACoW-ICALEPCS2015-MOPGF015
[n] D. Gonnella et al., “Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1199-1205. doi:10.18429/JACoW-SRF2019-FRCAA3
[n] C. A. Cooper, B. Bullock, S. C. Joshi, A. D. Palczewski, and K. Saito, “Centrifugal Barrel Polishing (CBP) of SRF Cavities Worldwide”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper WEIOA02, pp. 571-575.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Vogel et al., “Status of the Klystrons for the European XFEL after Commissioning and First User Operation Phase”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 420-422.
- A. Djaloeis and Sudjatmoko, “Activities on the Development and Application of Particle Accelerators in Indonesia”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4A003, pp. 12-16.
- K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2162-2164.
- G. W. Dodson, “Challenges in the User Facility Reliability Landscape”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLS02, pp. XX-XX.
- R. T. P. D, S. Jolly, J. K. Jones, B. D. Muratori, and S. B. van der Geer, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC079, pp. 319-321.
- L. Lari et al., “Evaluation of the Combined Betatron and Momentum Cleaning in Point 3 in Terms of Cleaning Efficiency and Energy Deposition for the LHC Collimation Upgrade”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ032, pp. 3762-3764.
- Y. Watanabe, T. Adachi, S. Igarashi, H. Someya, and N. Tani, “Rapid-cycling Power Supplies for the J-PARC RCS Sextupole Magnets”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO003, pp. 3338-3340.
- C.-J. Jing et al., “High Frequency High Power RF Generation using a Relativistic Electron Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC074, pp. 3458-3460.
- Y. Han, L. Ma, A. Latina, and D. Schulte, “BBA and Coupling Correction at CLIC RTML”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 442-444.
- A. Stella, A. Ghigo, V. L. Lollo, F. Marcellini, and M. Serio, “Stripline BPM with Integral In-Vacuo Termination”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR023, pp. 828-830.
- H. Junkes, W. Sch?Âllkopf, M. Wesemann, and R. Lange, “Design and Implementation Aspects of the Control System at FHI FEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC096, pp. 324-327.
- C. Compton et al., “The Facility for Rare Isotope Beams Superconducting Cavity Production Status and Findings Concerning Surface Defects”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 31-35.
- J. Plouin et al., “Main Choices and Preliminary Design for the IFMIF RF Couplers”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO033, pp. 634-637.
- C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1014-1018.
- B. D. Muratori, J. K. Jones, M. J. de Loos, and S. B. van der Geer, “Multipole Fringe Fields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC085, pp. 2211-2213.
- A. Mereghetti, V. Boccone, F. Cerutti, R. Versaci, and V. Vlachoudis, “The FLUKA LineBuilder and Element DataBase: Tools for Building Complex Models of Accelerator Beam Lines”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD071, pp. 2687-2689.
- K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “FLASH: First Soft X-ray FEL Operating Two Undulator Beamlines Simultaneously”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB05, pp. 635-639.
- J. He and J. H. Yue, “Bunch Purity Measurement and Improvement”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper TUPP01, unpublished.
- S. K. Tian, Y. Jiao, J. Q. Wang, and G. Xu, “Intrabeam Scattering Studies for Low Emittance of BAPS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUODB102, pp. 1123-1125.
- M. H. Cho, W. Namkung, J. S. Oh, and S. S. Park, “High-Power Microwave System for PLS 2-GeV Linac (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-23, pp. 418-420.
- O. Kamigaito et al., “Progress Towards High-Intensity Heavy-Ion Beams at RIKEN RIBF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI025, pp. 333-335.
- Y. L. Zhao, S. Fu, and Z. Li, “The Implementation of Equipartitioning in the Proton Linac Code PADSC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA020, pp. 1766-1768.
- W. Zhang et al., “Research and Development of RHIC Injection Kicker Upgrade with Nano Second FID Pulse Generator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD085, pp. 3716-3718.
- H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3159-3161.
- V. E. Scarpine et al., “Fermilab PXIE Beam Diagnostics Development and Testing at the HINS Beam Facility”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR072, pp. 954-956.
- Z. Y. Guo et al., “Experiment to Measure the Electron Cloud at BEPC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAB003, pp. 676-678.
- K. Noda et al., “Recent Progress and Future Plan of Heavy-ion Radiotherapy Facility, HIMAC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2812-2814.
- G. V. Eremeev, R. L. Geng, and A. D. Palczewski, “Probing the Fundamental Limit of Niobium in High Radiofrequency Fields by Dual Mode Excitation in Superconducting Radiofrequency Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO017, pp. 746-749.
- C. Serpico et al., “A High Gradient Solution for Increasing the Energy of the FERMI Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2525-2527.
- D. Pellegrini, A. Latina, and D. Schulte, “PLACET2: A Novel Code for Beam Dynamics in Recirculating Machines”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 465-467.
- A. D. Kovalenko et al., “Ion Polarization Control in the MPD and SPD Detectors of the NICA Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2031-2033.
- E. J. Curry, P. Musumeci, B. T. Jacobson, and A. Y. Murokh, “Sub-Picosecond Shot-to-Shot Electron Beam and Laser Timing Using a Photoconductive THz Antenna”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 243-245.
- Y. Li, L. Huang, Z. P. Li, Y. D. Liu, N. Wang, and S. Wang, “Impedance Computation of Main Components in CSNS/RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC012, pp. 3299-3301.
- K. Honkavaara, B. Faatz, J. Feldhaus, J. Ro?ƒbach, S. Schreiber, and R. Treusch, “Status of the Free-Electron Laser User Facility FLASH”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOAAU01, pp. XX-XX.
- R. C. Murphy, S. M. Gerbick, M. Kedzie, M. P. Kelly, and T. Reid, “A Flexible System for the High Pressure Rinsing of SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO034, pp. 456-458.
- P. C. Chiu et al., “Compensation Strategies for Ramping Waveform of TPS Booster Synchrotron Main Power Supplies”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1088-1090.
- G. Wang, Y. Hao, V. Litvinenko, and S. D. Webb, “Influence of Electron Beam Parameters on Coherent Electron Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THYB02, pp. 3213-3217.
- B. T. Jacobson, T. J. Campese, A. Y. Murokh, A. C. Bartnik, and B. M. Dunham, “Design and Initial Demonstration Results of Laser Wire Scanner for Energy Recovery Linacs”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF11, pp. 525-525.
- A. D. Palczewski, F. Marhauser, A. Grassellino, and S. Posen, “Material Qualification of LCLS-II Production Niobium Material Including RF and Flux Expulsion Measurements on Single Cell Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 199-202.
- H. Souda et al., “Observation of 2-Component Bunched Beam Signal with Laser Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD013, pp. 397-399.
- S. M. Gerbick, M. P. Kelly, R. C. Murphy, and T. Reid, “A New Electropolishing System For Low-Beta SC Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper WEIOA03, pp. 576-578.
- P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 547-549.
- A. Noda et al., “Challenge for More Efficient Transverse Laser Cooling for Beam Crystallization”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD012, pp. 394-396.
- S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 47-51.
- J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 114-116.
- D. Gonnella et al., “Industrial Cavity Production: Lessons Learned to Push the Boundaries of Nitrogen-Doping”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1199-1205.
- C. A. Cooper, B. Bullock, S. C. Joshi, A. D. Palczewski, and K. Saito, “Centrifugal Barrel Polishing (CBP) of SRF Cavities Worldwide”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper WEIOA02, pp. 571-575.
Back to search