Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “Nonlinear Behaviour in the Proposed Lattice of the Daresbury Advanced Photon Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 129-132.
[n] N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4859-4862. doi:10.18429/JACoW-IPAC2023-THPL172
[n] V. Zvyagintsev et al., “Nine-cell Elliptical Cavity Development at TRIUMF”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO020, pp. 107-109.
[n] E. Bloom et al., “The Proposed Injection System for an Asymmetric B Factory in the PEP Tunnel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 982-985.
[n] E. Hoyt, M. Hoyt, R. Kirby, C. Perkins, D. Wright, and A. Farvid, “Processing of O.F.E. Copper Beam Chambers for PEP-II High Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP09, pp. 2054-2056.
[n] W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
[n] A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
[n] R. Cassel et al., “SLC Kicker Magnet Limitations”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 996-999.
[n] F. Anton, “Beam Diagnostics at the COSY Injection Beamline”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1341-1344.
[n] R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
[n] J. C. Walker et al., “Mechanical Support and Transport System Used for the Neutrino Horn at Brookhaven National Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1737-1740.
[n] J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1473-1476.
[n] W. B. Sampson, “Superconducting Synchrotron Magnet Development at Brookhaven”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 634-636.
[n] J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
[n] N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
[n] S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1024-1027.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n] S. A. Veitzer, K. R. C. Beckwith, and M. Kundrapu, “RF Plasma-Based Ion Source Modeling on Unstructured Meshes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2637-2639. doi:10.18429/JACoW-IPAC2015-WEPWA059
[n] E. Gray and J. Fraser, “Design and Construction of the Photocathode Electron Gun Cavity”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-14, pp. 338-340.
[n] R. Rimmer et al., “The JLab Ampere-Class Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP46, pp. 567-570.
[n] H. Dowell and G. O, “Coherent Synchrotron Radiation Induced Emittance Growth in a Chicane Buncher”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8V023, pp. 1891-1893.
[n] Y. Leng, D. Gassner, L. Hoff, and R. Witkover, “Data Acquisition for SNS Beam Loss Monitor System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP576, pp. XX-XX.
[n] C. Duncan and G. M. Vanacore, “Exploring time-of-flight energy filtering possibilities for ultrafast electron single-pixel imaging”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4592-4594. doi:10.18429/JACoW-IPAC2023-THPL070
[n] J. Hock, K. A. Brown, J. Glenn, and T. Russo, “The AGS Electrostatic Septum”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB067, pp. 3422-3424.
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] G. Wu et al., “A Prototype of 500MHz Cavity Coating System by ECR Plasma”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP64, pp. 391-391.
[n] E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “Nonlinear Behaviour in the Proposed Lattice of the Daresbury Advanced Photon Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 129-132.
- N. Joshi et al., “Bead-pull analysis of HOM in X-band linearizer linac on CLARA, with update on HOM measurement system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL172, pp. 4859-4862.
- V. Zvyagintsev et al., “Nine-cell Elliptical Cavity Development at TRIUMF”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO020, pp. 107-109.
- E. Bloom et al., “The Proposed Injection System for an Asymmetric B Factory in the PEP Tunnel”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 982-985.
- E. Hoyt, M. Hoyt, R. Kirby, C. Perkins, D. Wright, and A. Farvid, “Processing of O.F.E. Copper Beam Chambers for PEP-II High Energy Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP09, pp. 2054-2056.
- W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1296-1299.
- A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
- R. Cassel et al., “SLC Kicker Magnet Limitations”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 996-999.
- F. Anton, “Beam Diagnostics at the COSY Injection Beamline”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1341-1344.
- R. I. Saban et al., “Coordination of the Commissioning of the LHC Technical Systems”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC118, pp. 340-342.
- J. C. Walker et al., “Mechanical Support and Transport System Used for the Neutrino Horn at Brookhaven National Laboratory”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1737-1740.
- J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1473-1476.
- W. B. Sampson, “Superconducting Synchrotron Magnet Development at Brookhaven”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 634-636.
- J. Y. Tang et al., “SNS Vacuum Instrumentation and Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP062, pp. XX-XX.
- N. Solyak et al., “Development of X-Band Accelerating Structures at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB013, pp. 1210-1212.
- S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1024-1027.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 743-746.
- S. A. Veitzer, K. R. C. Beckwith, and M. Kundrapu, “RF Plasma-Based Ion Source Modeling on Unstructured Meshes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2637-2639.
- E. Gray and J. Fraser, “Design and Construction of the Photocathode Electron Gun Cavity”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-14, pp. 338-340.
- R. Rimmer et al., “The JLab Ampere-Class Cryomodule”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP46, pp. 567-570.
- H. Dowell and G. O, “Coherent Synchrotron Radiation Induced Emittance Growth in a Chicane Buncher”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8V023, pp. 1891-1893.
- Y. Leng, D. Gassner, L. Hoff, and R. Witkover, “Data Acquisition for SNS Beam Loss Monitor System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP576, pp. XX-XX.
- C. Duncan and G. M. Vanacore, “Exploring time-of-flight energy filtering possibilities for ultrafast electron single-pixel imaging”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL070, pp. 4592-4594.
- J. Hock, K. A. Brown, J. Glenn, and T. Russo, “The AGS Electrostatic Septum”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB067, pp. 3422-3424.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- G. Wu et al., “A Prototype of 500MHz Cavity Coating System by ECR Plasma”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP64, pp. 391-391.
- E. F. Daly, D. Bostic, A. Lisin, M. Palrang, C. Perkins, and K. Skarpaas, “Stretchforming Vacuum Chambers for the PEP-II B-Factory High Energy Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP10, pp. 2057-2059.
Back to search