Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
[n] L. Wang, T. L. Houck, and G. A. Westenskow, “Design and Simulation of an Anode Stalk Support Insulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT041, pp. 2663-2665.
[n] Y. Kim, M. H. Cho, I. S. Ko, W. Namkung, J. S. Oh, and D. Son, “Start-To-End Simulations for PAL XFEL Project”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS18, pp. XX-XX.
[n] R. D. Porter, F. Furuta, D. L. Hall, M. Liepe, and J. T. Maniscalco, “Effects of Chemical Treatments on the Surface Roughess and Surface Magnetic Field Ehancement of Niobium-3 Tin Films for Superconducting Radio-Frequency Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 848-850. doi:10.18429/JACoW-SRF2017-THPB043
[n] C. J. Bocchetta, “Operational Experience with ELETTRA”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEX03T, pp. 76-80.
[n] B. W. J. McNeil, M. W. Poole, and G. R. M. Robb, “The Harmonically Coupled 2-Beam FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper WEBOS05, pp. XX-XX.
[n] A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
[n] V. Schlott, “Highlights from DIPAC 2009”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper THIMNB01, pp. 566-571.
[n] P. A. McIntosh et al., “SRF System Operation of the ALICE ERL Facility at Daresbury”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOBAU05, pp. 34-40.
[n] R. Holtzapple, M. Billing, D. Hartill, M. Stedinger, and B. Podobedov, “Streak Camera Measurements of the Longitudinal Distribution of a Single Bunch in CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP9, pp. 2978-2980.
[n] E. Barbero and F. Rodriguez-Mateos, “Hardware Commissioning of the LHC Quality Assurance Follow-up and Storing of the Test Results”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_064.
[n] R. Kersevan and L. Goirand, “Upgrade Plans of the Vacuum System of the ESRF”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN011, pp. 164-166.
[n] X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
[n] P. Ursch??tz et al., “Beam Dynamics and First Operation of the Sub-harmonic Bunching System in the CTF3 Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS101, pp. 795-797.
[n] L. Neri, L. Celona, and S. Gammino, “High Level Control System Code with Automatic Parametric Characterization Capabilities”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1432-1435. doi:10.18429/JACoW-ICALEPCS2017-THPHA035
[n] A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2133-2135. doi:10.18429/JACoW-IPAC2017-TUPVA034
[n] E. Ciapala, P. Collier, and P. Lienard, “Use of Ethernet and TCP/IP Socket Communications Library Routines for Data Acquisition and Control in the LEP RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1490-1493.
[n] D. Janssen, H. Bluem, A. M. M. Todd, and V. Volkov, “Axial RF Power Input in Photocathode Electron Guns”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB011, pp. 743-745.
[n] B. W. J. McNeil, D. J. Dunning, B. Sheehy, and N. Thompson, “The Use of HHG at 4GLS”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOCAU03, pp. 234-241.
[n] K. Furukawa et al., “Beam Property Management at KEK Electron/Positron 7-GeV Injector Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1123-1126. doi:10.18429/JACoW-ICALEPCS2015-THHC2O01
[n] T. Junquera et al., “Studies on Field Emission in RF Cavities using an Optical Detection System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2203-2206.
[n] V. R. Arsov, S. Hunziker, M. G. Kaiser, V. Schlott, and F. Loehl, “Optical Synchronization of the SwissFEL 250 Mev Test Injector Gun Laser With the Optical Master Oscillator”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA21, pp. 243-246.
[n] M. Bickley, D. A. Bryan, and K. S. White, “The Automator : Intelligent Control System Monitoring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP34, pp. 735-737.
[n] P. W. Schmor, “Initial Commissioning of the ISAC RIB Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCL4, pp. 508-512.
[n] J. G. Hwang, S. W. Jang, and E.-S. Kim, “Issues on Beam Dynamics in PLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE008, pp. 4527-4529.
[n] A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1228-1231.
[n] W. Fischer, A. Jain, and S. Tepikian, “Beam-Based Measurements of Persistent Current Decay in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH006, pp. 2854-2856.
[n] A. Brandt, V. Ayvazyan, S. Simrock, W. Cichalewski, and B. Koseda, “General Automation of LLRF Control for Superconducting Accelerators”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA11, pp. 194-198.
[n] M. K. Craddock and J. R. Richardson, “Beam Quality and Expected Energy Resolution from the TRIUMF Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A09, pp. XX-XX.
[n] P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 54-57.
[n] M. Bellaveglia, D. Alesini, A. Gallo, and C. Vicario, “Measurement Devices for the SPARC Synchronization System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD30, pp. 363-365.
[n] M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
[n] N. Simos et al., “Collimator Design for the HEBT Line of the SNS Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE016, pp. 1055-1057.
[n] J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
[n] I. Issinsky, O. Kozlov, V. Mikhailov, P. Rukoyatkin, and B. Vasilishin, “Expected Characteristics of the Nuclotron Beams for Experimental Setups”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P010, pp. 181-183.
[n] Y. Mori, A. Takagi, and K. Koba, “Multi-Beam Acceleration in FFAG Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA010, pp. 588-590.
[n] E. A. Knapp, “Resonantly Coupled Standing Wave Accelerator Structures for Electron and Proton Linac Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 329-338.
[n] Y.-J. Chen, F. Chambers, A. C. Paul, J. A. Watson, and J. Weir, “Eliminating the Spot Dilution due to Kicker Switching in DARHT-II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG033, pp. 2960-2962.
[n] A. Jain, P. Wanderer, and E. Willen, “Field Quality in the Twin Aperture D2 Dipoles for LHC under Asymmetric Excitation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP94, pp. 3173-3175.
[n] J. Gutleber, “HYPERDAQ Where Data Acquisition Meets the Web”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_004.
[n] J. T. Seeman et al., “Status and Future Plans of the PEP-II B-Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH137, pp. 3561-3563.
[n] J. Martinez-Darve, K. Artoos, P. Cruikshank, N. Kos, and C. Rathjen, “Measurement of the Mechanical Behaviour of the LHC Beam Screen During a Quench”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH035, pp. 2162-2164.
[n] S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
[n] J. Chavanne, M. Hahn, R. Kersevan, C. A. Kitegi, C. Penel, and F. Revol, “Construction of a Cryogenic Permanent Magnet Undulator at ESRF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC105, pp. 2243-2245.
[n] J. A. Holmes et al., “The ORBIT Simulation Code: Benchmarking and Applications”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP04, pp. 231-231.
[n] T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
[n] A. Latina et al., “Wakefield Models for Particle Tracking Codes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN068, pp. 3378-3380.
[n] X. Lu et al., “Rapid Radio-Frequency Beam Energy Modulator for Proton Therapy”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 298-300. doi:10.18429/JACoW-NAPAC2019-TUXBA4
[n] K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
[n] Z. P. Li, Y. Li, and J. Peng, “Beam Parameters Measurement and Correction in CSNS Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 576-578. doi:10.18429/JACoW-LINAC2018-TUPO115
[n] S. Sampayan et al., “Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB010, pp. 716-718.
[n] H. Soltner, M. Pabst, and R. Tolle, “Magnetic Field Calculations of the Superconducting Dipole Magnets for the High- Energy Storage Ring at FAIR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN021, pp. 194-196.
[n] L. Lilje, “High Gradients in Superconducting Multi-Cell Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO03, pp. 220-224.
For LaTeX
Use Complete Form
For BibTeX
References
- G. A. Karamysheva et al., “Center Region Design of the Superconducting Cyclotron C400”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB025, pp. 221-223.
- L. Wang, T. L. Houck, and G. A. Westenskow, “Design and Simulation of an Anode Stalk Support Insulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT041, pp. 2663-2665.
- Y. Kim, M. H. Cho, I. S. Ko, W. Namkung, J. S. Oh, and D. Son, “Start-To-End Simulations for PAL XFEL Project”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS18, pp. XX-XX.
- R. D. Porter, F. Furuta, D. L. Hall, M. Liepe, and J. T. Maniscalco, “Effects of Chemical Treatments on the Surface Roughess and Surface Magnetic Field Ehancement of Niobium-3 Tin Films for Superconducting Radio-Frequency Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 848-850.
- C. J. Bocchetta, “Operational Experience with ELETTRA”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEX03T, pp. 76-80.
- B. W. J. McNeil, M. W. Poole, and G. R. M. Robb, “The Harmonically Coupled 2-Beam FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper WEBOS05, pp. XX-XX.
- A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
- V. Schlott, “Highlights from DIPAC 2009”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper THIMNB01, pp. 566-571.
- P. A. McIntosh et al., “SRF System Operation of the ALICE ERL Facility at Daresbury”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOBAU05, pp. 34-40.
- R. Holtzapple, M. Billing, D. Hartill, M. Stedinger, and B. Podobedov, “Streak Camera Measurements of the Longitudinal Distribution of a Single Bunch in CESR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP9, pp. 2978-2980.
- E. Barbero and F. Rodriguez-Mateos, “Hardware Commissioning of the LHC Quality Assurance Follow-up and Storing of the Test Results”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_064.
- R. Kersevan and L. Goirand, “Upgrade Plans of the Vacuum System of the ESRF”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN011, pp. 164-166.
- X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
- P. Ursch??tz et al., “Beam Dynamics and First Operation of the Sub-harmonic Bunching System in the CTF3 Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS101, pp. 795-797.
- L. Neri, L. Celona, and S. Gammino, “High Level Control System Code with Automatic Parametric Characterization Capabilities”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1432-1435.
- A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2133-2135.
- E. Ciapala, P. Collier, and P. Lienard, “Use of Ethernet and TCP/IP Socket Communications Library Routines for Data Acquisition and Control in the LEP RF System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1490-1493.
- D. Janssen, H. Bluem, A. M. M. Todd, and V. Volkov, “Axial RF Power Input in Photocathode Electron Guns”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB011, pp. 743-745.
- B. W. J. McNeil, D. J. Dunning, B. Sheehy, and N. Thompson, “The Use of HHG at 4GLS”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOCAU03, pp. 234-241.
- K. Furukawa et al., “Beam Property Management at KEK Electron/Positron 7-GeV Injector Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1123-1126.
- T. Junquera et al., “Studies on Field Emission in RF Cavities using an Optical Detection System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2203-2206.
- V. R. Arsov, S. Hunziker, M. G. Kaiser, V. Schlott, and F. Loehl, “Optical Synchronization of the SwissFEL 250 Mev Test Injector Gun Laser With the Optical Master Oscillator”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA21, pp. 243-246.
- M. Bickley, D. A. Bryan, and K. S. White, “The Automator : Intelligent Control System Monitoring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP34, pp. 735-737.
- P. W. Schmor, “Initial Commissioning of the ISAC RIB Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCL4, pp. 508-512.
- J. G. Hwang, S. W. Jang, and E.-S. Kim, “Issues on Beam Dynamics in PLS-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE008, pp. 4527-4529.
- A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1228-1231.
- W. Fischer, A. Jain, and S. Tepikian, “Beam-Based Measurements of Persistent Current Decay in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH006, pp. 2854-2856.
- A. Brandt, V. Ayvazyan, S. Simrock, W. Cichalewski, and B. Koseda, “General Automation of LLRF Control for Superconducting Accelerators”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA11, pp. 194-198.
- M. K. Craddock and J. R. Richardson, “Beam Quality and Expected Energy Resolution from the TRIUMF Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A09, pp. XX-XX.
- P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 54-57.
- M. Bellaveglia, D. Alesini, A. Gallo, and C. Vicario, “Measurement Devices for the SPARC Synchronization System”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD30, pp. 363-365.
- M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156.
- N. Simos et al., “Collimator Design for the HEBT Line of the SNS Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE016, pp. 1055-1057.
- J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
- I. Issinsky, O. Kozlov, V. Mikhailov, P. Rukoyatkin, and B. Vasilishin, “Expected Characteristics of the Nuclotron Beams for Experimental Setups”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P010, pp. 181-183.
- Y. Mori, A. Takagi, and K. Koba, “Multi-Beam Acceleration in FFAG Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA010, pp. 588-590.
- E. A. Knapp, “Resonantly Coupled Standing Wave Accelerator Structures for Electron and Proton Linac Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 329-338.
- Y.-J. Chen, F. Chambers, A. C. Paul, J. A. Watson, and J. Weir, “Eliminating the Spot Dilution due to Kicker Switching in DARHT-II”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG033, pp. 2960-2962.
- A. Jain, P. Wanderer, and E. Willen, “Field Quality in the Twin Aperture D2 Dipoles for LHC under Asymmetric Excitation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP94, pp. 3173-3175.
- J. Gutleber, “HYPERDAQ Where Data Acquisition Meets the Web”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O5_004.
- J. T. Seeman et al., “Status and Future Plans of the PEP-II B-Factory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH137, pp. 3561-3563.
- J. Martinez-Darve, K. Artoos, P. Cruikshank, N. Kos, and C. Rathjen, “Measurement of the Mechanical Behaviour of the LHC Beam Screen During a Quench”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH035, pp. 2162-2164.
- S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
- J. Chavanne, M. Hahn, R. Kersevan, C. A. Kitegi, C. Penel, and F. Revol, “Construction of a Cryogenic Permanent Magnet Undulator at ESRF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC105, pp. 2243-2245.
- J. A. Holmes et al., “The ORBIT Simulation Code: Benchmarking and Applications”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP04, pp. 231-231.
- T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
- A. Latina et al., “Wakefield Models for Particle Tracking Codes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN068, pp. 3378-3380.
- X. Lu et al., “Rapid Radio-Frequency Beam Energy Modulator for Proton Therapy”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 298-300.
- K. Ott, “Quadrupole Misalignment Determination at BESSY”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP002L, pp. 890-892.
- Z. P. Li, Y. Li, and J. Peng, “Beam Parameters Measurement and Correction in CSNS Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 576-578.
- S. Sampayan et al., “Development of a Compact Radiography Accelerator Using Dielectric Wall Accelerator Technology”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB010, pp. 716-718.
- H. Soltner, M. Pabst, and R. Tolle, “Magnetic Field Calculations of the Superconducting Dipole Magnets for the High- Energy Storage Ring at FAIR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN021, pp. 194-196.
- L. Lilje, “High Gradients in Superconducting Multi-Cell Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO03, pp. 220-224.
Back to search