Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Ferioli, C. Fischer, J. Koopman, and M. Sillanoli Geneva, “Sensitivity Studies with the SPS Rest Gas Profile Monitor”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM15, pp. XX-XX.
[n] J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
[n] M. G. Tiefenback and K. Brown, “Beam-Based Phase Monitoring and Gradient Calibration of Jefferson Laboratory RF Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P072, pp. 2271-2273.
[n] C. Bieth, “Invited Paper: Critical Features of RF Systems for Large Cyclotrons”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H01, pp. 294-298.
[n] G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
[n] I. Sgura, G. De Cataldo, A. Franco, C. Pastore, and G. Volpe, “A Programmable Logic Controller-Based System for the Recirculation of Liquid C6F14 in the ALICE High Momentum Particle Identification Detector at the Large Hadron Collider”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN019, pp. 745-748.
[n] C. E. Reece, G. Ciovati, A. T. Wu, and X. Zhao, “Study of Etching Pits in a Large-Grain Single Cell Bulk Niobium Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO087, pp. 446-449.
[n] Pascal Balleyguier, “3D Design of the IPHI RFQ Cavity”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE10, pp. 992-994.
[n] B. Dalena and M. Ben Ghali, “A Machine Learning Technique for Dynamic Aperture Computation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4172-4175. doi:10.18429/JACoW-IPAC2021-THPAB201
[n] M. Comunian, L. Bellan, F. Grespan, and A. Pisent, “ESS DTL Beam Dynamics Comparison Between S-Code and T-Code”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 411-413. doi:10.18429/JACoW-LINAC2016-TUPRC002
[n] B. Copy and M. Mettaelae, “Agile Development and Dependency Management for Industrial Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS001, pp. 767-770.
[n] G. Ciovati, P. Kneisel, G. Myneni, and W. A. Lanford, “Effect of Low Temperature Baking on Niobium Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO14, pp. 562-571.
[n] E. Syresin et al., “NICA Synchrotrons and their Cooling Systems”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper S101, pp. 1-5.
[n] V. Palmieri, “Fundamentals of Electrochemistry - The Electrolytic Polishing of Metals: Application to Copper and Niobium”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WET02, pp. 579-587.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Ferioli, C. Fischer, J. Koopman, and M. Sillanoli Geneva, “Sensitivity Studies with the SPS Rest Gas Profile Monitor”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM15, pp. XX-XX.
- J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971.
- M. G. Tiefenback and K. Brown, “Beam-Based Phase Monitoring and Gradient Calibration of Jefferson Laboratory RF Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P072, pp. 2271-2273.
- C. Bieth, “Invited Paper: Critical Features of RF Systems for Large Cyclotrons”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H01, pp. 294-298.
- G. Sterbini, D. Schulte, and E. Adli, “A Comparative Study for the CLIC Drive Beam Decelerator Optics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR035, pp. 1897-1899.
- I. Sgura, G. De Cataldo, A. Franco, C. Pastore, and G. Volpe, “A Programmable Logic Controller-Based System for the Recirculation of Liquid C6F14 in the ALICE High Momentum Particle Identification Detector at the Large Hadron Collider”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN019, pp. 745-748.
- C. E. Reece, G. Ciovati, A. T. Wu, and X. Zhao, “Study of Etching Pits in a Large-Grain Single Cell Bulk Niobium Cavity”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO087, pp. 446-449.
- Pascal Balleyguier, “3D Design of the IPHI RFQ Cavity”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE10, pp. 992-994.
- B. Dalena and M. Ben Ghali, “A Machine Learning Technique for Dynamic Aperture Computation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4172-4175.
- M. Comunian, L. Bellan, F. Grespan, and A. Pisent, “ESS DTL Beam Dynamics Comparison Between S-Code and T-Code”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 411-413.
- B. Copy and M. Mettaelae, “Agile Development and Dependency Management for Industrial Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS001, pp. 767-770.
- G. Ciovati, P. Kneisel, G. Myneni, and W. A. Lanford, “Effect of Low Temperature Baking on Niobium Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WEO14, pp. 562-571.
- E. Syresin et al., “NICA Synchrotrons and their Cooling Systems”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper S101, pp. 1-5.
- V. Palmieri, “Fundamentals of Electrochemistry - The Electrolytic Polishing of Metals: Application to Copper and Niobium”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper WET02, pp. 579-587.
Back to search