Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Rujanakraikarn, P. Koonpong, and S. Tesprasitte, “The Development of Object Detection System for Industrial Linac Project at SLRI”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1408. doi:10.18429/JACoW-ICALEPCS2019-WEPHA132
[n] M. Litos et al., “Experimental progress of PWFA in a laser-ionized plasma source FACET-II”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP034, unpublished.
[n] S. Peggs, “The European Spallation Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper FRYBA01, pp. 3789-3793.
[n] V. Lee et al., “Laser-ionized plasma sources for plasma wakefield accelerators: Alignment technique, tolerance, and applications”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper WEP053, unpublished.
[n] B. D. O, A. Fukasawa, B. Hidding, J. B. Rosenzweig, S. Tochitsky, and D. L. Bruhwiler, “Double Resosnant Plasma Wakefields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ034, pp. 2838-2840.
[n] G. Tranquille, P. Belochitskii, T. Eriksson, S. Maury, and W. Oelert, “ELENA: From the First Ideas to the Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP017, pp. 3764-3766.
[n] P. C. Chiu et al., “TLS Transportline BPM Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR051, pp. 897-899.
[n] Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “LLNL Laser-Compton X-ray Characterization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1885-1888. doi:10.18429/JACoW-IPAC2016-TUPOW052
[n] S. Reiche, “Tolerance Studies for the Hard X-ray Beamline of the SwissFEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC58, pp. 643-646.
[n] S. D. R?ñdel, A. Jankowiak, and A. Meseck, “Investigation of Microbunching-instability in BERLinPro”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1662-1664. doi:10.18429/JACoW-IPAC2014-TUPRI044
[n] S. Peggs, “Technical Design of the ESS Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO074, pp. 3927-3929.
[n] D. Xiang, Z. Huang, and G. V. Stupakov, “Generation of Attosecond X-ray Pulses Beyond the Atomic Unit of Time using Laser Induced Microbunching in Electron Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC80, pp. 196-199.
[n] P. Krejcik et al., “Sub-fs Resolution with the Enhanced Operation of the X-band Transverse Deflecting Cavity using an RF pulse Compression SLED Cavity”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 833-835. doi:10.18429/JACoW-IBIC2016-WEPG77
[n] M. Bopp, H. Fitze, P. Sigg, and L. Stingelin, “Upgrade Concepts of the PSI Accelerator RF Systems for a Projected 3mA Operation”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-21, pp. XX-XX.
[n] K. Akai, “Application of Superconducting Cavities to Factories”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A09, pp. 79-96.
[n] K. Shibata, T. Kageyama, and Y. Suetsugu, “Development of Movable Mask with Reduced-HOM Design for KEKB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE027, pp. 800-802.
[n] S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 614-616. doi:10.18429/JACoW-IPAC2014-MOPRI015
[n] S. Tomassini et al., “Delivery Status of the ELI-NP Gamma Beam System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1635-1637. doi:10.18429/JACoW-IPAC2016-TUPMY041
[n] D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1913-1915. doi:10.18429/JACoW-IPAC2015-TUPMA035
[n] B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1812-1815.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Rujanakraikarn, P. Koonpong, and S. Tesprasitte, “The Development of Object Detection System for Industrial Linac Project at SLRI”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1408.
- M. Litos et al., “Experimental progress of PWFA in a laser-ionized plasma source FACET-II”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP034, unpublished.
- S. Peggs, “The European Spallation Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper FRYBA01, pp. 3789-3793.
- V. Lee et al., “Laser-ionized plasma sources for plasma wakefield accelerators: Alignment technique, tolerance, and applications”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper WEP053, unpublished.
- B. D. O, A. Fukasawa, B. Hidding, J. B. Rosenzweig, S. Tochitsky, and D. L. Bruhwiler, “Double Resosnant Plasma Wakefields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ034, pp. 2838-2840.
- G. Tranquille, P. Belochitskii, T. Eriksson, S. Maury, and W. Oelert, “ELENA: From the First Ideas to the Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP017, pp. 3764-3766.
- P. C. Chiu et al., “TLS Transportline BPM Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR051, pp. 897-899.
- Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “LLNL Laser-Compton X-ray Characterization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1885-1888.
- S. Reiche, “Tolerance Studies for the Hard X-ray Beamline of the SwissFEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC58, pp. 643-646.
- S. D. R?ñdel, A. Jankowiak, and A. Meseck, “Investigation of Microbunching-instability in BERLinPro”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1662-1664.
- S. Peggs, “Technical Design of the ESS Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO074, pp. 3927-3929.
- D. Xiang, Z. Huang, and G. V. Stupakov, “Generation of Attosecond X-ray Pulses Beyond the Atomic Unit of Time using Laser Induced Microbunching in Electron Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC80, pp. 196-199.
- P. Krejcik et al., “Sub-fs Resolution with the Enhanced Operation of the X-band Transverse Deflecting Cavity using an RF pulse Compression SLED Cavity”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 833-835.
- M. Bopp, H. Fitze, P. Sigg, and L. Stingelin, “Upgrade Concepts of the PSI Accelerator RF Systems for a Projected 3mA Operation”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-21, pp. XX-XX.
- K. Akai, “Application of Superconducting Cavities to Factories”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A09, pp. 79-96.
- K. Shibata, T. Kageyama, and Y. Suetsugu, “Development of Movable Mask with Reduced-HOM Design for KEKB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE027, pp. 800-802.
- S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 614-616.
- S. Tomassini et al., “Delivery Status of the ELI-NP Gamma Beam System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1635-1637.
- D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1913-1915.
- B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1812-1815.
Back to search