Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Nakagawa, “New 28 GHz SC-ECRIS for RIKEN RI Beam Factory Project”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-B01, pp. 8-12.
[n] J. Choi et al., “Design of the PAL Test FEL Machine”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH061, pp. 149-151.
[n] S. P. Yun et al., “Solid Targetry for the Isotope Production Facility at the KOMAC 100 MeV Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1384-1386. doi:10.18429/JACoW-IPAC2016-TUPMR055
[n] P. Manini, A. Bonucci, L. Caruso, A. Conte, F. Siviero, and L. Viale, “A Novel Approach in UHV Pumping of Accelerators: the NEXTorr® Pump”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS010, pp. 1536-1538.
[n] T. Uchida et al., “The Bio-Nano-ECRIS Project: A New ECR Ion Source at Toyo University to Produce Endohedral Fullerenes”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-C01, pp. 27-31.
[n] H. W. Zhao and L. T. Sun, “Recent Results and Operation at 18 GHz with SECRAL”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-A01, pp. XX-XX.
[n] A. H. C. Mukai et al., “Status of the Development of the Experiment Data Acquisition Pipeline for the European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 835-839. doi:10.18429/JACoW-ICALEPCS2017-TUPHA177
[n] A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
[n] L. T. Sun, “The High Charge State All-Permanent Magnet ECRIS Operated on 320 kV HV Platform”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-B05, pp. 23-26.
[n] H.-J. Kwon et al., “Preliminary Design on the Cryomodule of the HWR for the Secondary Particle Generation at KOMAC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 301-303. doi:10.18429/JACoW-SRF2017-MOPB102
[n] D. E. Huttar and P. R. Cheeseman, “A Rapid Cycling Flat-Topped Synchrotron Magnet System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 839-845.
[n] J. H. Kim, Y.-S. Cho, H.-J. Kwon, and Y. G. Song, “Implementation of Data Acquisition System for Operating Condition in the 100 Mev Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4110-4112. doi:10.18429/JACoW-IPAC2016-THPOY012
[n] W. E. Fox and N. K. Bultman, “Transition Fittings Between Aluminium and Stainless Steel Components of Cryogenic Accelerators”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-42, pp. 725-727.
[n] G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
[n] P. Manini, A. Bonucci, A. Conte, and S. Raimondi, “Deposition of Non Evaporable Getter (NEG) Films on Vacuum Chambers for High Energy Machines and Synchrotron Radiation Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH178, pp. 1435-1437.
[n] E. Merle et al., “Transport of the 1.92 - 3.1 kA AIRIX Electron Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH105, pp. 3481-3483.
[n] S. H. Moon, D.-H. Kim, S. Lee, S.-P. Yun, H.-S. Kim, and H.-J. Kwon, “Design and implementation of Allison scanner at the KOMAC LEBT”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 403-406. doi:10.18429/JACoW-IBIC2025-TUPCO20
[n] A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
[n] Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2389-2391. doi:10.18429/JACoW-IPAC2016-WEPMR050
[n] D. H. Seo, Y.-S. Cho, H. S. Kim, H.-J. Kwon, K. T. Seol, and Y. G. Song, “Resonant Frequency Control with RCCS for the KOMAC Proton Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 435-437. doi:10.18429/JACoW-IPAC2016-MOPMW019
[n] A. Conte, A. Bonucci, P. Manini, and S. Raimondi, “NEG Coating of Pipes for RHIC : An Example of Industrialization Process”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN027, pp. 212-214.
[n] A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
[n] D. Thouroude, “Filling of the Phase Space in the Central Region of a Synchrocyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 226-232.
[n] J. L. Weil and I. J. Taylor, “A Source of He Ions for a Van de Graaff Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 257-262.
[n] G. C. Harper and D. W. Storm, “A Beat Frequency Buncher”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A29, pp. 261-264.
[n] R. W. Freyman, “A 40-Kilovolt, 125-Ampere Hard Tube Modulator for Accelerator Service”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 205-208.
[n] J. W. Osterlund and R. Smythe, “A Cyclotron Power-Amplifier RF System Using a 4 CW 50,000C/8350 Tetrode”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 174-180.
[n] D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Nakagawa, “New 28 GHz SC-ECRIS for RIKEN RI Beam Factory Project”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-B01, pp. 8-12.
- J. Choi et al., “Design of the PAL Test FEL Machine”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH061, pp. 149-151.
- S. P. Yun et al., “Solid Targetry for the Isotope Production Facility at the KOMAC 100 MeV Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1384-1386.
- P. Manini, A. Bonucci, L. Caruso, A. Conte, F. Siviero, and L. Viale, “A Novel Approach in UHV Pumping of Accelerators: the NEXTorr® Pump”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS010, pp. 1536-1538.
- T. Uchida et al., “The Bio-Nano-ECRIS Project: A New ECR Ion Source at Toyo University to Produce Endohedral Fullerenes”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-C01, pp. 27-31.
- H. W. Zhao and L. T. Sun, “Recent Results and Operation at 18 GHz with SECRAL”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-A01, pp. XX-XX.
- A. H. C. Mukai et al., “Status of the Development of the Experiment Data Acquisition Pipeline for the European Spallation Source”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 835-839.
- A. Pepato et al., “Construction of the Modules of the IFMIF-EVEDA RFQ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP087, pp. 257-260.
- L. T. Sun, “The High Charge State All-Permanent Magnet ECRIS Operated on 320 kV HV Platform”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-B05, pp. 23-26.
- H.-J. Kwon et al., “Preliminary Design on the Cryomodule of the HWR for the Secondary Particle Generation at KOMAC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 301-303.
- D. E. Huttar and P. R. Cheeseman, “A Rapid Cycling Flat-Topped Synchrotron Magnet System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 839-845.
- J. H. Kim, Y.-S. Cho, H.-J. Kwon, and Y. G. Song, “Implementation of Data Acquisition System for Operating Condition in the 100 Mev Proton Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4110-4112.
- W. E. Fox and N. K. Bultman, “Transition Fittings Between Aluminium and Stainless Steel Components of Cryogenic Accelerators”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-42, pp. 725-727.
- G. Bassato, R. Ponchia, and I. Ben-Zvi, “A Microprocessor Based Controller for Superconducting Resonators”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G04, pp. XX-XX.
- P. Manini, A. Bonucci, A. Conte, and S. Raimondi, “Deposition of Non Evaporable Getter (NEG) Films on Vacuum Chambers for High Energy Machines and Synchrotron Radiation Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH178, pp. 1435-1437.
- E. Merle et al., “Transport of the 1.92 - 3.1 kA AIRIX Electron Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH105, pp. 3481-3483.
- S. H. Moon, D.-H. Kim, S. Lee, S.-P. Yun, H.-S. Kim, and H.-J. Kwon, “Design and implementation of Allison scanner at the KOMAC LEBT”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 403-406.
- A. Bonucci, A. Conte, P. Manini, and S. Raimondi, “Measurement of the Sorption Characteristics of NEG Coated Pipes: The Transmission Factor Method”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH177, pp. 1432-1434.
- Y. G. Song, J. H. Kim, Y.-S. Cho, and H.-J. Kwon, “Development of Web-based User Interface for Beam Status Monitoring of 100-MeV Proton Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2389-2391.
- D. H. Seo, Y.-S. Cho, H. S. Kim, H.-J. Kwon, K. T. Seol, and Y. G. Song, “Resonant Frequency Control with RCCS for the KOMAC Proton Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 435-437.
- A. Conte, A. Bonucci, P. Manini, and S. Raimondi, “NEG Coating of Pipes for RHIC : An Example of Industrialization Process”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN027, pp. 212-214.
- A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
- D. Thouroude, “Filling of the Phase Space in the Central Region of a Synchrocyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 226-232.
- J. L. Weil and I. J. Taylor, “A Source of He Ions for a Van de Graaff Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 257-262.
- G. C. Harper and D. W. Storm, “A Beat Frequency Buncher”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A29, pp. 261-264.
- R. W. Freyman, “A 40-Kilovolt, 125-Ampere Hard Tube Modulator for Accelerator Service”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 205-208.
- J. W. Osterlund and R. Smythe, “A Cyclotron Power-Amplifier RF System Using a 4 CW 50,000C/8350 Tetrode”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 174-180.
- D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
Back to search