Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. B. Oganesyan, “The Influence of the Magnetic Field Inhomogeneity on the Spontaneous Radiation and the Gain in the Plane Wiggler”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO59, pp. 97-100.
[n] Y. Takasu, H. Matsumoto, and T. Shintake, “Development of a High-Performance Capacitive Divider Using Ceramics for Pulsed High-Voltage Monitoring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16041, pp. XX-XX.
[n] C. Madec et al., “CEA Cryomodules Design for SARAF Phase 2”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 70-73. doi:10.18429/JACoW-SRF2017-MOPB011
[n] A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2162-2165.
[n] M. Liepe, D. L. Hartill, G. H. Hoffstaetter, S. Posen, P. Quigley, and V. Veshcherevich, “Experience with the Cornell ERL Injector SRF Cryomodule during High Beam Current Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOODA01, pp. 35-37.
[n] R. Bartolini, R. T. Fielder, and C. A. Thomas, “Loss Factor and Impedance Analysis for the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA052, pp. 1826-1828.
[n] T. Wamsat, N. Baboi, B. Lorbeer, and P. Zhang, “Performance of a Downconverter Test-electronics with MTCA-based Digitizers for Beam Position Monitoring in 3.9 GHz Accelerating Cavities”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA23, pp. 386-389.
[n] R. De Maria, R. Calaga, M. Giovannozzi, Y. Sun, R. Tom?ís, and F. Zimmermann, “High Beta Operation Scenarios for Crab Cavities in the Insertion Region 4 of the CERN Large Hadron Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC037, pp. 540-542.
[n] M. G. Tiefenback, “Experimental Measurement of Emittance Growth in Mismatched Space--Charge-Dominated Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1046-1049.
[n] R. G. Eichhorn, P. Quigley, V. D. Shemelin, M. Carty, J. Matteson, and A. Rae, “Basic Research on RF Absorbing Ceramics for Beam Line HOM Absorbers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4040-4042. doi:10.18429/JACoW-IPAC2014-THPRI112
[n] O. Gonzalez et al., “Electromagnetic Simulations of the Input Power Couplers for the ESS-Bilbao RFQ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC043, pp. 172-174.
[n] J. A. Nolen et al., “Status of the Electrostatic Deflectors of the MSU K500 Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N02, pp. 571-574.
[n] D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 968-972. doi:10.18429/JACoW-SRF2019-THP048
[n] G. I. Batskikh, V. M. Pirozhenko, A. J. Favale, and T. J. Myers, “Development of HILBILAC for Initial Part of ADTT Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B010, pp. 950-952.
[n] G. Mazzitelli, B. Buonomo, L. Quintieri, and P. Valente, “The DAFNE Beam Test Facility: from 1 to 10 Milliards of Particles”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS121, pp. 846-848.
[n] P. Hodgson, C. N. Booth, and P. J. Smith, “MICE Target Operation and Monitoring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE062, pp. 3485-3487.
[n] D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1913-1915. doi:10.18429/JACoW-IPAC2015-TUPMA035
[n] R. Eichhorn et al., “The CW Linac Cryo-module for Cornell's ERL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO060, pp. 2444-2446.
[n] K. Watanabe, H. Hayano, E. Kako, S. Noguchi, and T. Shishido, “Higher Order Mode Study of Superconducting Cavity for ILC Baseline”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS083, pp. 747-749.
[n] A. Kaftoosian and P. J. Gonzalez, “2 kW Balanced Amplifier Module for a 30 kW Solid-State Pulsed RF Power Amplifier at 352 MHz”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2279-2281. doi:10.18429/JACoW-IPAC2014-WEPME011
[n] D. C. Faircloth, S. R. Lawrie, A. P. Letchford, M. E. Westall, M. Whitehead, and T. Wood, “Multi-beamlet Study of Beam Transport in the ISIS H- Ion Source Analysing Magnet”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC143, pp. 409-411.
[n] A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
[n] R. G. Eichhorn, J. A. Robbins, and V. Veshcherevich, “Thermal and Mechanical Analysis of a Waveguide to Coax Symmetric Coupler for Superconducting Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3434-3436. doi:10.18429/JACoW-IPAC2015-WEPTY067
[n] P. J. Smith et al., “The MICE Target”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP282, pp. 1355-1357.
[n] M. C. Wilson, K. A. R. Baker, E. V. Buckley, M. T. Heron, and J. R. Alexander, “Diamond Personnel Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP515, pp. XX-XX.
[n] R. G. Eichhorn and J. May-Mann, “Asymmetric Thermo-currents Diminishing SRF Cavity Performance”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3437-3439. doi:10.18429/JACoW-IPAC2015-WEPTY068
[n] P. Murcek et al., “Modified 3+1/2 Cell SC Cavity Made of Large Grain Niobium for the FZD SRF Photoinjector”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO022, pp. 585-588.
[n] S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 614-616. doi:10.18429/JACoW-IPAC2014-MOPRI015
[n] Th. Stammbach, “The 2mA PSI Beam and Future Applications”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-2, pp. XX-XX.
[n] M. Jarosz, A. Jansson, J. C. Kazantzidis, T. J. Shea, and L. Tchelidze, “ESS Cold LINAC BLM Locations Determination”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1039-1041. doi:10.18429/JACoW-IPAC2015-MOPTY047
[n] H. Hassanzadegan et al., “Design, Implementation and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3638-3640. doi:10.18429/JACoW-IPAC2014-THPME160
[n] N. Templeton et al., “Design of the Thermal and Magnetic Shielding for the LHC High Luminosity Crab-Cavity Upgrade”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB101, pp. 852-856.
[n] P. Raimondi, A. Seryi, and P. Tenenbaum, “Tunability of the NLC Final Focus System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH067, pp. 3831-3833.
[n] G. H. I. Maury Cuna, G. Dugan, D. Sagan, and F. Zimmermann, “Synchrotron-Radiation Photon Distribution for Highest Energy Circular Colliders”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI005, pp. 1340-1342.
[n] G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 138-141.
[n] R. G. Eichhorn, F. Furuta, and G. M. Ge, “T-Maps Taken During Cool-down of an SRF cavity: a Tool to Understand Flux Trapping”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3431-3433. doi:10.18429/JACoW-IPAC2015-WEPTY066
[n] D. J. Scott, S. P. Jamison, P. J. Phillips, and I. R. R. Shinton, “Measurements of the Complex Conductivity of Vacuum Vessels at THz Frequencies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP092, pp. 4752-4754.
[n] J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Measurement of Field Inaccuracy and Shim Simulation of a 130-Pole Superconducting Undolator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB021, pp. 322-324.
[n] P. Raimondi, A. Seryi, and R. Brinkmann, “Halo Reduction by Means of Non Linear Optical Elements in the NLC Final Focus System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH066, pp. 3828-3830.
[n] P. Hodgson, C. N. Booth, P. J. Smith, and J. S. Tarrant, “MICE Target Hardware”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE063, pp. 3488-3490.
[n] Y. Torun, “Using Cerenkov Light to Detect Field Emission in Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP028, pp. 2052-2054.
[n] T. Schietinger, “Update on the Commissioning Effort at the SwissFEL Injector Test Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB013, pp. 504-506.
[n] M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
[n] D. J. Kelliher, S. Machida, and G. H. Rees, “High-power Scaling FFAG Ring Studies”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP256, pp. 202-205.
[n] K. S. B. Li and G. Rumolo, “A Generic Data Model for HeadTail: Design and Implementation with Examples”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC075, pp. 307-309.
[n] G. Guillermo Cant??n, F. Zimmermann, G. H. I. Maury Cuna, and E. D. Ocampo, “Electron Cloud Build Up for LHC Sawtooth Vacuum Chamber”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 744-746. doi:10.18429/JACoW-IPAC2018-TUPAF030
[n] A. J. Dobbs, J. Pasternak, D. J. Adams, E. Overton, and P. J. Smith, “The Mice Muon Beamline and Host Accelerator Beam Bump”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD001, pp. 1404-1406.
[n] G. Iadarola et al., “Electron Cloud and Scrubbing Studies for the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI002, pp. 1331-1333.
[n] S. R. Lawrie et al., “Modifications to the Analysing Magnet in the ISIS Penning Ion Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC150, pp. 427-429.
[n] N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
[n] T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Uniform Fill Patterns in a 100 MHz RF System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2914-2917. doi:10.18429/JACoW-IPAC2016-WEPOW036
[n] R. M. Jones, I. R. R. Shinton, and B. Szczesny, “Third Harmonic Cavity Modal Analysis”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO025, pp. 599-603.
[n] R. G. Eichhorn et al., “Cornell's Main Linac Cryomodule for the Energy Recovery Linac Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2624-2626. doi:10.18429/JACoW-IPAC2014-WEPRI061
[n] D. E. Kim et al., “Development of PAL-XFEL Undulator System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4044-4046. doi:10.18429/JACoW-IPAC2016-THPOW045
[n] N. R. A. Valles and M. Liepe, “Temperature Dependence of the Superheating Field: DC and RF Critical Fields”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB015, pp. 2197-2199.
For LaTeX
Use Complete Form
For BibTeX
References
- K. B. Oganesyan, “The Influence of the Magnetic Field Inhomogeneity on the Spontaneous Radiation and the Gain in the Plane Wiggler”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO59, pp. 97-100.
- Y. Takasu, H. Matsumoto, and T. Shintake, “Development of a High-Performance Capacitive Divider Using Ceramics for Pulsed High-Voltage Monitoring”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16041, pp. XX-XX.
- C. Madec et al., “CEA Cryomodules Design for SARAF Phase 2”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 70-73.
- A. P. Sabersky, “Optical Beam Diagnostics on PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2162-2165.
- M. Liepe, D. L. Hartill, G. H. Hoffstaetter, S. Posen, P. Quigley, and V. Veshcherevich, “Experience with the Cornell ERL Injector SRF Cryomodule during High Beam Current Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOODA01, pp. 35-37.
- R. Bartolini, R. T. Fielder, and C. A. Thomas, “Loss Factor and Impedance Analysis for the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA052, pp. 1826-1828.
- T. Wamsat, N. Baboi, B. Lorbeer, and P. Zhang, “Performance of a Downconverter Test-electronics with MTCA-based Digitizers for Beam Position Monitoring in 3.9 GHz Accelerating Cavities”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA23, pp. 386-389.
- R. De Maria, R. Calaga, M. Giovannozzi, Y. Sun, R. Tom?ís, and F. Zimmermann, “High Beta Operation Scenarios for Crab Cavities in the Insertion Region 4 of the CERN Large Hadron Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC037, pp. 540-542.
- M. G. Tiefenback, “Experimental Measurement of Emittance Growth in Mismatched Space--Charge-Dominated Beams”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1046-1049.
- R. G. Eichhorn, P. Quigley, V. D. Shemelin, M. Carty, J. Matteson, and A. Rae, “Basic Research on RF Absorbing Ceramics for Beam Line HOM Absorbers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 4040-4042.
- O. Gonzalez et al., “Electromagnetic Simulations of the Input Power Couplers for the ESS-Bilbao RFQ”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC043, pp. 172-174.
- J. A. Nolen et al., “Status of the Electrostatic Deflectors of the MSU K500 Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N02, pp. 571-574.
- D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 968-972.
- G. I. Batskikh, V. M. Pirozhenko, A. J. Favale, and T. J. Myers, “Development of HILBILAC for Initial Part of ADTT Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B010, pp. 950-952.
- G. Mazzitelli, B. Buonomo, L. Quintieri, and P. Valente, “The DAFNE Beam Test Facility: from 1 to 10 Milliards of Particles”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS121, pp. 846-848.
- P. Hodgson, C. N. Booth, and P. J. Smith, “MICE Target Operation and Monitoring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE062, pp. 3485-3487.
- D. Douglas et al., “Control of Synchrotron Radiation Effects during Recirculation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1913-1915.
- R. Eichhorn et al., “The CW Linac Cryo-module for Cornell's ERL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO060, pp. 2444-2446.
- K. Watanabe, H. Hayano, E. Kako, S. Noguchi, and T. Shishido, “Higher Order Mode Study of Superconducting Cavity for ILC Baseline”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS083, pp. 747-749.
- A. Kaftoosian and P. J. Gonzalez, “2 kW Balanced Amplifier Module for a 30 kW Solid-State Pulsed RF Power Amplifier at 352 MHz”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2279-2281.
- D. C. Faircloth, S. R. Lawrie, A. P. Letchford, M. E. Westall, M. Whitehead, and T. Wood, “Multi-beamlet Study of Beam Transport in the ISIS H- Ion Source Analysing Magnet”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC143, pp. 409-411.
- A. I. Dzergach, V. S. Kabanov, A. M. Sessler, and J. S. Wurtele, “About the Realization of Laser Acceleration Schemes based on Plasmoids in RF Wells”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP46C, pp. 821-823.
- R. G. Eichhorn, J. A. Robbins, and V. Veshcherevich, “Thermal and Mechanical Analysis of a Waveguide to Coax Symmetric Coupler for Superconducting Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3434-3436.
- P. J. Smith et al., “The MICE Target”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP282, pp. 1355-1357.
- M. C. Wilson, K. A. R. Baker, E. V. Buckley, M. T. Heron, and J. R. Alexander, “Diamond Personnel Safety System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP515, pp. XX-XX.
- R. G. Eichhorn and J. May-Mann, “Asymmetric Thermo-currents Diminishing SRF Cavity Performance”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3437-3439.
- P. Murcek et al., “Modified 3+1/2 Cell SC Cavity Made of Large Grain Niobium for the FZD SRF Photoinjector”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO022, pp. 585-588.
- S. R. Lawrie, D. C. Faircloth, A. P. Letchford, M. Perkins, M. Whitehead, and T. Wood, “Installing the VESPA H- Ion Source Test Stand at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 614-616.
- Th. Stammbach, “The 2mA PSI Beam and Future Applications”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-2, pp. XX-XX.
- M. Jarosz, A. Jansson, J. C. Kazantzidis, T. J. Shea, and L. Tchelidze, “ESS Cold LINAC BLM Locations Determination”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1039-1041.
- H. Hassanzadegan et al., “Design, Implementation and Preliminary Test Results of the ESS Beam Current Monitor System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3638-3640.
- N. Templeton et al., “Design of the Thermal and Magnetic Shielding for the LHC High Luminosity Crab-Cavity Upgrade”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB101, pp. 852-856.
- P. Raimondi, A. Seryi, and P. Tenenbaum, “Tunability of the NLC Final Focus System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH067, pp. 3831-3833.
- G. H. I. Maury Cuna, G. Dugan, D. Sagan, and F. Zimmermann, “Synchrotron-Radiation Photon Distribution for Highest Energy Circular Colliders”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI005, pp. 1340-1342.
- G. E. Fischer et al., “Precision Fiducialization of Transport Components”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 138-141.
- R. G. Eichhorn, F. Furuta, and G. M. Ge, “T-Maps Taken During Cool-down of an SRF cavity: a Tool to Understand Flux Trapping”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3431-3433.
- D. J. Scott, S. P. Jamison, P. J. Phillips, and I. R. R. Shinton, “Measurements of the Complex Conductivity of Vacuum Vessels at THz Frequencies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP092, pp. 4752-4754.
- J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Measurement of Field Inaccuracy and Shim Simulation of a 130-Pole Superconducting Undolator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB021, pp. 322-324.
- P. Raimondi, A. Seryi, and R. Brinkmann, “Halo Reduction by Means of Non Linear Optical Elements in the NLC Final Focus System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH066, pp. 3828-3830.
- P. Hodgson, C. N. Booth, P. J. Smith, and J. S. Tarrant, “MICE Target Hardware”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE063, pp. 3488-3490.
- Y. Torun, “Using Cerenkov Light to Detect Field Emission in Superconducting Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP028, pp. 2052-2054.
- T. Schietinger, “Update on the Commissioning Effort at the SwissFEL Injector Test Facility”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB013, pp. 504-506.
- M. W. Poole and E. A. Seddon, “4GLS and the Prototype Energy Recovery Linac Project at Daresbury”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF063, pp. 455-457.
- D. J. Kelliher, S. Machida, and G. H. Rees, “High-power Scaling FFAG Ring Studies”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP256, pp. 202-205.
- K. S. B. Li and G. Rumolo, “A Generic Data Model for HeadTail: Design and Implementation with Examples”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC075, pp. 307-309.
- G. Guillermo Cant??n, F. Zimmermann, G. H. I. Maury Cuna, and E. D. Ocampo, “Electron Cloud Build Up for LHC Sawtooth Vacuum Chamber”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 744-746.
- A. J. Dobbs, J. Pasternak, D. J. Adams, E. Overton, and P. J. Smith, “The Mice Muon Beamline and Host Accelerator Beam Bump”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD001, pp. 1404-1406.
- G. Iadarola et al., “Electron Cloud and Scrubbing Studies for the LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI002, pp. 1331-1333.
- S. R. Lawrie et al., “Modifications to the Analysing Magnet in the ISIS Penning Ion Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC150, pp. 427-429.
- N. I. Balalykin and A. B. Kuznetsov, “About the Amplitude Dependence of the Surface Resistance of Niobium Coated Copper Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B11, pp. 366-373.
- T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Uniform Fill Patterns in a 100 MHz RF System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2914-2917.
- R. M. Jones, I. R. R. Shinton, and B. Szczesny, “Third Harmonic Cavity Modal Analysis”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO025, pp. 599-603.
- R. G. Eichhorn et al., “Cornell's Main Linac Cryomodule for the Energy Recovery Linac Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2624-2626.
- D. E. Kim et al., “Development of PAL-XFEL Undulator System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4044-4046.
- N. R. A. Valles and M. Liepe, “Temperature Dependence of the Superheating Field: DC and RF Critical Fields”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB015, pp. 2197-2199.
Back to search