Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Watanabe et al., “Upgrading to 500 mA of the Stored Beam Current at SORTEC 1-GeV Source Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1515-1518.
[n] C.-X. Tang et al., “An Overview of the Progress on SSMB”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 166-170. doi:10.18429/JACoW-FLS2018-THP2WB02
[n] R. Wanzenberg, M. Bieler, J. Keil, L. Liao, G. K. Sahoo, and M. Schaumann, “PETRA III Operational Performance and Availability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1453-1455. doi:10.18429/JACoW-IPAC2022-TUPOMS021
[n] F. D. Dziuba et al., “A Superconducting 217 MHz Single Spoke Cavity for the Helmholtz Linear Accelerator at GSI”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 200-203. doi:10.18429/JACoW-LINAC2022-MOPOGE21
[n] I. Ben-Zvi et al., “Ampere Average Current Photoinjector and Energy Recovery Linac”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOC04, pp. XX-XX.
[n] M. Basten et al., “Latest Cryogenic Test Results of the Superconducting ?=0.069 CH-cavities for the HELIAC-project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 392-395. doi:10.18429/JACoW-SRF2019-TUP004
[n] S. V. Shchelkunov, M. Babzien, J. L. Hirshfield, M. A. LaPointe, and T. C. Marshall, “Observation of Superposition of Wake Fields Generated by Electron Bunches in a Dielectric-Lined Waveguide”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE063, pp. 3609-3611.
[n] J. Choi, T.-Y. Lee, and J. H. Suh, “BEAM BASED ALIGNMENT AT THE POHANG LIGHT SOURCE”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP012, pp. XX-XX.
[n] T. Stadlbauer et al., “The Beam Chopper Power Converter for MedAustron: Safety by Design and Development”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2741-2743. doi:10.18429/JACoW-IPAC2015-WEPMA002
[n] G. Iadarola et al., “Xsuite: An Integrated Beam Physics Simulation Framework”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 73-80. doi:10.18429/JACoW-HB2023-TUA2I1
[n] G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
[n] Y. Tao et al., “The Cost Optimization Studies of the Superconducting Linac”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB15, pp. 225-227.
[n] X. Liu, R. K. Grant, N. P. Hammond, and R. K. Rawcliffe, “Front End of Dual Imaging and Diffraction Beamline at Diamond Light Source”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 81-83. doi:10.18429/JACoW-MEDSI2018-TUPH24
[n] H. Tian, C. E. Reece, W. Sommer, O. Trofimova, and L. Zhao, “Analysis of the Topographic Transformation of Niobium Surfaces Under Controlled EP Conditions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO081, pp. 422-425.
[n] P. Bertrand et al., “SPIRAL Facility at GANIL: Ion Beam Simulation and Optimisation Method for the CIME Cyclotron Injection System”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-03, pp. 458-461.
[n] M. Miski-Oglu et al., “Preparation for Commissioning with Beam of Advanced Demonstrator" Module with Heavy Ion Beam"”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 114-117. doi:10.18429/JACoW-LINAC2022-MOPOPA19
[n] C. S. Taylor, F. Block, F. Chiari, J. Huguenin, and P. T?¬tu, “CERN - PS 50 MeV Linac Progress Report”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper G-9, pp. 694-705.
[n] Y. Kijima et al., “Performance of Upgraded SORTEC 1-GeV 500-mA SR Source Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1518-1521.
[n] Y. Dabin, R. Barrett, SJ. Jarjayes, and M. Sanchez del Rio, “A New X-Ray Beam for the ESRF Beamlines, Opto-Mechanical Global Survey”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 316-320. doi:10.18429/JACoW-MEDSI2018-THOAMA06
[n] R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
[n] W. C. Sellyey, J. D. Gilpatrick, P. S. Marroquin, and M. E. Gruchalla, “Experience with Photomultiplier Based Beam Loss Monitors (PMBLM) at the Low Energy Demonstration Accelerator (LEDA)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH042, pp. 1315-1317.
[n] A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4495-4498. doi:10.18429/JACoW-IPAC2023-THPL034
[n] J.-M. Fang, T. C. Marshall, J. L. Hirshfield, and M. A. LaPointe, “An Experimental Test of a Microwave Inverse Cerenkov Accelerator (MICA)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH148, pp. 4020-4022.
[n] A. Noda et al., “Characteristics of Lattice and Magnet System of TARN II”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2684-2688.
[n] K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
[n] T. Hellert, C. Steier, and J. Keil, “First results of automated startup and commissioning procedures at the Advanced Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 991-993. doi:10.18429/JACoW-IPAC2023-MOPM010
For LaTeX
Use Complete Form
For BibTeX
References
- M. Watanabe et al., “Upgrading to 500 mA of the Stored Beam Current at SORTEC 1-GeV Source Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1515-1518.
- C.-X. Tang et al., “An Overview of the Progress on SSMB”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 166-170.
- R. Wanzenberg, M. Bieler, J. Keil, L. Liao, G. K. Sahoo, and M. Schaumann, “PETRA III Operational Performance and Availability”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1453-1455.
- F. D. Dziuba et al., “A Superconducting 217 MHz Single Spoke Cavity for the Helmholtz Linear Accelerator at GSI”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 200-203.
- I. Ben-Zvi et al., “Ampere Average Current Photoinjector and Energy Recovery Linac”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOC04, pp. XX-XX.
- M. Basten et al., “Latest Cryogenic Test Results of the Superconducting ?=0.069 CH-cavities for the HELIAC-project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 392-395.
- S. V. Shchelkunov, M. Babzien, J. L. Hirshfield, M. A. LaPointe, and T. C. Marshall, “Observation of Superposition of Wake Fields Generated by Electron Bunches in a Dielectric-Lined Waveguide”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE063, pp. 3609-3611.
- J. Choi, T.-Y. Lee, and J. H. Suh, “BEAM BASED ALIGNMENT AT THE POHANG LIGHT SOURCE”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP012, pp. XX-XX.
- T. Stadlbauer et al., “The Beam Chopper Power Converter for MedAustron: Safety by Design and Development”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2741-2743.
- G. Iadarola et al., “Xsuite: An Integrated Beam Physics Simulation Framework”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA2I1, pp. 73-80.
- G. Kazakevich, M. Popovic, and R. Johnson, “Studies of operation and control of CW magnetrons for HEP and ADS accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR30, unpublished.
- Y. Tao et al., “The Cost Optimization Studies of the Superconducting Linac”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB15, pp. 225-227.
- X. Liu, R. K. Grant, N. P. Hammond, and R. K. Rawcliffe, “Front End of Dual Imaging and Diffraction Beamline at Diamond Light Source”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 81-83.
- H. Tian, C. E. Reece, W. Sommer, O. Trofimova, and L. Zhao, “Analysis of the Topographic Transformation of Niobium Surfaces Under Controlled EP Conditions”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO081, pp. 422-425.
- P. Bertrand et al., “SPIRAL Facility at GANIL: Ion Beam Simulation and Optimisation Method for the CIME Cyclotron Injection System”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-03, pp. 458-461.
- M. Miski-Oglu et al., “Preparation for Commissioning with Beam of Advanced Demonstrator" Module with Heavy Ion Beam"”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 114-117.
- C. S. Taylor, F. Block, F. Chiari, J. Huguenin, and P. T?¬tu, “CERN - PS 50 MeV Linac Progress Report”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper G-9, pp. 694-705.
- Y. Kijima et al., “Performance of Upgraded SORTEC 1-GeV 500-mA SR Source Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1518-1521.
- Y. Dabin, R. Barrett, SJ. Jarjayes, and M. Sanchez del Rio, “A New X-Ray Beam for the ESRF Beamlines, Opto-Mechanical Global Survey”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 316-320.
- R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
- W. C. Sellyey, J. D. Gilpatrick, P. S. Marroquin, and M. E. Gruchalla, “Experience with Photomultiplier Based Beam Loss Monitors (PMBLM) at the Low Energy Demonstration Accelerator (LEDA)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH042, pp. 1315-1317.
- A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL034, pp. 4495-4498.
- J.-M. Fang, T. C. Marshall, J. L. Hirshfield, and M. A. LaPointe, “An Experimental Test of a Microwave Inverse Cerenkov Accelerator (MICA)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH148, pp. 4020-4022.
- A. Noda et al., “Characteristics of Lattice and Magnet System of TARN II”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2684-2688.
- K. Saito et al., “High Gradient Performance by Electropolishing with 1300 MHz Single and Multi-cell Niobium Superconducting Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP033, pp. 288-291.
- T. Hellert, C. Steier, and J. Keil, “First results of automated startup and commissioning procedures at the Advanced Light Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM010, pp. 991-993.
Back to search