Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
[n] T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
[n] D. Lipka and B. Lorbeer, “Pile-Up Effect of Cold Button BPMs in the European XFEL Accelerator”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 453-456. doi:10.18429/JACoW-IBIC2019-WEAO02
[n] M. Alabau et al., “Effect of the Non-Linear Magnetic Fields on the Emittance Growth in the ATF Extraction Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP075, pp. 2670-2672.
[n] S. A. Ahmadiannamin, H. V. Cavanagh, S. R. Lawrie, and A. P. Letchford, “Beam Physics Simulation Studies of 70 Mev ISIS Injector Linac”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 97-101. doi:10.18429/JACoW-HB2023-TUC2C1
[n] Y. H. Chin et al., “Proving High-field Operation of X-Band Structure for Linear Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11018, pp. XX-XX.
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] G. Winkler, Ph. Gayet, D. Güsewell, and Ch. Titcomb, “Cryogenic Operation and On-line Measurement of RF Losses in the SC Cavities of LEP2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP02, pp. 2037-2039.
[n] M. E. Biagini et al., “PSPA, a Web Platform for Simulation of Particle Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3730-3733. doi:10.18429/JACoW-IPAC2017-THPAB019
[n] C. Qian et al., “Status of Hybrid Superconducting Ecr Ion Source Development at Imp”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WEP1PG020, unpublished.
[n] M. Pekeler, S. Bauer, M. Peiniger, P. vomStein, and H. Vogel, “SRF activities at ACCEL instruments”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP52, pp. XX-XX.
[n] R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
[n] I. Pogorelsky, M. N. Polyanskiy, and T. V. Shaftan, “Pulse-Burst CO? Laser for High-Brilliance Compton Light Sources”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3890-3892. doi:10.18429/JACoW-IPAC2021-THPAB061
[n] F. Amman, J. Le Duff, R. Miller, P. L. Morton, A. M. Sessler, and B. Zotter, “DISCUSSION: Beam Dynamics in the Presence of IONS and Electrons”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 849-850.
[n] H. Huang et al., “Overcoming Depolarizing Resonances in the AGS with Two Helical Partial Snakes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI05, pp. 748-750.
[n] D. J. Kelliher et al., “Studies of 10 GeV Decay Ring Design for the International Design Study of the Neutrino Factory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI049, pp. 1457-1459.
[n] H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
[n] D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
[n] A. I. Balabin, G. N. Kropachev, I. O. Parshin, and D. G. Skachkov, “The Effects of Coulomb Beam Interaction in Multiaperture Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3675-3678.
[n] A. Ueno, K. Ikegami, Y. Namekawa, H. Oguri, and K. Ohkoshi, “Status of the J-PARC Negative Hydrogen Ion Source”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP118, pp. 1016-1018.
[n] C. Carter, J. Fopma, G. Gelato, L. Magnani, P. Odier, and K. Schindl, “Adapting the CERN PS Booster to Oxygen Acceleration”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 526-529.
[n] Yu. A. Rogovsky, E. A. Bekhtenev, D. E. Berkaev, A. N. Kyrpotin, and I. Nesterenko, “Beam Measuremet System for VEPP-2000”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP026, pp. 143-145.
[n] X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1888-1890. doi:10.18429/JACoW-IPAC2018-WEPAF032
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB066, pp. 621-623.
[n] H. Euteneuer et al., “Operating Experience with MAMI I”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A202, pp. 22-24.
[n] V. Judin et al., “Observation of Bursting Behavior Using Multiturn Measurements at ANKA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA021, pp. 2526-2528.
[n] Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
[n] Yu. A. Rogovsky and E. A. Bekhtenev, “Pickup Beam Measurement System at the VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD68, pp. 203-205.
[n] C. S. Narug et al., “Design Status of BCC Cryomodule for LCLS-II HE”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 263-266. doi:10.18429/JACoW-SRF2023-MOPMB065
[n] M. Sommer, B. D. Isbarn, B. Riemann, and T. Weis, “Interaction of RF Phase Modulation and Coupled-Bunch Instabilities at the DELTA Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1720-1723. doi:10.18429/JACoW-IPAC2016-TUPOR027
[n] M. Anerella et al., “Superconducting Dipole Magnets for the LHC Insertion Regions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B14, pp. 2187-2192.
[n] M. A. Harrison, R. B. Agustsson, T. J. Campese, P. S. Chang, A. Y. Murokh, and M. Ruelas, “Design for a Fast, XFEL-Quality Wire Scanner”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO27, pp. 276-278.
[n] R. Olsen, J. Murray, and J. Dabrowski, “Control System for NSLS Booster Power Supply Upgrade II”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1858-1861.
[n] T. Fujisawa et al., “Radio Frequency System of the RIKEN Ring Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1096-1099.
[n] W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 663-667. doi:10.18429/JACoW-LINAC2016-WE1A05
[n] P. Kneisel, B. Lewis, and L. Turlington, “Experience with High Pressure Ultrapure Water Rinsing of Niobium Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I09, pp. XX-XX.
[n] G. Dattoli, C. R. Frascati, M. Migliorati, and A. Schiavi, “Coherent Synchrotron Radiation: A Simulation Code Based on the Non-Linear Extension of the Operator Splitting Method”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP014, pp. XX-XX.
[n] V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1155-1161.
[n] Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
[n] S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
[n] G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 372-374. doi:10.18429/JACoW-NAPAC2022-TUPA15
[n] R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1666-1669.
[n] T. Kroc, “A Quadrupole Magnet for the Fermilab Linac Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2378-2381.
[n] C. Christou, V. C. Kempson, and S. J. Singleton, “Enhancements to the Diamond Light Source Pre-Injector Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP030, pp. 459-461.
[n] F. Carra, K. Brodzinski, E. Cano-Pleite, and O. Capatina, “Numerical and Experimental Evaluation of the DQW Crab Cavity Cryomodule Thermal Budget”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1074-1077. doi:10.18429/JACoW-IPAC2019-MOPTS092
[n] W. Lawson et al., “Experimental Gyroklystron Studies for TeV Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-31, pp. 383-385.
[n] P. Pizzol et al., “Progress of MgB2 Deposition Technique for SRF Cavities at LANL”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 482. doi:10.18429/JACoW-SRF2021-TUPTEV003
[n] R. Mu??oz Horta, J. M. G??mez Cordero, and F. Perez, “Implementation of Single Klystron Working Mode at the ALBA Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2276-2278. doi:10.18429/JACoW-IPAC2014-WEPME010
[n] J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3512-3515. doi:10.18429/JACoW-IPAC2024-THPR14
[n] M. Ikegami, Y. Kondo, S. Lee, T. Ohkawa, and A. Ueno, “Commissioning strategies for J-PARC linac and L3BT”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THBZ02, pp. 347-349.
[n] E. S. McCrory, C. W. Schmidt, and A. V. Feschenko, “Use of INR-Style Bunch-Length Detector in the Fermilab Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-21, pp. 662-664.
[n] B. Copy and M. Mettaelae, “Agile Development and Dependency Management for Industrial Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS001, pp. 767-770.
[n] J. R?Ânsch-Schulenburg, K. Honkavaara, M. Kuhlmann, S. Schreiber, R. Treusch, and M. Vogt, “Status of the Superconducting Soft X-Ray Free-Electron Laser User Facility Flash at DESY”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1909-1911. doi:10.18429/JACoW-IPAC2019-TUPRB106
[n] F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
[n] B. Dalena et al., “Dipole Field Quality and Dynamic Aperture for FCC-hh”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 137-140. doi:10.18429/JACoW-IPAC2018-MOPMF024
For LaTeX
Use Complete Form
For BibTeX
References
- P. J. Tallerico, M. L. Crow, A. Guthrie, G. Johnson, and J. Schubert, “The Conventional Facilities Requirements for the SNS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH066, pp. 3377-3379.
- T. Morishita, H. Asano, and M. Ikegami, “Floor Deformation of J-PARC Linac after the Tohoku Earthquake in Japan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS049, pp. 2601-2603.
- D. Lipka and B. Lorbeer, “Pile-Up Effect of Cold Button BPMs in the European XFEL Accelerator”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 453-456.
- M. Alabau et al., “Effect of the Non-Linear Magnetic Fields on the Emittance Growth in the ATF Extraction Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP075, pp. 2670-2672.
- S. A. Ahmadiannamin, H. V. Cavanagh, S. R. Lawrie, and A. P. Letchford, “Beam Physics Simulation Studies of 70 Mev ISIS Injector Linac”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC2C1, pp. 97-101.
- Y. H. Chin et al., “Proving High-field Operation of X-Band Structure for Linear Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11018, pp. XX-XX.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- G. Winkler, Ph. Gayet, D. Güsewell, and Ch. Titcomb, “Cryogenic Operation and On-line Measurement of RF Losses in the SC Cavities of LEP2”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP02, pp. 2037-2039.
- M. E. Biagini et al., “PSPA, a Web Platform for Simulation of Particle Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3730-3733.
- C. Qian et al., “Status of Hybrid Superconducting Ecr Ion Source Development at Imp”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WEP1PG020, unpublished.
- M. Pekeler, S. Bauer, M. Peiniger, P. vomStein, and H. Vogel, “SRF activities at ACCEL instruments”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP52, pp. XX-XX.
- R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
- I. Pogorelsky, M. N. Polyanskiy, and T. V. Shaftan, “Pulse-Burst CO? Laser for High-Brilliance Compton Light Sources”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3890-3892.
- F. Amman, J. Le Duff, R. Miller, P. L. Morton, A. M. Sessler, and B. Zotter, “DISCUSSION: Beam Dynamics in the Presence of IONS and Electrons”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 849-850.
- H. Huang et al., “Overcoming Depolarizing Resonances in the AGS with Two Helical Partial Snakes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI05, pp. 748-750.
- D. J. Kelliher et al., “Studies of 10 GeV Decay Ring Design for the International Design Study of the Neutrino Factory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI049, pp. 1457-1459.
- H. Baba, H. Hirakawa, T. Nishikawa, S. Okumura, J. Tanaka, and Y. Tao, “Model Cavity Studies for Tank Design and on Tank Fabrication”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-10, pp. 543-556.
- D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
- A. I. Balabin, G. N. Kropachev, I. O. Parshin, and D. G. Skachkov, “The Effects of Coulomb Beam Interaction in Multiaperture Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3675-3678.
- A. Ueno, K. Ikegami, Y. Namekawa, H. Oguri, and K. Ohkoshi, “Status of the J-PARC Negative Hydrogen Ion Source”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP118, pp. 1016-1018.
- C. Carter, J. Fopma, G. Gelato, L. Magnani, P. Odier, and K. Schindl, “Adapting the CERN PS Booster to Oxygen Acceleration”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 526-529.
- Yu. A. Rogovsky, E. A. Bekhtenev, D. E. Berkaev, A. N. Kyrpotin, and I. Nesterenko, “Beam Measuremet System for VEPP-2000”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP026, pp. 143-145.
- X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1888-1890.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB066, pp. 621-623.
- H. Euteneuer et al., “Operating Experience with MAMI I”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A202, pp. 22-24.
- V. Judin et al., “Observation of Bursting Behavior Using Multiturn Measurements at ANKA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA021, pp. 2526-2528.
- Y. M. Pischalnikov et al., “A Technique for Monitoring Fast Tuner Piezoactuator Preload Forces for Superconducting RF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN108, pp. 2289-2291.
- Yu. A. Rogovsky and E. A. Bekhtenev, “Pickup Beam Measurement System at the VEPP-2000 Collider”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD68, pp. 203-205.
- C. S. Narug et al., “Design Status of BCC Cryomodule for LCLS-II HE”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB065, pp. 263-266.
- M. Sommer, B. D. Isbarn, B. Riemann, and T. Weis, “Interaction of RF Phase Modulation and Coupled-Bunch Instabilities at the DELTA Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1720-1723.
- M. Anerella et al., “Superconducting Dipole Magnets for the LHC Insertion Regions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B14, pp. 2187-2192.
- M. A. Harrison, R. B. Agustsson, T. J. Campese, P. S. Chang, A. Y. Murokh, and M. Ruelas, “Design for a Fast, XFEL-Quality Wire Scanner”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO27, pp. 276-278.
- R. Olsen, J. Murray, and J. Dabrowski, “Control System for NSLS Booster Power Supply Upgrade II”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1858-1861.
- T. Fujisawa et al., “Radio Frequency System of the RIKEN Ring Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1096-1099.
- W. Venturini Delsolaro et al., “HIE-ISOLDE SC Linac Progress and Commissioning in 2016”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 663-667.
- P. Kneisel, B. Lewis, and L. Turlington, “Experience with High Pressure Ultrapure Water Rinsing of Niobium Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I09, pp. XX-XX.
- G. Dattoli, C. R. Frascati, M. Migliorati, and A. Schiavi, “Coherent Synchrotron Radiation: A Simulation Code Based on the Non-Linear Extension of the Operator Splitting Method”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP014, pp. XX-XX.
- V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1155-1161.
- Z. G. Zong et al., “Research and development of 1.3 GHz low loss cavities made of China large grain at IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP34, pp. XX-XX.
- S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
- G. Gaitan et al., “Development of a CVD System for Next-Generation SRF Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 372-374.
- R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1666-1669.
- T. Kroc, “A Quadrupole Magnet for the Fermilab Linac Upgrade”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2378-2381.
- C. Christou, V. C. Kempson, and S. J. Singleton, “Enhancements to the Diamond Light Source Pre-Injector Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP030, pp. 459-461.
- F. Carra, K. Brodzinski, E. Cano-Pleite, and O. Capatina, “Numerical and Experimental Evaluation of the DQW Crab Cavity Cryomodule Thermal Budget”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1074-1077.
- W. Lawson et al., “Experimental Gyroklystron Studies for TeV Linear Colliders”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-31, pp. 383-385.
- P. Pizzol et al., “Progress of MgB2 Deposition Technique for SRF Cavities at LANL”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 482.
- R. Mu??oz Horta, J. M. G??mez Cordero, and F. Perez, “Implementation of Single Klystron Working Mode at the ALBA Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2276-2278.
- J. Hyun et al., “Importance of quadrupole magnet fringing fields in low energy beam transport: example in the LIPAc 5 MeV D+ beamline”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR14, pp. 3512-3515.
- M. Ikegami, Y. Kondo, S. Lee, T. Ohkawa, and A. Ueno, “Commissioning strategies for J-PARC linac and L3BT”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THBZ02, pp. 347-349.
- E. S. McCrory, C. W. Schmidt, and A. V. Feschenko, “Use of INR-Style Bunch-Length Detector in the Fermilab Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-21, pp. 662-664.
- B. Copy and M. Mettaelae, “Agile Development and Dependency Management for Industrial Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS001, pp. 767-770.
- J. R?Ânsch-Schulenburg, K. Honkavaara, M. Kuhlmann, S. Schreiber, R. Treusch, and M. Vogt, “Status of the Superconducting Soft X-Ray Free-Electron Laser User Facility Flash at DESY”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1909-1911.
- F. Zimmermann, M. Koratzinos, A. P. Blondel, and M. Zanetti, “LEP3: A High Luminosity e+e- Collider in the LHC Tunnel to Study the Higgs Boson”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR078, pp. 2005-2007.
- B. Dalena et al., “Dipole Field Quality and Dynamic Aperture for FCC-hh”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 137-140.
Back to search