Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Young, “Simulations of the LEDA LEBT with H$^+$, H$_2^+$, and $e^-$ Particles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W023, pp. 2749-2751.
[n] H. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, M. Takao, and A. Yokoya, “Design of Variable Polarizing Undulator APPLE-type for SX Beamline in the SPring-8”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP113G, pp. 2579-2584.
[n] P. Bastl et al., “Hardware Architecture of the ELI Beamlines Control and DAQ System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 2000-2006. doi:10.18429/JACoW-ICALEPCS2017-FRAPL05
[n] T. Noakes et al., “Copper photocathodes for the modified 10 Hz gun on the CLARA accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1408-1411. doi:10.18429/JACoW-IPAC2023-TUPA032
[n] S. Jolly, R. T. P. D, A. P. Letchford, and J. K. Pozimski, “Acceptance and Transmission Simulations of the FETS RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA041, pp. 3720-3722.
[n] M. Steck, K. Beckert, P. Beller, B. Franzke, and F. Nolden, “Experimental Progress in Fast Cooling in the ESR”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPC008, pp. 615-619.
[n] K. Harada et al., “Tuning of the Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD027, pp. 3150-3152.
[n] T. Honda, Y. Kobayashi, S. Nagahashi, and R. Takai, “Development and Present Status of Photon Factory Light Sources”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4155-4158. doi:10.18429/JACoW-IPAC2018-THPMF043
[n] H. Dzitko et al., “Technical and Logistical Challenges for IFMIF-LIPAC Cryomodule Construction”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper FRBA01, pp. 1453-1459.
[n] R. K. Bhandari, A. Bandyopadhyay, A. Chakrabarti, and V. Naik, “Rare Ion Beam (RIB) Facility at VECC : Present and Future”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS016, pp. 3454-3456.
[n] K. Harada, Y. Kobayashi, T. Miyajima, and S. Nagahashi, “PF-AR Injection System with Pulsed Quadrupole Magnet”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14001, pp. XX-XX.
[n] H. Takaki et al., “A Pulsed Quadrupole Magnet Injection at the PF-AR Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC092, pp. 2207-2209.
[n] O. Kester, R. Rao, and L. Rinolfi, “Beam Emittance Measurements from CERN Thermionic Guns”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1017-1020.
[n] M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
[n] X. Escaler et al., “Thermo-Fluid Study of the UPC Race-Track Microtron Cooling System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 173-175. doi:10.18429/JACoW-MEDSI2016-TUPE09
[n] D. Kruecker, I. Melzer-Pellmann, F. Poirier, and N. J. Walker, “Simulation Studies on Coupler Wakefield and RF Kicks for the International Linear Collider with MERLIN”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP047, pp. 1649-1651.
[n] C. Wiesner, C. Hernalsteens, M. Solfaroli, J. Wenninger, D. Wollmann, and J. Uythoven, “Machine protection perspective on the restart of the large hadron collider after long shutdown 2”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 618-621. doi:10.18429/JACoW-IPAC2023-MOPL039
[n] Q. Wu, S. A. Belomestnykh, I. Ben-Zvi, and R. Calaga, “HOM Damping and Multipacting Analysis of the Quarter-wave Crab Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR084, pp. 2020-2022.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Young, “Simulations of the LEDA LEBT with H$^+$, H$_2^+$, and $e^-$ Particles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W023, pp. 2749-2751.
- H. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, M. Takao, and A. Yokoya, “Design of Variable Polarizing Undulator APPLE-type for SX Beamline in the SPring-8”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP113G, pp. 2579-2584.
- P. Bastl et al., “Hardware Architecture of the ELI Beamlines Control and DAQ System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 2000-2006.
- T. Noakes et al., “Copper photocathodes for the modified 10 Hz gun on the CLARA accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA032, pp. 1408-1411.
- S. Jolly, R. T. P. D, A. P. Letchford, and J. K. Pozimski, “Acceptance and Transmission Simulations of the FETS RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA041, pp. 3720-3722.
- M. Steck, K. Beckert, P. Beller, B. Franzke, and F. Nolden, “Experimental Progress in Fast Cooling in the ESR”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPC008, pp. 615-619.
- K. Harada et al., “Tuning of the Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD027, pp. 3150-3152.
- T. Honda, Y. Kobayashi, S. Nagahashi, and R. Takai, “Development and Present Status of Photon Factory Light Sources”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4155-4158.
- H. Dzitko et al., “Technical and Logistical Challenges for IFMIF-LIPAC Cryomodule Construction”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper FRBA01, pp. 1453-1459.
- R. K. Bhandari, A. Bandyopadhyay, A. Chakrabarti, and V. Naik, “Rare Ion Beam (RIB) Facility at VECC : Present and Future”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS016, pp. 3454-3456.
- K. Harada, Y. Kobayashi, T. Miyajima, and S. Nagahashi, “PF-AR Injection System with Pulsed Quadrupole Magnet”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14001, pp. XX-XX.
- H. Takaki et al., “A Pulsed Quadrupole Magnet Injection at the PF-AR Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC092, pp. 2207-2209.
- O. Kester, R. Rao, and L. Rinolfi, “Beam Emittance Measurements from CERN Thermionic Guns”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1017-1020.
- M. Masaki, K. Soutome, S. Takano, and M. Takao, “Measurement of Complex Coupling Driving Term of Linear Difference Resonance Using Turn-by-turn Beam Position Monitors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC026, pp. 3035-3037.
- X. Escaler et al., “Thermo-Fluid Study of the UPC Race-Track Microtron Cooling System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 173-175.
- D. Kruecker, I. Melzer-Pellmann, F. Poirier, and N. J. Walker, “Simulation Studies on Coupler Wakefield and RF Kicks for the International Linear Collider with MERLIN”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP047, pp. 1649-1651.
- C. Wiesner, C. Hernalsteens, M. Solfaroli, J. Wenninger, D. Wollmann, and J. Uythoven, “Machine protection perspective on the restart of the large hadron collider after long shutdown 2”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL039, pp. 618-621.
- Q. Wu, S. A. Belomestnykh, I. Ben-Zvi, and R. Calaga, “HOM Damping and Multipacting Analysis of the Quarter-wave Crab Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR084, pp. 2020-2022.
Back to search