Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Seimiya et al., “An Optimization of ILC Positron Source for Electron-Driven Scheme”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2529-2531. doi:10.18429/JACoW-IPAC2015-WEPWA017
[n] W. Zhang et al., “A Monitoring System for CSR Power Supply”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP181, pp. 1169-1171.
[n] W. Zhang et al., “The Power Supply Control System of CSR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 772-774. doi:10.18429/JACoW-ICALEPCS2015-WEPGF034
[n] H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 742-747.
[n] E. Fagotti et al., “Beam Commissioning of the IFMIF EVEDA Very High Power RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2902-2907. doi:10.18429/JACoW-IPAC2018-THXGBF2
[n] W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA130, unpublished.
[n] I. Daito et al., “High Flux Laser-Compton Scattered Gamma-ray Source by Compressed Nd:YAG Laser Pulse.”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR065, pp. 4124-4126.
[n] A. Denker, J. Bundesmann, A. Dittwald, and G. Kourkafas, “Upgrade plans and new target stations for the HZB cyclotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5169-5172. doi:10.18429/JACoW-IPAC2023-THPM129
[n] R. M. Zwaska, B. C. Brown, I. Kourbanis, A. Marchionni, and E. Prebys, “Beam Loss at the Fermilab Booster and Main Injector: Recent Experience and the Road to MW Class Beams”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ02, pp. XX-XX.
[n] K. Watanabe, H. Hayano, E. Kako, S. Noguchi, and T. Shishido, “Higher Order Mode Study of Superconducting Cavity for ILC Baseline”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS083, pp. 747-749.
[n] B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
[n] K. Watanabe, H. Hayano, S. Noguchi, E. Kako, and T. Shishido, “New HOM coupler design for ERL injector at KEK”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP30, pp. XX-XX.
[n] B. E. Karlsen-Bæck, S. Kostoglou, S. Morales Vigo, B. Salvachua, H. Timko, and M. Zampetakis, “Comparison of BCMS and standard beams at LHC injection energy”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM016, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Seimiya et al., “An Optimization of ILC Positron Source for Electron-Driven Scheme”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2529-2531.
- W. Zhang et al., “A Monitoring System for CSR Power Supply”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP181, pp. 1169-1171.
- W. Zhang et al., “The Power Supply Control System of CSR”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 772-774.
- H. Blosser et al., “Medical Accelerator Projects at Michigan State University”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 742-747.
- E. Fagotti et al., “Beam Commissioning of the IFMIF EVEDA Very High Power RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2902-2907.
- W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA130, unpublished.
- I. Daito et al., “High Flux Laser-Compton Scattered Gamma-ray Source by Compressed Nd:YAG Laser Pulse.”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR065, pp. 4124-4126.
- A. Denker, J. Bundesmann, A. Dittwald, and G. Kourkafas, “Upgrade plans and new target stations for the HZB cyclotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM129, pp. 5169-5172.
- R. M. Zwaska, B. C. Brown, I. Kourbanis, A. Marchionni, and E. Prebys, “Beam Loss at the Fermilab Booster and Main Injector: Recent Experience and the Road to MW Class Beams”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAZ02, pp. XX-XX.
- K. Watanabe, H. Hayano, E. Kako, S. Noguchi, and T. Shishido, “Higher Order Mode Study of Superconducting Cavity for ILC Baseline”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS083, pp. 747-749.
- B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
- K. Watanabe, H. Hayano, S. Noguchi, E. Kako, and T. Shishido, “New HOM coupler design for ERL injector at KEK”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP30, pp. XX-XX.
- B. E. Karlsen-Bæck, S. Kostoglou, S. Morales Vigo, B. Salvachua, H. Timko, and M. Zampetakis, “Comparison of BCMS and standard beams at LHC injection energy”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM016, this conference.
Back to search