JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Serrano, I. Acebes, S. Deghaye, W. Heinze, and J. Lewis, “VME Switch for CERN's PS Analog Video System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP534, pp. XX-XX. 
[n]	J. Serrano, P. ?ülvarez, D. Dom?¡nguez, and J. Lewis, “Nanosecond Level UTC Timing Generation and Stamping in CERN's LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP533, pp. XX-XX. 
[n]	S. Marks et al., “Magnetic Performance of the Advanced Light Source EPU5.0 Elliptically Polarizing Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR4, pp. 162-164. 
[n]	M. S. de Jong et al., “A 2856 MHz RF Cavity for the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 832-835. 
[n]	H. Heo et al., “Development of an X-Band Linearizer System for PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 554-556. doi:10.18429/JACoW-IPAC2016-MOPMY026
[n]	W. T. Kitka et al., “Status of the NSRC SOLARIS Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1492-1493. doi:10.18429/JACoW-ICALEPCS2017-THPHA055
[n]	A. Oates, “CLARA Gun Temperature Control Using Omron PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1646-1648. doi:10.18429/JACoW-ICALEPCS2017-THPHA114
[n]	M. Otani, N. Kawamura, T. Mibe, T. Yamazaki, K. Ishida, and G. Marshall, “Simulation of Surface Muon Beamline, Ultra-Slow Muon Production and Extraction for the J-PARC g-2/EDM Experiment”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 970-973. doi:10.18429/JACoW-IPAC2018-TUPAK007
[n]	S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586. 
[n]	M. Woods et al., “A Test Facility for the International Linear Collider at SLAC End Station A for Prototypes of Beam Delivery and IR Components”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP036, pp. 2461-2463. 
[n]	S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n]	W. Ingalls et al., “Status of the H- Injector Development Program at LANSCE”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA17, pp. 1923-1925. 
[n]	P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331. 
[n]	G. T. Danby, J. E. Allinger, and J. W. Jackson, “Economical Cryogenic Pulsed Synchrotrons for Very High Energies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 685-690. 
[n]	O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1604-1607. doi:10.18429/JACoW-IPAC2021-TUPAB098
[n]	Y. Shobuda and S. Machida, “Degradation of the Beam passing through Idle Coupled Cavities”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA035, pp. 369-371. 
[n]	M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3115-3118. doi:10.18429/JACoW-IPAC2018-THPAF062
[n]	L. Bizel-Bizellot, M. Ellis, S. M. Pattalwar, M. D. Pendleton, P. A. Smith, and A. E. Wheelhouse, “Innovative Cryogenic Test Facility for Testing SRF Cavity Series Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 520-523. doi:10.18429/JACoW-SRF2017-TUPB060
[n]	J. W. Staples, J. J. Ayers, D. W. Cheng, J. B. Greer, M. D. Hoff, and A. Ratti, “The SNS Four-Phase LEBT Chopper”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA32, pp. 1961-1963. 
[n]	D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960. 
[n]	D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n]	R. Ostojic et al., “Quench Performance and Field Quality Measurements of the First LHC Low-$eta$ Quadrupole Model”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4C006, pp. 3209-3211. 
[n]	J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305. 
[n]	W. T. Kitka, M. K. Falowski, A. M. Marendziak, N. Olszowska, and M. Zaj, “Automation in NSRC SOLARIS With Python and Tango Controls”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 381. doi:10.18429/JACoW-ICALEPCS2019-MOPHA072
[n]	I. E. Campisi et al., “The Fundamental Power Coupler for the Spallation Neutron Source (SNS) Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH153, pp. 1140-1142. 
[n]	J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n]	R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 913-915. doi:10.18429/JACoW-IPAC2018-TUPAF078
[n]	Yu. Shvyd, K.-J. Kim, R. R. Lindberg, D. Shu, H. Sinn, and S. Stoupin, “Feasibility of X-Ray Cavities for Hard X-Ray FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA4, pp. 714-714. 
[n]	B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n]	B. Breitkreutz, R. Stassen, and H. Stockhorst, “Design of Stochastic Pick-Ups and Kickers for Low Beta Particle Beams”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 68-71. doi:10.18429/JACoW-COOL2017-TUP17
[n]	M. Killenberg et al., “Drivers and Software for MicroTCA.4”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 725-728. doi:10.18429/JACoW-ICALEPCS2015-WEPGF015
[n]	W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n]	J. Mariethoz, F. B. Bernard, R. H. Harrison, P. Le Roux, M. P. Peryt, and M. Zerlauth, “The Importance of Layout and Configuration Data for Flexibility during Commissioning and Operation of the LHC Machine Protection Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS142, pp. 2712-2714. 
[n]	S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309. 
[n]	K. L. F. Bane et al., “Impedance and Single Bunch Instability Calculations for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS061, pp. 4141-4143. 
[n]	T. G. Xu et al., “The Study on Beam Loss Control Based on a High Intensity RFQ”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD59, pp. 223-225. 
[n]	M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX. 
[n]	W. J. Schneider et al., “First Cell Magnet System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3269-3272. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search