JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Wei et al., “High-Order-Modes Damping in Superconducting Harmonic Cavity for HALF storage ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM001, unpublished. 
[n]	O. Marcouill?® et al., “Production of High Flux Hard X-ray Photons at SOLEIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD009, pp. 3102-3104. 
[n]	S. Chapelle, E. L. Hubbard, T. L. Smith, M. E. Schulze, and R. E. Shafer, “Development of a Raster Electronics System for Expanding the APT Proton Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4089, pp. 612-614. 
[n]	Y. Gomei and M. Kawai, “The Condition of gamma-Ray Emission by Electrons Interacting with the Wall in Medium Energy Electron Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 828-831. 
[n]	A. C. Kabel, “Particle Tracking and Bunch Population in TraFiC4 2.0”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG039, pp. 3539-3541. 
[n]	F. Aghion, D. Giove, and G. Cuttone, “The Operator Interface in the Control System for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-08, pp. 432-435. 
[n]	I. Khokhriakov, V. Mazalova, and O. Merkulova, “Improving Observability of the SCADA Systems Using Elastic APM, Reactive Streams and Asynchronous Communication”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1016-1021. doi:10.18429/JACoW-ICALEPCS2023-WE3BCO04
[n]	I. A. Yurin, M. S. Dmitriyev, E. N. Indiushnii, and S. M. Polozov, “Light Ion Accelerator Magnets”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 390-392. doi:10.18429/JACoW-RuPAC2021-WEPSC21
[n]	B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019. 
[n]	S. Pei, S. Wang, P. Gu, and B. Liu, “Optimization Studies on BEPCII Future Pre-Injector with Two Subharmonic Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11003, pp. XX-XX. 
[n]	K. Zhao et al., “Laboratory Activities on RF Superconductvity at Peking University”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B06, pp. XX-XX. 
[n]	D. G. Kim, H.-C. Bhang, and J.-W. Kim, “Beam Emittance Measurement in the Injection Beam Line for a Cyclotron Accelerator Mass Spectrometer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS045, pp. 3523-3525. 
[n]	F. Aghion, D. Giove, A. Paccalini, G. Rivoltella, and G. Cuttone, “The Distributed Control System with Decentralized Access to an Optical Bus for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-07, pp. 428-431. 
[n]	L. Emery, M. Borland, R. J. Dejus, E. Gluskin, and E. Moog, “Progress and Prospects Towards Brightness Improvements at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH065, pp. 2602-2604. 
[n]	T. Kozawa et al., “ISIR Subpicosecond Pulse Radiolysis System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP151, pp. 2596-2598. 
[n]	D. Taggart, H. H. Fleischmann, H. Hopman, and M. R. Parker, “Successful Betatron Acceleration of Kiloampere Electron Rings in RECE-Christa”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3165-3168. 
[n]	S. Naqvi, G. S. Kerslick, J. A. Nation, and Q. Wang, “High Efficiency TWT Amplifiers”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P019, pp. 3117-3119. 
[n]	S. V. Kuzikov, J. L. Hirshfield, M. E. Plotkin, and A. A. Vikharev, “Compact Single-channel Ka-band SLED-II Pulse Compressor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH165, pp. 1411-1413. 
[n]	E. Trakhtenberg, E. Gluskin, P. Den Hartog, T. Klippert, G. Wiemerslage, and S. Xu, “The Vacuum System for Insertion Devices at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP16, pp. 2072-2074. 
[n]	S. T. Boogert et al., “A Laser-wire System at the ATF Extraction Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS080, pp. 738-740. 
[n]	A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960. 
[n]	J. Zhao, S. Zhang, and Z. Z. Zhou, “Quench Protection in Digital Power Supplies for Superconducting Magnets in ADS”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 233-234. doi:10.18429/JACoW-SRF2017-MOPB075
[n]	W. Blokland, J. G. Patton, T. A. Pelaia, T. R. Pennisi, J. D. Purcell, and M. Sundaram, “Status of Various SNS Diagnostic Systems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOBC01, pp. 2658-2660. 
[n]	P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search