Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Seryi, “Accelerator Science and Technology via Inventive Principles of TRIZ”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEXE1, unpublished.
[n] A. V. Elzhov et al., “Features of FEM for Testing of High-gradient Accelerating Structures of Linear Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE112, pp. 2308-2310.
[n] S. Smith, G. Burt, J. Ollier, M. Jenkins, and R. Apsimon, “A low energy linac solution for 3D scanning applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2912-2915. doi:10.18429/JACoW-IPAC2023-WEPA111
[n] M. Patecki, A. S. Fomin, P. D. Hermes, D. Kiko, D. Mirarchi, and S. Redaelli, “A Local Modification of HL-LHC Optics for Improved Performance of the Alice Fixed-Target Layout”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 108-111. doi:10.18429/JACoW-IPAC2022-MOPOST024
[n] R. L. Kustom, “Analytical Study of the Generation and Control of Orbit Errors in the ANL 4-GeV cw Electron Microtron Design”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3229-3232.
[n] N. Tagdulang, T. Günzel, P. Krkotic, J. O'Callaghan Castella, and M. Pont, “Evaluation of the impact of REBCO-coated conductors on the resistive wall impedance of the FCC-hh”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3421-3424. doi:10.18429/JACoW-IPAC2023-WEPL135
[n] M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1554-1556. doi:10.18429/JACoW-IPAC2019-TUPGW066
[n] V. V. Paramonov, “Unit for Matching a Driving Waveguide With a Cavity”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 340-342. doi:10.18429/JACoW-RuPAC2021-WEPSC01
[n] A. Luedeke, “Cognitive Ergonomics of Operational Tools”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUIO06, pp. 1196-1200.
[n] S. Machida, S. Fukumoto, and T. Kato, “Stabilizing Characteristics of Post-Couplers”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3259-3262.
[n] N. A. Tahir, J. Blanco, R. Piriz, R. Schmidt, and A. Shutov, “Shock Impact of High Energy/Intensity Beams with Matter and High Energy Density Physics”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C02, pp. 659-661.
[n] D. Gorelov et al., “RF-Kicker System for Secondary Beams at NSCL/MSU”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE072, pp. 3880-3882.
[n] B. Keil, R. Kramert, G. Marinkovic, P. Pollet, and M. Roggli, “The PSI DSP Carrier (PDC) Board - a Digital Back-end for Bunch-to-bunch and Global Orbit Feedbacks in Linear Accelerators and Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC123, pp. 3272-3274.
[n] S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257.
[n] T. Chen, “Correct Chromaticities of Circular Accelerators without Sextupoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP088L, pp. 992-994.
[n] W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
[n] K. Soutome, H. Tanaka, Y. Shimosaki, and M. Takao, “Nonlinear Lattice Optimization for the SPring-8 Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3091-3094. doi:10.18429/JACoW-IPAC2017-WEPIK070
[n] S. V. Kuzikov et al., “Studies of Thermal Fatigue Caused by Pulsed RF Heating”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH140, pp. 1343-1345.
[n] N. Baboi and D. Noelle, “Commissioning of the FLASH2 Electron Beam Diagnostics in Respect to its use at the European XFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper THIXB1, pp. 712-721.
[n] A. N. Oleinik, M. Ali, K. V. Fedorov, P. Karataev, A. S. Kubankin, and A. V. Shchagin, “Quasi-continuous X-ray and Electron Generation in LiTaO3-based Pyroelectric Accelerator Driven by Periodically Varying Temperature”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB46, unpublished.
[n] M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5138-5141. doi:10.18429/JACoW-IPAC2023-THPM117
[n] J. Strube et al., “Artificial Intelligence for improved facilities operation in the FNAL LINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4491-4494. doi:10.18429/JACoW-IPAC2023-THPL033
[n] W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
[n] Y. Morozumi, “Realistic Evaluation of Local Field Enhancement based on Precision Profilometry of Surface Defects”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC020, pp. 2932-2934.
[n] J.-L. Vay et al., “Simulation of E-Cloud Driven Instability and its Attenuation using a Feedback System in the CERN SPS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEOBRA02, pp. 2438-2440.
[n] V. Sajaev, Z. Liu, J. Nudell, and C. A. Preissner, “Calculation of Expected Orbit Motion Due to Girder Resonant Vibration at the APS Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1269-1271. doi:10.18429/JACoW-IPAC2018-TUPMF011
[n] S. F. Fargier, M. Di Castro, and M. Donzé, “Operational Controls for Robots Integrated in Accelerator Complexes”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 423-428. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO25
[n] N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
[n] T. Magome, H. Tanaka, and K. Togawa, “Work function measurement by means of photoelectron yield spectroscopy using a tunable pulsed laser to investigate short lifetime of the CeB6 thermionic cathode at SACLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA010, unpublished.
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] M. B?Âge, M. Aiba, and A. Streun, “Orbit Correction and Stability Studies for Ultra-Low Emittance Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1728-1730. doi:10.18429/JACoW-IPAC2015-TUPJE048
[n] N. Fukunishi, “BEAM QUALITY STUDIES ON RIKEN RING CYCLOTRON AND RI BEAM FACTORY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P04, pp. XX-XX.
[n] S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
[n] V. Volkov et al., “Single Mode RF Cavity for VEPP-2000 Storage Ring Based Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT092, pp. 752-754.
[n] H. Huang et al., “Quantifying effects of crab cavity RF phase noise on transverse emittance in EIC Hadron Storage Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2399-2401. doi:10.18429/JACoW-IPAC2023-TUPM084
[n] C.-X. Tang et al., “First Experimental Demonstration of the Mechanism of Steady-state Microbunching”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR08, pp. XX-XX.
[n] G. Jang, J. Kim, D. E. Kim, J. Lee, J. Seok, and T. Ha, “Korea-4GSR Lattice Update”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL058, unpublished.
[n] A. S. Aryshev, S. T. Boogert, D. F. Howell, V. Karataev, N. Terunuma, and J. Urakawa, “Sub-micrometer Resolution Transverse Electron Beam Size Measurement System based on Optical Transition Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA052, pp. 193-195.
[n] T. Kobayashi and K. Akai, “LLRF Controls Including Gap Transients at KEKB and Plans for SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 177-184. doi:10.18429/JACoW-eeFACT2016-WET2H7
[n] W. Weingarten and H. Nakai, “A Device to Measure the Resistivity of a Copper Cavity Surface at Low Temperature”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP023, pp. 249-253.
[n] J. Feikes et al., “Progress Towards Realisation of Steady-State Microbunching at the Metrology Light Source”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper MOXB01, unpublished.
[n] X. Zhang and J.-F. Ostiguy, “Simulations of the Electron Cloud Buildups and Suppressions in Tevatron and Main Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN118, pp. 3504-3506.
[n] P. W. Schmor et al., “Status of the TRIUMF ISAC-Facility for Accelerating Radioactive Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B012, pp. 956-958.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Seryi, “Accelerator Science and Technology via Inventive Principles of TRIZ”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEXE1, unpublished.
- A. V. Elzhov et al., “Features of FEM for Testing of High-gradient Accelerating Structures of Linear Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE112, pp. 2308-2310.
- S. Smith, G. Burt, J. Ollier, M. Jenkins, and R. Apsimon, “A low energy linac solution for 3D scanning applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA111, pp. 2912-2915.
- M. Patecki, A. S. Fomin, P. D. Hermes, D. Kiko, D. Mirarchi, and S. Redaelli, “A Local Modification of HL-LHC Optics for Improved Performance of the Alice Fixed-Target Layout”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 108-111.
- R. L. Kustom, “Analytical Study of the Generation and Control of Orbit Errors in the ANL 4-GeV cw Electron Microtron Design”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3229-3232.
- N. Tagdulang, T. Günzel, P. Krkotic, J. O'Callaghan Castella, and M. Pont, “Evaluation of the impact of REBCO-coated conductors on the resistive wall impedance of the FCC-hh”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL135, pp. 3421-3424.
- M. Aiba et al., “Exploring the Potential of the Swiss Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1554-1556.
- V. V. Paramonov, “Unit for Matching a Driving Waveguide With a Cavity”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 340-342.
- A. Luedeke, “Cognitive Ergonomics of Operational Tools”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHAUIO06, pp. 1196-1200.
- S. Machida, S. Fukumoto, and T. Kato, “Stabilizing Characteristics of Post-Couplers”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3259-3262.
- N. A. Tahir, J. Blanco, R. Piriz, R. Schmidt, and A. Shutov, “Shock Impact of High Energy/Intensity Beams with Matter and High Energy Density Physics”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO2C02, pp. 659-661.
- D. Gorelov et al., “RF-Kicker System for Secondary Beams at NSCL/MSU”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE072, pp. 3880-3882.
- B. Keil, R. Kramert, G. Marinkovic, P. Pollet, and M. Roggli, “The PSI DSP Carrier (PDC) Board - a Digital Back-end for Bunch-to-bunch and Global Orbit Feedbacks in Linear Accelerators and Storage Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC123, pp. 3272-3274.
- S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257.
- T. Chen, “Correct Chromaticities of Circular Accelerators without Sextupoles”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP088L, pp. 992-994.
- W. A. Reass et al., “Design, Status, and First Operations of the Spallation Neutron Source Polyphase Resonant Converter Modulator System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC007, pp. 553-557.
- K. Soutome, H. Tanaka, Y. Shimosaki, and M. Takao, “Nonlinear Lattice Optimization for the SPring-8 Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3091-3094.
- S. V. Kuzikov et al., “Studies of Thermal Fatigue Caused by Pulsed RF Heating”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH140, pp. 1343-1345.
- N. Baboi and D. Noelle, “Commissioning of the FLASH2 Electron Beam Diagnostics in Respect to its use at the European XFEL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper THIXB1, pp. 712-721.
- A. N. Oleinik, M. Ali, K. V. Fedorov, P. Karataev, A. S. Kubankin, and A. V. Shchagin, “Quasi-continuous X-ray and Electron Generation in LiTaO3-based Pyroelectric Accelerator Driven by Periodically Varying Temperature”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper TUPSB46, unpublished.
- M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM117, pp. 5138-5141.
- J. Strube et al., “Artificial Intelligence for improved facilities operation in the FNAL LINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL033, pp. 4491-4494.
- W. Gilbert et al., “A 9.1-T Iron-Free Nb-Ti Dipole Magnet with Pancake Windings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2578-2581.
- Y. Morozumi, “Realistic Evaluation of Local Field Enhancement based on Precision Profilometry of Surface Defects”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC020, pp. 2932-2934.
- J.-L. Vay et al., “Simulation of E-Cloud Driven Instability and its Attenuation using a Feedback System in the CERN SPS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEOBRA02, pp. 2438-2440.
- V. Sajaev, Z. Liu, J. Nudell, and C. A. Preissner, “Calculation of Expected Orbit Motion Due to Girder Resonant Vibration at the APS Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1269-1271.
- S. F. Fargier, M. Di Castro, and M. Donzé, “Operational Controls for Robots Integrated in Accelerator Complexes”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO25, pp. 423-428.
- N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
- T. Magome, H. Tanaka, and K. Togawa, “Work function measurement by means of photoelectron yield spectroscopy using a tunable pulsed laser to investigate short lifetime of the CeB6 thermionic cathode at SACLA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA010, unpublished.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- M. B?Âge, M. Aiba, and A. Streun, “Orbit Correction and Stability Studies for Ultra-Low Emittance Storage Rings”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1728-1730.
- N. Fukunishi, “BEAM QUALITY STUDIES ON RIKEN RING CYCLOTRON AND RI BEAM FACTORY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P04, pp. XX-XX.
- S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
- V. Volkov et al., “Single Mode RF Cavity for VEPP-2000 Storage Ring Based Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT092, pp. 752-754.
- H. Huang et al., “Quantifying effects of crab cavity RF phase noise on transverse emittance in EIC Hadron Storage Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM084, pp. 2399-2401.
- C.-X. Tang et al., “First Experimental Demonstration of the Mechanism of Steady-state Microbunching”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR08, pp. XX-XX.
- G. Jang, J. Kim, D. E. Kim, J. Lee, J. Seok, and T. Ha, “Korea-4GSR Lattice Update”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL058, unpublished.
- A. S. Aryshev, S. T. Boogert, D. F. Howell, V. Karataev, N. Terunuma, and J. Urakawa, “Sub-micrometer Resolution Transverse Electron Beam Size Measurement System based on Optical Transition Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA052, pp. 193-195.
- T. Kobayashi and K. Akai, “LLRF Controls Including Gap Transients at KEKB and Plans for SuperKEKB”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 177-184.
- W. Weingarten and H. Nakai, “A Device to Measure the Resistivity of a Copper Cavity Surface at Low Temperature”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP023, pp. 249-253.
- J. Feikes et al., “Progress Towards Realisation of Steady-State Microbunching at the Metrology Light Source”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper MOXB01, unpublished.
- X. Zhang and J.-F. Ostiguy, “Simulations of the Electron Cloud Buildups and Suppressions in Tevatron and Main Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN118, pp. 3504-3506.
- P. W. Schmor et al., “Status of the TRIUMF ISAC-Facility for Accelerating Radioactive Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B012, pp. 956-958.
Back to search