Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Li, F. Huang, and H. Qu, “RESOLUTIONS OF PROBLEMS THAT OCCURRED IN SPEAR3 MAGNET”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT003, pp. 838-840.
[n] A. Galdi et al., “CsSb atomically smooth thin films as novel visible light photocathodes”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA144, unpublished.
[n] T. J. Roberts, R. J. Abrams, H. J. Frisch, and V. Ivanov, “Simulations of Picosecond Timing Using Large-Area Photodetectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP079, pp. 3630-3632.
[n] E. Kashy, H. G. Blosser, and D. A. Johnson, “Optimized Use of a Cyclotron for High Resolution Studies of Nuclei”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 430-438.
[n] K. Fong and D. W. Storey, “Design of an RF Modulated Thermionic Electron Source at TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4524-4526. doi:10.18429/JACoW-IPAC2018-THPMK095
[n] J. Allinger, G. Danby, B. DeVito, S. Hsieh, J. Jackson, and A. Prodell, “Studies of Performance and Field Reproducibility of a Precision 40 KG Superconducting Dipole Magnet”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 678-683.
[n] G. Brajnik et al., “Test and Measurements Results of the Pilot Tone Front End Industrialization for Elettra 2.0”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 51-54. doi:10.18429/JACoW-IBIC2022-MOP13
[n] R. Yang, “Improving the dynamic range of a wire scanner up to 1e+7”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG47, unpublished.
[n] K. Unser, “Beam Current Transformer with DC to 200 MHz Range”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 934-939.
[n] S. Magyary et al., “Advanced Light Source Control System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 74-79.
[n] E. Hamwi, G. Hoffstaetter, V. Schoefer, and W. Lin, “Comprehensive modeling of Siberian Snakes in BNL’s AGS: symplectic tracking and optical compensation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 686-689. doi:10.18429/JACoW-IPAC2024-MOPS03
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA001, pp. XX-XX.
[n] S. J. Einarson and T. A. Treado, “Power Coupler Manufacturing and Quality Control at CPI”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2308-2310. doi:10.18429/JACoW-IPAC2014-WEPME024
[n] H. Jun, J. S. Cao, and J. H. Junhui, “Bunch Purity Measurement for BEPCII”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF20, pp. 252-254.
[n] S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
[n] T. Hirose et al., “Generation of Polarized Positrons via Laser-Compton Scattering at the KEK Damping Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D050, pp. 202-204.
[n] G. H. Schroeder, J. Bonthond, U. Jansson, H. Kuhn, M. Mayer, and G. Vossenberg, “The Injection Kicker System of LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1381-1384.
[n] S. Khan, S. Mishra, and M. Gehlot, “Magnetic Measurement of Tapered Gap U50 Undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1188-1191. doi:10.18429/JACoW-IPAC2023-MOPM091
[n] H. R. Kremers, J. P. M. Beijers, S. Brandenburg, V. Mironov, J. Mulder, and S. Saminathan, “Trace Space Reconstruction From Pepperpot Data”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOAK02, pp. 78-80.
[n] B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
[n] R. Chasman, “Numerical Calculations of Coupling Effects in a Low Energy Proton Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-05, pp. 224-228.
[n] Yu. Lurie and Y. Pinhasi, “Modal Description of Longitudinal Space-Charge Fields in Pulse-Driven Free-Electron Devices”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC26, pp. 95-98.
[n] R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 913-915. doi:10.18429/JACoW-IPAC2018-TUPAF078
[n] P. A. Chamouard, J. M. Lagniel, and J. L. Lemaire, “SATURNE Linac Performances in 2 Mode for Polarized Protons Acceleration”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper J104, pp. 352-355.
[n] E. A. Crosbie, “Effect of Synchrotron Radiation in the Propsed 4-GeV Argonne Microtron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3218-3221.
[n] S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 372-375.
[n] K. G. Mirzoev, A. M. Kiver, V. G. Lapygin, and A. V. Larionov, “The Detection of the Leaks Location in the Vacuum Chamber According to Sputter-Ion Pumps Current Measurements”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC016, pp. 355-356.
[n] E. Lee et al., “Lessons learned from hardware failure during HL-LHC AUP cabling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2891-2894. doi:10.18429/JACoW-IPAC2024-WEPS80
[n] E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2345-2348.
[n] C. Curtis, “Ion Source and Injector Development”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
[n] S. Humphries and J. Petillo, “Modeling Relativistic Electron Beams with Finite-Element Ray-Tracing Codes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA54, pp. 2737-2739.
[n] M. Conte, A. U. Luccio, W. W. MacKay, and M. Pusterla, “Stern-Gerlach Force on a Precessing Magnetic Moment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS105, pp. 3729-3731.
[n] L. G. Liu, “Linear Optics Calibrations for the SSRF Storage Ring Based on COD”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP028, pp. 4366-4368.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Li, F. Huang, and H. Qu, “RESOLUTIONS OF PROBLEMS THAT OCCURRED IN SPEAR3 MAGNET”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT003, pp. 838-840.
- A. Galdi et al., “CsSb atomically smooth thin films as novel visible light photocathodes”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA144, unpublished.
- T. J. Roberts, R. J. Abrams, H. J. Frisch, and V. Ivanov, “Simulations of Picosecond Timing Using Large-Area Photodetectors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP079, pp. 3630-3632.
- E. Kashy, H. G. Blosser, and D. A. Johnson, “Optimized Use of a Cyclotron for High Resolution Studies of Nuclei”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 430-438.
- K. Fong and D. W. Storey, “Design of an RF Modulated Thermionic Electron Source at TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4524-4526.
- J. Allinger, G. Danby, B. DeVito, S. Hsieh, J. Jackson, and A. Prodell, “Studies of Performance and Field Reproducibility of a Precision 40 KG Superconducting Dipole Magnet”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 678-683.
- G. Brajnik et al., “Test and Measurements Results of the Pilot Tone Front End Industrialization for Elettra 2.0”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 51-54.
- R. Yang, “Improving the dynamic range of a wire scanner up to 1e+7”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG47, unpublished.
- K. Unser, “Beam Current Transformer with DC to 200 MHz Range”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 934-939.
- S. Magyary et al., “Advanced Light Source Control System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 74-79.
- E. Hamwi, G. Hoffstaetter, V. Schoefer, and W. Lin, “Comprehensive modeling of Siberian Snakes in BNL’s AGS: symplectic tracking and optical compensation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS03, pp. 686-689.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOA001, pp. XX-XX.
- S. J. Einarson and T. A. Treado, “Power Coupler Manufacturing and Quality Control at CPI”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2308-2310.
- H. Jun, J. S. Cao, and J. H. Junhui, “Bunch Purity Measurement for BEPCII”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF20, pp. 252-254.
- S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
- T. Hirose et al., “Generation of Polarized Positrons via Laser-Compton Scattering at the KEK Damping Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D050, pp. 202-204.
- G. H. Schroeder, J. Bonthond, U. Jansson, H. Kuhn, M. Mayer, and G. Vossenberg, “The Injection Kicker System of LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1381-1384.
- S. Khan, S. Mishra, and M. Gehlot, “Magnetic Measurement of Tapered Gap U50 Undulator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM091, pp. 1188-1191.
- H. R. Kremers, J. P. M. Beijers, S. Brandenburg, V. Mironov, J. Mulder, and S. Saminathan, “Trace Space Reconstruction From Pepperpot Data”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUCOAK02, pp. 78-80.
- B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291.
- R. Chasman, “Numerical Calculations of Coupling Effects in a Low Energy Proton Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper V-05, pp. 224-228.
- Yu. Lurie and Y. Pinhasi, “Modal Description of Longitudinal Space-Charge Fields in Pulse-Driven Free-Electron Devices”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC26, pp. 95-98.
- R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 913-915.
- P. A. Chamouard, J. M. Lagniel, and J. L. Lemaire, “SATURNE Linac Performances in 2 Mode for Polarized Protons Acceleration”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper J104, pp. 352-355.
- E. A. Crosbie, “Effect of Synchrotron Radiation in the Propsed 4-GeV Argonne Microtron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3218-3221.
- S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 372-375.
- K. G. Mirzoev, A. M. Kiver, V. G. Lapygin, and A. V. Larionov, “The Detection of the Leaks Location in the Vacuum Chamber According to Sputter-Ion Pumps Current Measurements”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC016, pp. 355-356.
- E. Lee et al., “Lessons learned from hardware failure during HL-LHC AUP cabling”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS80, pp. 2891-2894.
- E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2345-2348.
- C. Curtis, “Ion Source and Injector Development”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
- S. Humphries and J. Petillo, “Modeling Relativistic Electron Beams with Finite-Element Ray-Tracing Codes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA54, pp. 2737-2739.
- M. Conte, A. U. Luccio, W. W. MacKay, and M. Pusterla, “Stern-Gerlach Force on a Precessing Magnetic Moment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS105, pp. 3729-3731.
- L. G. Liu, “Linear Optics Calibrations for the SSRF Storage Ring Based on COD”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP028, pp. 4366-4368.
Back to search