JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025. 
[n]	R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484. 
[n]	Y. G??mez Mart?¡nez et al., “Power Couplers for Spiral-2”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA04, pp. 947-950. 
[n]	V. A. Verzilov and P. E. Dirksen, “OTR Measurements with Sub-MeV Electrons”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 501-503. doi:10.18429/JACoW-IBIC2016-TUPG65
[n]	F. Anton, “Beam Diagnostics at the COSY Injection Beamline”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1341-1344. 
[n]	E. Rossa, C. Bovet, L. Disdier, F. Madeline, and J. J. Savioz, “Real Time Measurement of Bunch Instabilities in LEP in Three Dimensions using a Streak Camera”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 144-147. 
[n]	K. J. Bertsche, W. Wittmer, B. Bolzon, L. Brunetti, A. Jeremie, and S. Tomassini, “Vibration Budget for SuperB”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP069, pp. 2261-2263. 
[n]	A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966. 
[n]	H. Rudd, I. Haber, and M. Reiser, “Simulation Studies of Emittance Growth from Image-Charge and Focusing-Field Nonlinearities in a Periodic Solenoidal Channel”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1120-1123. 
[n]	Y. Bao and G. G. Hanson, “INTENSE MUON BEAMS FROM THE CSNS SPALLATION TARGET”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2708-2710. doi:10.18429/JACoW-IPAC2015-WEPJE016
[n]	W. Y. Lai et al., “Design of Vertical and Horizontal Linear Flexure Stages for Beam Size Monitor System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 72-74. doi:10.18429/JACoW-MEDSI2018-TUPH21
[n]	H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX. 
[n]	K. C. Harkay, Y. L. Li, K. Nemeth, R. A. Rosenberg, L. K. Spentzouris, and M. White, “Photocathode Studies for Ultra-Low Emittance Electron Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP045, pp. 458-460. 
[n]	J. G. Hwang, G. Hahn, and T. K. Yang, “Development of Beam Position Monitor for a Heavy-ion Linac of KHIMA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 238-240. doi:10.18429/JACoW-IPAC2016-MOPMR008
[n]	J. E. Richards, R. B. Nussbaumer, S. Rapaz, and G. Waters, “ISAC EPICS on Linux: The March of the Penguins”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS004, pp. 778-781. 
[n]	Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551. 
[n]	D. L. Bruhwiler et al., “Cross-platform and Cloud-based Access to Multiple Particle Accelerator Codes via Application Containers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 720-723. doi:10.18429/JACoW-IPAC2015-MOPMN009
[n]	D. B. Morris, “ControlView to EPICS Conversion of the TRIUMF TR13 Cyclotron Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU033, pp. 510-513. 
[n]	A. A. Mondelli and D. P. Chernin, “Plasma-Focused Cyclic Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3521-3524. 
[n]	B. Zwicker, O. K. Kester, C. Dorn, P. Forck, and P. Kowina, “Performance Demonstration of the Non-Invasive Bunch Shape Monitor at GSI High Current LINAC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD07, pp. 421-425. 
[n]	L. Muguira et al., “Automatic Tuner Unit Operation for the Microwave System of the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD070, pp. 2684-2686. 
[n]	R. Monroy-Villa et al., “Status of the New Quadrupole Resonator for SRF R&D”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 751. doi:10.18429/JACoW-SRF2021-THPFDV001
[n]	S. White, L. Carver, L. Farvacque, and S. Liuzzo, “Status and recent developments of python Accelerator Toolbox”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3185-3188. doi:10.18429/JACoW-IPAC2023-WEPL031
[n]	Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2336-2338. doi:10.18429/JACoW-IPAC2015-TUPWI040
[n]	J. P. Meulders and A. Wambersie, “Survey of the ''Pretherapeutic'' Experiments with Fast Neutrons Produced with the 50-MeV Deuteron Beam of Cyclone”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-06, pp. 431-435. 
[n]	J. A. Holmes, M. R. Perkett, M. A. Plum, J.-G. Wang, and Y. Zhang, “ORBIT Injection Dump Simulations of the H0 and H- Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS076, pp. 3657-3659. 
[n]	Y. F. Yang, H. H. Lu, S. C. Sun, and X. Z. Zhang, “Field Error Correction Considerations of Cryogenic Permanent Magnet Undulator (CPMU) for High Energy Photon Source Test Facility (HEPS-TF)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4038-4040. doi:10.18429/JACoW-IPAC2016-THPOW041
[n]	H. Li et al., “Progress and Preliminary Statistics for the ESS Series Spoke Cryomodule Test”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 512. doi:10.18429/JACoW-SRF2021-TUPTEV012
[n]	R. Abbott and P. King, “Control System Design for the LIGO Pre-Stabilized Laser”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP038, pp. XX-XX. 
[n]	G. Chen et al., “Research and Development of RF System for SC200 Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3616-3618. doi:10.18429/JACoW-IPAC2018-THPAL004
[n]	V. Kiselev, E. Levichev, V. Sajaev, and V. Smaluk, “Dynamic Aperture Study in the VEPP-4M Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V033, pp. 1466-1468. 
[n]	J. K. Pozimski et al., “Status Report on the RAL Front End Test Stand”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN111, pp. 1634-1636. 
[n]	G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677. 
[n]	C. L. Morris, “Muon Radiography”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAB008, unpublished. 
[n]	S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577. 
[n]	R. C. Davidson, H. Qin, and G. Shvets, “Instability Driven by Wall Impedance in Intense Charged Particle Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB051, pp. 3117-3119. 
[n]	S. Gerstl et al., “First Characterization of a Superconducting Undulator Mockup with the CASPER II Magnetic Measurement System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2815-2817. doi:10.18429/JACoW-IPAC2015-WEPMA027
[n]	B. Goddard, W. Bartmann, I. Efthymiopoulos, Y. Papaphilippou, and A. S. Parfenova, “Beam Transfer Systems for the LAGUNA-LBNO Long Baseline Neutrino Beam from the CERN SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI051, pp. 395-397. 
[n]	A. Webber-Date, C. Swain, J. Wolfenden, C. Welsch, and H. Zhang, “Characterisation and analysis of supersonic gas jets using interferometric measurement methods”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4588-4591. doi:10.18429/JACoW-IPAC2023-THPL068
[n]	C. Crouzel, D. Comar, C. Kellershohn, R. Knipper, C. Le Poec, and C. Sejourne, “Installation of a Compact Variable Energy Cyclotron in a Hospital and Preliminary Results Obtained”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-08, pp. 440-443. 
[n]	G. T. de Kruiff and N. F. Verster, “A Modified Regenerative Extractor System for a Synchro - Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B05, pp. XX-XX. 
[n]	J. Hinkson and K. Rex, “A Wide Band Slot-Coupled Beam Sensing Electrode for the Advanced Light Source (ALS)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1234-1237. 
[n]	S. Littleton, “Field-adapted coordinate transformations for rotating and accelerating beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3260-3262. doi:10.18429/JACoW-IPAC2023-WEPL067
[n]	B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048. 
[n]	H. L. Hagedoorn and N. F. Verster, “The Magnetic Field of a Two-Particle Fixed Energy AVF Cyclotron without Trimming Coils”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F07, pp. XX-XX. 
[n]	H. J. Wang, L. Kang, H. Qu, L. Wu, and D. H. Zhu, “Material Test of Proton Beam Window for CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2927-2930. doi:10.18429/JACoW-IPAC2015-WEPMN008
[n]	J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229. 
[n]	L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n]	D. Belver, J. Feuchtwanger, P. J. Gonzalez, F. J. Bermejo, V. Etxebarria, and J. Jugo, “Design and Measurements of a Test Stand for the SEM-Grid System of the ESS-BILBAO”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR040, pp. 867-869. 
[n]	J. Caporaso, “Transmission Line Analysis of Beam Deflection in a BPM Stripline Kicker”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V041, pp. 1861-1863. 
[n]	Y. C. Zhang, S. P. Li, H. H. Lu, S. C. Sun, and Y. F. Yang, “Preliminary Design of Cooling System for a PrFeB-based Cryogenic Permanent Magnet Undulator Prototype at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2743-2745. doi:10.18429/JACoW-IPAC2014-WEPRI105
[n]	W. L. Dexter, “Automated Multiple-Beam Charged-Particle Transport System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 898-901. 
[n]	T. Plettner et al., “Inverse-Transition Radiation Laser Acceleration Experiments at SLAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS080, pp. 3172-3174. 
[n]	Y. Bao, C. Blume, A. Caldwell, and D. Greenwald, “Frictional Cooling Demonstration at MPP”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCCO03, pp. 55-58. 
[n]	C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898. 
[n]	J. R. Freeman and J. S. Wagner, “Numerical Models of Beam Dynamics in Ion Induction Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU412, pp. 332-334. 
[n]	W. K. Tucker, D. E. Hasti, and S. L. Shope, “Recirculating Electron Beam Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 957-960. 
[n]	G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4243-4247. doi:10.18429/JACoW-IPAC2016-FRXAA01
[n]	A. S. Parfenova, C. Baumgarten, J. M. Humbel, A. C. Mezger, and A. V. Petrenko, “Measurements of the Beam Phase Response to Correcting Magnetic Fields in PSI Cyclotrons”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1271-1273. doi:10.18429/JACoW-IPAC2016-TUPMR019

For LaTeX

Use Complete Form

For BibTeX

References

Back to search