Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. E. Wheelhouse et al., “Superconducting RF Cavity Development With UK Industry”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP030, pp. 966-968.
[n] D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
[n] R. A. Dehn, J. E. Griffin, and Q. A. Kerns, “Mode Damping in NAL Main Ring Accelerating Cavities”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 260-262.
[n] Z. Tibai, G. Alm?ísi, Zs. Csiha-Nagy, J. A. F??l?Âp, J. Hebling, and Gy. T??th, “Carrier-Envelope-Phase Stable Linearly and Circularly Polarized Attosecond Pulse Sources”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 205-208. doi:10.18429/JACoW-FEL2015-MOP071
[n] R. E. Melen, B. Salsburg, and J. Yang, “Vacuum Contol System for Synchrotron Radiation Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3919-3922.
[n] A. Mikhailichenko and T. Moore, “Simple Procedure for Superconducting Coil Winding”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH319, pp. 3645-3647.
[n] P. Nghiem, M. Sommer, and H. Zyngier, “Compensation Schemes for Undulator Insertion”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 800-803.
[n] A. W. Maschke and W. Oleksiuk, “The NAL Booster-to-Main Ring Beam Transfer System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 989-991.
[n] E. O. Popov, A. A. Pashkevich, S. O. Popov and A. V. Vitugov, “Charge Particle Source for Industrial and Research Accelerators Operating at the Poor Vacuum Conditions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT128, pp. 2149-2151.
[n] H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
[n] M. B. Alves, L. Liu, and F. H. de S?í, “Simulation of Sirius Booster Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3366-3369. doi:10.18429/JACoW-IPAC2019-WEPTS105
[n] L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
[n] V. Parma et al., “The Assembly of the LHC Short Straight Sections (SSS) at CERN: Project Status and Lessons Learned”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT045, pp. 2890-2892.
[n] B. N. Gikal, G. G. Gulbekian, and V. B. Kutner, “Recent Developments at Dubna U400 and U400M Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-01, pp. 587-591.
[n] M. Caron et al., “High Intensity High Energy E-Beam Interacting with a Thin Solid State Target: First Results at AIRIX”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE027, pp. 1982-1984.
[n] T. Sen, Y. Alexahin, B. Erd?®lyi, and M. Xiao, “Studies of Beam-beam Interactions in Run IIa at the Tevatron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE033, pp. 368-370.
[n] L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
[n] S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 649-654. doi:10.18429/JACoW-ICALEPCS2017-TUPHA101
[n] R. D. Hay and H. Winick, “Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 815-821.
[n] H. H. Yan et al., “A Design of Switch Magnet Power Supply”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP107, pp. 266-268.
[n] P. M. McIntyre, J. Breitschopf, J. Gerity, J. N. Kellams, and A. Sattarov, “Micro-aligned Solenoid for Magnetized Bunched-beam Electron Cooling of 100 GeV/u Ions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4314-4317. doi:10.18429/JACoW-IPAC2019-THPTS087
[n] K. Ito, H. Higaki, K. Izawa, H. Okamoto, and H. Takeuchi, “Coulomb Crystal Extraction from an Ion Trap for Application to Nano-beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBMH03, pp. 3622-3624.
[n] B. Erd?®lyi and T. Sen, “Analytic Studies of the Long Range Beam-Beam Tune Shifts and Chromaticities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI098, pp. 1247-1249.
[n] J. W. Gray and W. A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A04, pp. 2202-2204.
[n] T. Kii, K. Masuda, H. Ohgaki, T. Shiiyama, H. Zen, and S. Sasaki, “Progress in the FEL Lasing in Kyoto University”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH025, pp. 394-397.
[n] E. R. Gray, “Beam-Emittance Measurements on the NAL 200-MeV Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 941-943.
[n] I. V. Kazarezov et al., “Compact Source of Electron Beam with Energy of 200 kEv and Average Power of 2 kW”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP023, pp. 1832-1834.
[n] K. D. Jacobs, J. B. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1526-1529.
[n] H. Toyokawa et al., “Gamma-Ray Computerized Tomography Using 10 MeV Laser-Compton Photon Beam”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA009, pp. 713-715.
[n] V. Yuan and J. D. Bowman, “Study of LAMPF H- Beam Position Motion and a Predictive Algorithm for Noise Reduction”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1979-1982.
[n] V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
[n] H. J. Choi, S. W. Kim, H. S. Kim, and W. W. Lee, “Construction and Implementation of Control and DAQ System of Micro Crystallography (MX) Beamline via Server Virtualization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1150. doi:10.18429/JACoW-ICALEPCS2019-WEPHA033
[n] I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
[n] G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 454-457.
[n] D. Vandeplassche et al., “Extraction Simulations For The Iba C70 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 63-65.
[n] W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2769-2772.
[n] B. Salvant et al., “Coupling Impedance of the CERN SPS Beam Position Monitors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP049, pp. 4646-4648.
[n] S. I. Sharamentov, V. V. Edachev, A. I. Kvasha, A. D. Belov, and V. V. Kuznetsov, “Progress of the Moscow Meson Factory Linac RF Phase and Amplitude Control System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-06, pp. 308-310.
[n] W. J. Corbett, G. J. Portmann, J. A. Safranek, and A. Terebilo, “SPEAR 3 Commissioning Software”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT147, pp. 884-886.
[n] M. G. Mazarakis et al., “Design and Power Flow Studies of a 500-TW Inductive Voltage Adder (IVA) Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE06, pp. 1201-1203.
[n] F. B?©dker, H. Bach, K. I. Blomquist, M. B?©ttcher, and M. N. Pedersen, “Recent Insertion Devices Produced at Danfysik A/S”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE034, pp. 2601-2603.
[n] Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1143-1151.
[n] L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
[n] P. van Amersfoort et al., “The Electron Accelerator for FELIX”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-01, pp. 305-307.
[n] D. Rees and C. Friedrichs, “Increasing Output Power of a 850 MHz Tetrode with a Floating-Deck Modulator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH463, pp. 767-769.
[n] R. L. Keizer, K. H. Kissler, and R. Oberli, “Improvement of the Extraction Channels of the CERN-SPS Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1836-1839.
[n] W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
[n] J. J. Ramirez, “Very High Pulse-Energy Accelerators”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1446-1451.
[n] S. L. Kramer, E. A. Crosbie, S. Kim, R. Wehrle, and M. Yoon, “Vacuum Chamber Themal Protection for the APS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 586-589.
[n] C. Nieter, P. J. Mullowney, S. Ovtchinnikov, D. S. Smithe, and P. Stoltz, “Self-Consistent Simulations of Multipacting in Superconducting Radio Frequencies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAAB01, pp. 769-771.
For LaTeX
Use Complete Form
For BibTeX
References
- A. E. Wheelhouse et al., “Superconducting RF Cavity Development With UK Industry”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP030, pp. 966-968.
- D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOD04, pp. 884-888.
- R. A. Dehn, J. E. Griffin, and Q. A. Kerns, “Mode Damping in NAL Main Ring Accelerating Cavities”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 260-262.
- Z. Tibai, G. Alm?ísi, Zs. Csiha-Nagy, J. A. F??l?Âp, J. Hebling, and Gy. T??th, “Carrier-Envelope-Phase Stable Linearly and Circularly Polarized Attosecond Pulse Sources”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 205-208.
- R. E. Melen, B. Salsburg, and J. Yang, “Vacuum Contol System for Synchrotron Radiation Beam Lines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3919-3922.
- A. Mikhailichenko and T. Moore, “Simple Procedure for Superconducting Coil Winding”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH319, pp. 3645-3647.
- P. Nghiem, M. Sommer, and H. Zyngier, “Compensation Schemes for Undulator Insertion”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 800-803.
- A. W. Maschke and W. Oleksiuk, “The NAL Booster-to-Main Ring Beam Transfer System”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 989-991.
- E. O. Popov, A. A. Pashkevich, S. O. Popov and A. V. Vitugov, “Charge Particle Source for Industrial and Research Accelerators Operating at the Poor Vacuum Conditions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT128, pp. 2149-2151.
- H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
- M. B. Alves, L. Liu, and F. H. de S?í, “Simulation of Sirius Booster Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3366-3369.
- L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
- V. Parma et al., “The Assembly of the LHC Short Straight Sections (SSS) at CERN: Project Status and Lessons Learned”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT045, pp. 2890-2892.
- B. N. Gikal, G. G. Gulbekian, and V. B. Kutner, “Recent Developments at Dubna U400 and U400M Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-01, pp. 587-591.
- M. Caron et al., “High Intensity High Energy E-Beam Interacting with a Thin Solid State Target: First Results at AIRIX”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE027, pp. 1982-1984.
- T. Sen, Y. Alexahin, B. Erd?®lyi, and M. Xiao, “Studies of Beam-beam Interactions in Run IIa at the Tevatron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE033, pp. 368-370.
- L. Tkachenko et al., “Dipole with Coil Based on High Temperature Superconductor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH309, pp. 3624-3626.
- S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 649-654.
- R. D. Hay and H. Winick, “Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 815-821.
- H. H. Yan et al., “A Design of Switch Magnet Power Supply”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP107, pp. 266-268.
- P. M. McIntyre, J. Breitschopf, J. Gerity, J. N. Kellams, and A. Sattarov, “Micro-aligned Solenoid for Magnetized Bunched-beam Electron Cooling of 100 GeV/u Ions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4314-4317.
- K. Ito, H. Higaki, K. Izawa, H. Okamoto, and H. Takeuchi, “Coulomb Crystal Extraction from an Ion Trap for Application to Nano-beam Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOBMH03, pp. 3622-3624.
- B. Erd?®lyi and T. Sen, “Analytic Studies of the Long Range Beam-Beam Tune Shifts and Chromaticities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI098, pp. 1247-1249.
- J. W. Gray and W. A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A04, pp. 2202-2204.
- T. Kii, K. Masuda, H. Ohgaki, T. Shiiyama, H. Zen, and S. Sasaki, “Progress in the FEL Lasing in Kyoto University”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH025, pp. 394-397.
- E. R. Gray, “Beam-Emittance Measurements on the NAL 200-MeV Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 941-943.
- I. V. Kazarezov et al., “Compact Source of Electron Beam with Energy of 200 kEv and Average Power of 2 kW”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP023, pp. 1832-1834.
- K. D. Jacobs, J. B. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1526-1529.
- H. Toyokawa et al., “Gamma-Ray Computerized Tomography Using 10 MeV Laser-Compton Photon Beam”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAA009, pp. 713-715.
- V. Yuan and J. D. Bowman, “Study of LAMPF H- Beam Position Motion and a Predictive Algorithm for Noise Reduction”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1979-1982.
- V. Zubko et al., “ENTHALPY MARGIN AND STABILITY OF FAST-CYCLING DIPOLE FOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFP07, pp. XX-XX.
- H. J. Choi, S. W. Kim, H. S. Kim, and W. W. Lee, “Construction and Implementation of Control and DAQ System of Micro Crystallography (MX) Beamline via Server Virtualization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1150.
- I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
- G. von Holtey, W. Niessen, and P. Roudeau, “Synchrotron Radiation Masks for LEP2”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 454-457.
- D. Vandeplassche et al., “Extraction Simulations For The Iba C70 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 63-65.
- W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2769-2772.
- B. Salvant et al., “Coupling Impedance of the CERN SPS Beam Position Monitors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP049, pp. 4646-4648.
- S. I. Sharamentov, V. V. Edachev, A. I. Kvasha, A. D. Belov, and V. V. Kuznetsov, “Progress of the Moscow Meson Factory Linac RF Phase and Amplitude Control System”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-06, pp. 308-310.
- W. J. Corbett, G. J. Portmann, J. A. Safranek, and A. Terebilo, “SPEAR 3 Commissioning Software”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT147, pp. 884-886.
- M. G. Mazarakis et al., “Design and Power Flow Studies of a 500-TW Inductive Voltage Adder (IVA) Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE06, pp. 1201-1203.
- F. B?©dker, H. Bach, K. I. Blomquist, M. B?©ttcher, and M. N. Pedersen, “Recent Insertion Devices Produced at Danfysik A/S”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE034, pp. 2601-2603.
- Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1143-1151.
- L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
- P. van Amersfoort et al., “The Electron Accelerator for FELIX”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-01, pp. 305-307.
- D. Rees and C. Friedrichs, “Increasing Output Power of a 850 MHz Tetrode with a Floating-Deck Modulator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH463, pp. 767-769.
- R. L. Keizer, K. H. Kissler, and R. Oberli, “Improvement of the Extraction Channels of the CERN-SPS Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1836-1839.
- W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
- J. J. Ramirez, “Very High Pulse-Energy Accelerators”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1446-1451.
- S. L. Kramer, E. A. Crosbie, S. Kim, R. Wehrle, and M. Yoon, “Vacuum Chamber Themal Protection for the APS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 586-589.
- C. Nieter, P. J. Mullowney, S. Ovtchinnikov, D. S. Smithe, and P. Stoltz, “Self-Consistent Simulations of Multipacting in Superconducting Radio Frequencies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAAB01, pp. 769-771.
Back to search