JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. A. Green and S. Chouhan, “Cooling-down and Cooling of Superconducting Magnets at 4.5K with Very Little Liquid Helium using Coolers”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3606-3608. doi:10.18429/JACoW-IPAC2017-WEPVA143
[n]	R. Mishra, R. K. Agrawal, P. Fatnani, B. N. Merh, C. P. Navathe, and S. Pal, “Data Logging System Upgrade for Indus Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD01, pp. 12-14. 
[n]	Y.-H. Liu, Y.-C. Chung, C. K. Kuan, and Z.-D. Tsai, “The Data Acquisition System and Inspection Equipment on Vibration Evaluation for Deionized and Cooling Water Pumps in TPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3568-3570. doi:10.18429/JACoW-IPAC2017-WEPVA128
[n]	R. K. Agrawal, A. M. Gupta, B. Merh, P. Fatnani, and S. Gangopadhyay, “Software Scenario for Control System of INDUS-2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_014. 
[n]	C. Belver-Aguilar and M. J. Barnes, “Review of Stripline Beam Impedance: Application to the Extraction Kicker for the CLIC Damping Rings”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3499-3502. doi:10.18429/JACoW-IPAC2017-WEPVA101
[n]	M. Birk, R. Ducar, Q. Kerns, and G. Tool, “The RF Control System of the NAL Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 427-432. 
[n]	W. Gai, “Performance of the Argonne Wakefield Accelerator Facility and Initial Experimental Results”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MO301, pp. 39-46. 
[n]	M. M. Peng and W. Gai, “Simulations of Positron Capture and Acceleration in the Linear Wakefield of Plasma”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1737-1739. doi:10.18429/JACoW-IPAC2017-TUPIK026
[n]	J. T. Maniscalco, F. Furuta, D. L. Hall, P. N. Koufalis, and M. Liepe, “Analysis of Mean Free Path and Field Dependent Surface Resistance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3609-3611. doi:10.18429/JACoW-IPAC2017-WEPVA145
[n]	S. Udongwo, R. Calaga, S. G. Zadeh, and U. van Rienen, “Optimization of Two-Cell Cavities for the W and H Working Points of the FCC-ee Considering Higher-Order Mode Effects”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2292-2295. doi:10.18429/JACoW-IPAC2021-TUPAB341
[n]	J. W. Kwan et al., “A Multiple-Beam Injector for Heavy Ion Inertial Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA23, pp. 1937-1939. 
[n]	J. Dietrich et al., “Status of the 2 MeV Electron Cooler for COSY/ HESR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD067, pp. 843-845. 
[n]	R. Fielder, R. Husain, F. Malinowski, and S. Wang, “Impedance database for the Diamond-II booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3108-3111. doi:10.18429/JACoW-IPAC2024-THPC49
[n]	H. Ouyang, S. Fu, X. Guan, W. Xu, and T. Xu, “The Study on the Design of an Intense-Beam RFQ with Stability”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21016, pp. XX-XX. 
[n]	B. N. Merh, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “API Manager Implementation and its Use for Indus Accelerator Control”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD17, pp. 175-177. 
[n]	B. C. Kuske and M. Abo-Bakr, “Optics Development and Trajectory Tuning of BERLinPro at Low Energies”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 153-155. doi:10.18429/JACoW-IPAC2017-MOPAB033
[n]	M. A. Harrison et al., “Further Analysis of Corrugated Plate Dechirper Experiment at BNL-ATF”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP034, pp. 788-789. 
[n]	T. Roser, “RHIC Status and Plans”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA002, pp. 24-28. 
[n]	T. Sen, “New Aspects of Beam-Beam Interactions in Hadron Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPA004, pp. 34-38. 
[n]	V. L. Auslender, “ILU-Electron Accelerators for Industry”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 288-290. 
[n]	S. P. Antipov et al., “A Tunable Energy Chirp Correction”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO19, pp. 279-281. 
[n]	J.-P. Thiry and W. Hillert, “Lattice Matching with Elegant at ELSA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2690-2692. doi:10.18429/JACoW-IPAC2016-WEPOR011
[n]	W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920. 
[n]	T. J. Roberts and D. M. Kaplan, “G4Beamline Simulation Program for Matter-dominated Beamlines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN103, pp. 3468-3470. doi:10.1109/PAC.2007.4440461
[n]	Y. V. Yelaev, “Calculation of Tolerance and Stastistical Test”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB021, pp. 358-360. 
[n]	H. Bizek, E. Crosbie, E. Lessner, L. Teng, and J. Wirsbinski, “Effects of Errors on the Dynamic Aperture of the Advanced Photon Source Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 210-213. 
[n]	S. P. Antipov et al., “Subpicosecond Bunch Train Production for High Power Tunable THz Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA08, pp. 604-606. 
[n]	M. A. C. Cummings and D. M. Kaplan, “Muon Cooling Research and Development”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB089, pp. 1798-1800. 
[n]	J. W. Gray and W. A. Morris, “Upgrade of the ISIS Main Magnet Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A04, pp. 2202-2204. 
[n]	A. Chakrabarti, “Radioactive Ion Beam Facility Development at VECC, Kolkata”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA202, pp. XX-XX. 
[n]	E. Plawski, A. Kucharczyk, and S. Kulinski, “The Technical Realisation of RF Kickers for CLIC Test Facility CTF3”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB029, pp. 2787-2789. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Improving Code Quality of the Compact Muon Solenoid Electromagnetic Calorimeter Control Software to Increase System Maintainability”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC088, pp. 306-309. 
[n]	K. Reimers, V. Kamerdzhiev, and A. Pernizki, “Adjustable Optics for a Non-destructive Beam Profile Monitor based on Scintillation of Residual Gas”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB77, pp. 253-255. 
[n]	M. Korostelev, R. De Maria, S. D. Fartoukh, and A. Wolski, “Optics Transition between Injection and Collision Optics for the HL-LHC Upgrade Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI051, pp. 1460-1462. 
[n]	M. G. Billing, M. Giannella, R. M. Littauer, and G. R. Rouse, “Interaction of CESR Vacuum Pumps with Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1163-1166. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “The Evolution of the Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment at the Large Hadron Collider”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS003, pp. 319-322. 
[n]	A. S. Raja Rao, “Status of SRS INDUS-2”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A003, pp. 641-644. 
[n]	J.-P. Thiry, A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “The New Orbit Correction System at ELSA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME006, pp. 479-481. 
[n]	Z. K. Liu et al., “Digital Low Level Radio Frequency System for the Booster Ring of the Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2298-2301. doi:10.18429/JACoW-IPAC2018-WEPAL054
[n]	B. S. K. Srivastava, R. K. Agrawal, and P. Fatnani, “Eplanner Software for Machine Activities Management”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO102, pp. 129-131. 
[n]	F. H. O, G. Andonian, and J. B. Rosenzweig, “Permanent Magnet Quadrupole Final Focus System for the Muon Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE077, pp. 3524-3526. 
[n]	F. Trinkel and H. Soltner, “Development and Application of Rogowski Coils as Beam Position Monitors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 223-226. doi:10.18429/JACoW-IPAC2017-MOPAB054
[n]	V. L. Auslender et al., “High-Frequency Powerful Electron Accelerators Type ILU for Industrial Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 182-185. 
[n]	K. Fong, S. Fang, M. Laverty, and Q. Zheng, “RF Control System for ISAC II Superconducting Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB088, pp. 1404-1406. 
[n]	M. H. Rashid, C. Mallik, and R. K. Bhandari, “Symmetric and Sufficient Cusp Field for 18 GHz ECR Ion Source”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16064, pp. XX-XX. 
[n]	J.-P. Thiry, A. Dieckmann, F. Frommberger, W. Hillert, and J. F. Schmidt, “High Bandwidth Closed Orbit Control for a Fast Ramping Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1111-1113. doi:10.18429/JACoW-IPAC2014-TUPRO040
[n]	S. Henderson et al., “SNS Beam Commisioning Status”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT168, pp. 1524-1526. 
[n]	V. L. Auslender, A. A. Bryazgin, A. M. Gonchar, M. V. Korobeynikov, V. I. Serbin, and L. A. Voronin, “Experience of Electron Beam Treatment For Sterilization of Disposal Medical Goods and in Other Medical and Biological Applications”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D058, pp. 816-818. 
[n]	F. Zhou et al., “Experimental Characterization of the Transverse Phase Space of a 60-MeV Electron Beam through a Compressor Chicane”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOBAB02, pp. 788-788. 
[n]	S. Chouksey et al., “Installation and Integration of Indus-2”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA096, pp. 782-784. 
[n]	G. Delogu, C. Desgranges, M. Fumelli, and A. Simonin, “The DRIFT Source : A  Negative Ion Source Module for DC Multi-Amperes Ion Beams”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUO03B, pp. 293-295. 
[n]	R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search