JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. H. Chun et al., “Upgrade Status of the RF System for the PLS Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16038, pp. XX-XX. 
[n]	Z. Ding et al., “Improving the Smoothness of Multialkali Antimonide Photocathodes: An In-Situ X-Ray Reflectivity Study”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 27-29. doi:10.18429/JACoW-ERL2015-TUICLH1030
[n]	P. vom Stein, M. Peiniger, M. Pekeler, C. Piel, and H. Vogel, “RF Activities on Cavities and Turn Key Accelerator Systems at ACCEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH092, pp. 984-986. 
[n]	J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273. 
[n]	Y. Yin, “Measurement of Transverse Geometric Moments of the TRIUMF Beam with a Multistrip Monitor”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1658-1661. 
[n]	Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885. 
[n]	S. E. Sampayan, G. J. Caporaso, Y.-J. Chen, T. A. Decker, and W. C. Turner, “Energy Sweep Compensation of Induction Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU441, pp. 417-419. 
[n]	W. V. Hassenzahl, W. C. Armstrong, and J. D. Rogers, “The Effects of Radiation on Superconducting Nb-Ti Wire”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 683-685. 
[n]	J. Keane et al., “X-Ray RF System Upgrade at the NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 141-144. 
[n]	S. Persichelli et al., “Chromaticity Dependence of the Transverse Effective Impedance in the CERN Proton Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 395-398. doi:10.18429/JACoW-IPAC2015-MOPJE047
[n]	D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106. 
[n]	J. Wu et al., “X-ray Spectra and Peak Power Control with iSASE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB101, pp. 2068-2070. 
[n]	M. Solfaroli Camillocci et al., “Commissioning of the LHC Magnet Powering System in 2009”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB045, pp. 376-378. 
[n]	D. Liska, “Computer Design of UHF Power Amplifier Tubes”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 266-273. 
[n]	S. M. Chung, C. D. Park, C. K. Kim, M. Kwon, and I. S. Ko, “Performance of the PLS Storage Ring Vacuum System”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E103, pp. 277-279. 
[n]	J. S. Oh et al., “Compact X-ray Free Electron Laser Program at the PAL”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA101, pp. XX-XX. 
[n]	M. A. Allen et al., “RF Superconducting Materials Research at SLAC”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1009-1013. 
[n]	A. Santamar?¡a Garc?¡a et al., “Study of the Transverse Emittance Blow-Up Along the Proton Synchrotron Booster Cycle During Wire Scanner Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1110-1113. doi:10.18429/JACoW-IPAC2019-MOPTS101
[n]	H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1502-1505. 
[n]	H. Weisberg, E. Gill, P. Ingrassia, and E. Rodger, “An Ionization Profile Monitor for the Brookhaven AGS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2179-2182. 
[n]	R. Macek, L. Rybarcyk, R. McCrady, T. Zaugg, and J. Holmes, “Recent Studies of the Electron Cloud Induced Beam Instability at the Los Alamos PSR”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR00, pp. 1-5. 
[n]	T. Plettner et al., “Progress of the Laser Electron Accelerator Project at Stanford University”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC003, pp. 108-110. 
[n]	T. Capshew, J. C. Collins, D. DuPlantis, D. W. Frame, J. Graham, and D. D. Reid, “The IUCF High Intensity Polarized Ion Source Control System”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-02, pp. 641-643. 
[n]	R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721. 
[n]	R. H. Rheaume and R. T. Sanders, “The AGS Conversion Radio Frequency Power Amplifier”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 237-241. 
[n]	N. Pichoff et al., “Discussion on SARAF-LINAC Cryomodules”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 80-82. doi:10.18429/JACoW-HB2018-TUA2WC01
[n]	B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47. 
[n]	P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627. 
[n]	R. D. Porter, M. Liepe, J. T. Maniscalco, and R. A. Strauss, “Update on Sample Host Cavity Design Work for Measuring Flux Entry and Quench Field”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 851-853. doi:10.18429/JACoW-SRF2017-THPB044
[n]	R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1344-1347. 
[n]	H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1623-1626. 
[n]	R. Klein et al., “Absolute Measurement of the MLS Storage Ring Parameters”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC032, pp. 2055-2057. 
[n]	L. O. Dallin and M. S. de Jong, “Coherent Synchrotron Radiation Production at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP017, pp. 1126-1128. 
[n]	H. Padamsee, “TESLA Calculations Program”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F26, pp. XX-XX. 
[n]	C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995. 
[n]	A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-4, pp. 41-51. 
[n]	P.-A. Duperrex and U. Mueller, “On-line Calibration Schemes for RF-based Beam Diagnostics”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3C06, pp. 601-605. 
[n]	T. Fujino et al., “Promising Performance of the Nb/Cu Clad Seamless Superconducting RF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP002, pp. 372-375. 
[n]	E. V. Farinholt, Z. D. Farkas, and H. A. Hogg, “Microwave Beam Position Monitors at SLAC”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1127-1132. 
[n]	D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350. 
[n]	W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399. 
[n]	F. Ullmann, A. Schwan, U. Hagen, O. Heid, H. von Jagwitz, and G. Zschornack, “Shaping of Ion Pulses from an Electron Beam Ion Source for Particle Injection into Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS077, pp. 1716-1718. 
[n]	Y. Shiroyanagi, G. A. Greene, R. C. Gupta, and W. Sampson, “Influence of Proton Irradiation on Angular Dependence of Second Generation (2G) HTS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP171, pp. 1145-1147. 
[n]	K. Budal, “Measurement of Charge Emission from Targets as a Means of Burst Intensity and Beam Intensity Monitoring”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1132-1138. 
[n]	J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n]	R. Helm et al., “Recent Improvements in Luminosity at PEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2001-2004. 
[n]	P. Hartmann, J. Fuersch, D. Schirmer, T. Weis, and K. Wille, “Experience with Libera Beam Position Monitors at DELTA”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB21, pp. 111-113. 
[n]	G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345. 
[n]	M. S. Beck et al., “Studies of Transverse Instabilities in the CERN SPS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 291-295. doi:10.18429/JACoW-HB2018-WEP2PO011
[n]	H. Wiedemann, “The Slac-Linac-Collider (SLC)  Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2016-2020. 
[n]	Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1143-1151. 
[n]	E. Matias, H. Zhang, and M. S. de Jong, “Contribution of the CLS Control System to the CLS Accelerator System Reliability”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP108, pp. 603-605. 
[n]	G. Horlitz et al., “Performance of 1-m-Long/75-mm Bore Superconducting Prototype Coils for HERA”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3390-3393. 
[n]	C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731. 
[n]	M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412. 
[n]	J. Safranek, “Beam Dynamics in Wigglers:  Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1307-1310. 
[n]	R. M. Hutcheon et al., “Operation of a CW High Power RFQ Test Cavity: The CRNL ''Sparker''”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0010, pp. 74-76. 
[n]	A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662. 
[n]	S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724. 
[n]	A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107. 
[n]	R. J. Macek et al., “Electron Cloud Generation and Trapping in a Quadrupole Magnet at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODAB02, pp. 828-830. 
[n]	M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512. 
[n]	R. Kazimi, J. Fugitt, A. Krycuk, C. K. Sinclair, and L. Turlington, “Test of a New RF Separator Structure for CEBAF”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-70, pp. 244-246. 
[n]	S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2201-2204. 
[n]	J. C. Walker et al., “Mechanical Support and Transport System Used for the Neutrino Horn at Brookhaven National Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1737-1740. 
[n]	L. Zhao et al., “RF Power Test of the Rebuncher for Saraf-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2815-2817. doi:10.18429/JACoW-IPAC2019-WEPRB010

For LaTeX

Use Complete Form

For BibTeX

References

Back to search