Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Mahoney, O. Garza, E. Stitts, H. Areti, and M. O, “Jefferson Lab Personnel Safety Fast Beam Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P062, pp. 3681-3683.
[n] H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051.
[n] G. Dutto and M. K. Craddock, “Focusing in RF Accelerating Gaps with Asymmetrically Curved Electric Equipotentials”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-13, pp. 271-274.
[n] M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
[n] S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3155-3157. doi:10.18429/JACoW-IPAC2023-WEPL022
[n] N. P. Sobenin et al., “Stabilization of the Polarization Plane in Traveling Wave Deflectors”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA036, pp. 3759-3761.
[n] J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Progress in Optics Studies at FLASH”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1488-1491. doi:10.18429/JACoW-IPAC2015-TUPWA035
[n] A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
[n] A. V. Smirnov et al., “A Table-Top Alpha-Magnet”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3584-3586. doi:10.18429/JACoW-IPAC2015-WEPWI042
[n] N. Balal, V. Bratman, E. Magory, and A. Steiner, “Helical undulators assembled from magnetized ring sectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1588-1590. doi:10.18429/JACoW-IPAC2025-TUPS089
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
[n] C. Meng et al., “Step-Like Field Magnets to Uniform Beam Distribution and Experiment at CADS Injector-I”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 908-910. doi:10.18429/JACoW-IPAC2017-MOPVA025
[n] I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
[n] J. Zemella and M. Vogt, “Progress in FLASH Optics Consolidation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 211-214. doi:10.18429/JACoW-IPAC2017-MOPAB051
[n] S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 421-424. doi:10.18429/JACoW-NAPAC2016-TUPOA68
[n] S. Sadovich, A. Rossi, and G. Stancari, “Electron Beam Dynamics Simulation for Electron Lenses”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3220-3223. doi:10.18429/JACoW-IPAC2019-WEPTS048
[n] S. L. Snyder and F. Marti, “Study and Redesign of the NSCL K500 Central Region”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP10, pp. 375-377.
[n] S. MacLaren, D. Beck, A. Faltens, W. Ghiorso, E. Henestroza, and P. Seidl, “A High-Current Density Contact Ionization Source for Heavy-Ion Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA110, pp. 2849-2851.
[n] L. Liu and P. F. Tavares, “Orbit Stability at the Brazilian Synchrotron Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE041, pp. 2687-2689.
[n] N. Wang et al., “Impedance and Heat Load Analysis of the Stripline Kicker in HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3234-3236. doi:10.18429/JACoW-IPAC2018-THPAK015
[n] S. C. Childress, “NuMI Proton Beam Diagnostics and Control: Achieving 2 Megawatt Capability”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF12, pp. 475-478.
[n] C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
[n] M. Walter et al., “Beam Extraction Concepts and Design for the University of Maryland Electron Ring (UMER)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS048, pp. 1754-1756.
[n] N. Kamikubota et al., “Virtual IO Controllers at J-PARC MR using Xen”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU039, pp. 1165-1167.
[n] F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
[n] N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Mahoney, O. Garza, E. Stitts, H. Areti, and M. O, “Jefferson Lab Personnel Safety Fast Beam Kicker System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P062, pp. 3681-3683.
- H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2048-2051.
- G. Dutto and M. K. Craddock, “Focusing in RF Accelerating Gaps with Asymmetrically Curved Electric Equipotentials”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-13, pp. 271-274.
- M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
- S. Krecic, A. Carniel, and F. Tripaldi, “Emittance reduction of the actual Booster for Elettra2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL022, pp. 3155-3157.
- N. P. Sobenin et al., “Stabilization of the Polarization Plane in Traveling Wave Deflectors”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA036, pp. 3759-3761.
- J. Zemella, T. Hellert, M. Scholz, and M. Vogt, “Progress in Optics Studies at FLASH”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1488-1491.
- A. Valfells et al., “Initial Studies of Longitudinal Dynamics on UMER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG020, pp. 2312-2314.
- A. V. Smirnov et al., “A Table-Top Alpha-Magnet”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3584-3586.
- N. Balal, V. Bratman, E. Magory, and A. Steiner, “Helical undulators assembled from magnetized ring sectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS089, pp. 1588-1590.
- F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
- C. Meng et al., “Step-Like Field Magnets to Uniform Beam Distribution and Experiment at CADS Injector-I”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 908-910.
- I. P. S. Martin, R. Bartolini, R. T. Fielder, E. C. Longhi, and B. Singh, “Further Advances in Understanding and Optimising Beam Dynamics in the Diamond Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC025, pp. 3032-3034.
- J. Zemella and M. Vogt, “Progress in FLASH Optics Consolidation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 211-214.
- S. V. Kutsaev et al., “Design, Simulations and Experimental Demonstration of an Intra-Pulse Ramped-Energy Travelling Wave Linac for Cargo Inspection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 421-424.
- S. Sadovich, A. Rossi, and G. Stancari, “Electron Beam Dynamics Simulation for Electron Lenses”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3220-3223.
- S. L. Snyder and F. Marti, “Study and Redesign of the NSCL K500 Central Region”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP10, pp. 375-377.
- S. MacLaren, D. Beck, A. Faltens, W. Ghiorso, E. Henestroza, and P. Seidl, “A High-Current Density Contact Ionization Source for Heavy-Ion Fusion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA110, pp. 2849-2851.
- L. Liu and P. F. Tavares, “Orbit Stability at the Brazilian Synchrotron Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE041, pp. 2687-2689.
- N. Wang et al., “Impedance and Heat Load Analysis of the Stripline Kicker in HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3234-3236.
- S. C. Childress, “NuMI Proton Beam Diagnostics and Control: Achieving 2 Megawatt Capability”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF12, pp. 475-478.
- C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
- M. Walter et al., “Beam Extraction Concepts and Design for the University of Maryland Electron Ring (UMER)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS048, pp. 1754-1756.
- N. Kamikubota et al., “Virtual IO Controllers at J-PARC MR using Xen”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU039, pp. 1165-1167.
- F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX.
- N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
Back to search