Favourites
For Word
[n] V. L. Uvarov et al., “Producing Two-photon Planar Sources at an Electron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2192-2194. doi:10.18429/JACoW-IPAC2014-WEPRO098
[n] C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
[n] P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 659-662. doi:10.18429/JACoW-LINAC2024-THPB014
[n] P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
[n] V. L. Uvarov, A. N. Dovbnya, V. I. Nikiforov, and Z. V. Zhiglo, “Optimization of Electron Linac Operating Conditions for Photonuclear Isotope Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC106, pp. 1308-1310.
[n] D. Sertore, J. H. Han, P. Michelato, L. Monaco, C. Pagani, and S. Schreiber, “High QE Photocathode at FLASH”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS052, pp. 2496-2498.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966.
[n] V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
[n] L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
[n] H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
[n] Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
[n] R. L. Cassel et al., “The Prototype Solid State Induction Modulator for SLAC NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH033, pp. 3744-3746.
[n] A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
[n] S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n] F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3399-3403. doi:10.18429/JACoW-IPAC2019-THXXPLM2
[n] S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 907-909.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
[n] M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
[n] D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
[n] W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1573-1576.
[n] M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
[n] C. Yao, V. Sajaev, N. Sereno, and H. Shang, “Optimization of the Low-emittance Lattice of the APS Booster Synchrotron”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP057, pp. 690-692.
[n] H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n] S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
[n] K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
[n] Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
[n] V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
[n] C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
[n] B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
[n] M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
[n] R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
[n] R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
[n] B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
[n] J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 871-875. doi:10.18429/JACoW-SRF2019-THP017
[n] J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
For LaTeX
Use Complete Form
For BibTeX
References
- V. L. Uvarov et al., “Producing Two-photon Planar Sources at an Electron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2192-2194.
- C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
- P. Desire Valdor, A. Gerbershagen, and A. Latina, “Intrabeam scattering simulation with a novel hybrid-kinetic Monte Carlo method for linear accelerators”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 659-662.
- P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
- V. L. Uvarov, A. N. Dovbnya, V. I. Nikiforov, and Z. V. Zhiglo, “Optimization of Electron Linac Operating Conditions for Photonuclear Isotope Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC106, pp. 1308-1310.
- D. Sertore, J. H. Han, P. Michelato, L. Monaco, C. Pagani, and S. Schreiber, “High QE Photocathode at FLASH”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS052, pp. 2496-2498.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1963-1966.
- V. V. Mytrochenko, M. I. Ayzatskiy, V. A. Kushnir, A. Opanasenko, S. A. Perezhogin, and V. L. Uvarov, “Intra-Bunch Energy Spread of Electrons in Powerful RF Linacs for Nuclear Physics Research”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS040, pp. 691-693.
- L. E. Boon, A. F. Garfinkel, and K. C. Harkay, “Heat Load for the APS Superconducting Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC186, pp. 3332-3334.
- H. H. Li et al., “The Injection System of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC041, pp. 2076-2078.
- Y.-J. Chen and A. Paul, “Compact Proton Accelerator for Cancer Therapy”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS059, pp. 1787-1789.
- R. L. Cassel et al., “The Prototype Solid State Induction Modulator for SLAC NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH033, pp. 3744-3746.
- A. Hofmann, K. Hubner, and B. Zotter, “A Computer Code for the Calculation of Beam Stability in Circular Electron Machines”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3514-3517.
- S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1419-1421.
- F. M. Velotti et al., “Demonstration of Loss Reduction Using a Thin Bent Crystal to Shadow an Electrostatic Septum During Resonant Slow Extraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3399-3403.
- S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 907-909.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
- M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
- D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
- W. Bertram et al., “Vacuum Processing and Control on COSY Beam Lines”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1573-1576.
- M. Pont, E. Boter, and M. L. Lopes, “Magnets for the Storage Ring ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS080, pp. 2562-2564.
- C. Yao, V. Sajaev, N. Sereno, and H. Shang, “Optimization of the Low-emittance Lattice of the APS Booster Synchrotron”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP057, pp. 690-692.
- H. Li et al., “The Status of CSNS Front End”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 771-773.
- S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
- K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
- Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
- V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
- C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
- B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
- M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1886-1889.
- R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
- R. L. Lillestol, S. Doebert, M. Olvegaard, A. Rabiller, G. Sterbini, and E. Adli, “Experimental Verification of the CLIC Decelerator with theTest Beam Line in the CLIC Test Facility 3”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR031, pp. 1885-1887.
- B. R. Poole, D. T. Blackfield, and S. D. Nelson, “Particle Simulations of a Linear Proton Dielectric Wall Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS060, pp. 1790-1792.
- J. W. Angle, G. V. Eremeev, M. J. Kelley, U. Pudasaini, C. E. Reece, and J. Tuggle, “Crystallographic Characterization of Nb?Sn Coatings and N-Doped Niobium via EBSD and SIMS”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 871-875.
- J. A. Watson et al., “A Solid-State Modulator for High Speed Kickers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH031, pp. 3738-3740.
Back to search