Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
[n] R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] R. Wider?Âe, J. P. Blaser, G. Burton, B. Larsson, and K. E. Scheer, “Panel Session: Accelerators for Hospitals”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-01, pp. 403-407.
[n] T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
[n] V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
[n] J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
[n] J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
[n] Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4098-4100. doi:10.18429/JACoW-IPAC2016-THPOY007
[n] D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
[n] E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
[n] H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
[n] K. W. Shepard, M. Kedzie, J. R. Delayen, J. Mammosser, and C. Piller, “Prototype 350 MHz Niobium Spoke-loaded Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP123, pp. 955-956.
[n] J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
[n] L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
[n] M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
[n] B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1316-1318. doi:10.18429/JACoW-IPAC2014-TUPRO113
[n] R. Nussbaumer, D. Dale, H. Hui, J. Richards, and P. Levy, “The Laser Stabilization Controls for the ISAC Beam Polarizer”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP065, pp. XX-XX.
[n] X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
[n] F. Fer, “Theoretical Study of Beam Extraction by the Method of Curvilinear Coordinates”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E08, pp. XX-XX.
[n] G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
[n] L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
[n] R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2150-2153.
[n] M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_041.
[n] R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185.
[n] C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
- R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- R. Wider?Âe, J. P. Blaser, G. Burton, B. Larsson, and K. E. Scheer, “Panel Session: Accelerators for Hospitals”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-01, pp. 403-407.
- T. P. Wangler et al., “Linear Accelerator for Production of Tritium: Physics Design Challenges”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH102, pp. 548-552.
- V. S. Pronskikh, V. Kashikhin, and N. V. Mokhov, “Radiation and Thermal Analysis of Production Solenoid for Mu2e Experimental Setup”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP048, pp. 2208-2210.
- J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
- J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
- Y. B. Yan, G. H. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “Application of Embedded Linux Boards in SSRF and SXFEL Control System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4098-4100.
- D. E. Lobb, “Low Momentum Kaon Beam Lines”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2827-2830.
- E. Daly et al., “Improved Prototype Cryomodule for the CEBAF 12 GeV Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB077, pp. 1377-1379.
- H. L. Hagedoorn and N. F. Verster, “The Extraction of the Beam of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E09, pp. XX-XX.
- K. W. Shepard, M. Kedzie, J. R. Delayen, J. Mammosser, and C. Piller, “Prototype 350 MHz Niobium Spoke-loaded Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP123, pp. 955-956.
- J. F. Tooker et al., “Parameter Overview of SSC Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-11, pp. 323-325.
- L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
- M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475.
- B. J. A. Shepherd et al., “Design and Measurement of a Low-energy Tunable Permanent Magnet Quadrupole Prototype”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1316-1318.
- R. Nussbaumer, D. Dale, H. Hui, J. Richards, and P. Levy, “The Laser Stabilization Controls for the ISAC Beam Polarizer”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP065, pp. XX-XX.
- X. Cao and D. Proch, “Transient Heat Conduction Analysis in Superconducting Cavities”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F12, pp. XX-XX.
- F. Fer, “Theoretical Study of Beam Extraction by the Method of Curvilinear Coordinates”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E08, pp. XX-XX.
- G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
- L. Wang, G. J. Caporaso, and S. Sullivan, “Electromagnetic and Thermal Simulations for the Switch Region of a Compact Proton Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS061, pp. 1793-1795.
- R. Frankel, W. Buxton, K. Kohler, R. Warkentien, and A. White, “Relway": A Process Data Highway System Optimized for Accelerators"”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2150-2153.
- M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_041.
- R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 180-185.
- C. Pearson, A. Vlieks, G. Caryotakis, E. Jongewaard, R. M. Phillips, and D. Sprehn, “The Next Linear Collider Klystron Development Program”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA03, pp. 739-741.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
Back to search