Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Campo, P. Antonini, A. Calore, A. Lombardi, M. Maggiore, and L. Pranovi, “SPES Cyclotron Beamlines”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 53-56. doi:10.18429/JACoW-Cyclotrons2016-MOP04
[n] V. Fedosseev et al., “Integration of a Terawatt Laser at the CERN SPS Beam for the AWAKE Experiment on Proton-Driven Plasma Wake Acceleration”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2592-2595. doi:10.18429/JACoW-IPAC2016-WEPMY020
[n] F. J. M. Farley and C. Carli, “EULIMA Beam Delivery”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1796-1799.
[n] M. Sapinski, B. Dehning, A. Guerrero, J. Koopman, and E. M?®tral, “Carbon Fibre Damage in Accelerator Beam”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD40, pp. 390-392.
[n] W. Maciszewski and A. Wysocka, “The Photon Beam Characteristics of Linear Accelerator Equipped with Additional Narrow Beam Collimator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A19, pp. 2563-2568.
[n] T. Wilksen et al., “A Bunch-Synchronized Data Acquisition System for the European XFEL Accelerator”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 958-961. doi:10.18429/JACoW-ICALEPCS2017-TUPHA210
[n] P. Duval and V. Yarygin, “The Use of Wizards in Creating Control Applications”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP026, pp. XX-XX.
[n] T. Bass, G. K. Davis, C. Grenoble, and M. Stirbet, “Standardization of CEBAF 12 GeV Upgrade Cavity Testing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC088, pp. 2420-2422.
[n] M. C. L. Buzio et al., “Measurement and Scaling Laws of the Sextupolar Component in the LHC Dipole Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB018, pp. 316-318.
[n] J. D. Halbritter, “Degradation of Superconducting RF Cavity Performance by Extrinsic Properties”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP44, pp. 156-162.
[n] M. Montis, S. Fantinel, M. G. Giacchini, and M. A. Bellato, “New Data Archive System for SPES Project Based on EPICS RDB Archiver with PostgreSQL Backend”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO014, pp. 188-190.
[n] M. G. Giacchini, M. Contran, M. Montis, and M. A. Bellato, “Magnet Power Supply Control Mockup for the SPES Project”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO016, pp. 66-68.
[n] I. Terechkine et al., “CW Room Temperature Re-buncher for the PIP-II Linac Front End”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3914-3916. doi:10.18429/JACoW-IPAC2014-THPRI062
[n] J. G. Alessi et al., “AGS Preinjector Improvement”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 276-279.
[n] A. Perillo-Marcone et al., “Design of Air-cooled Beam Dump for Extraction Line of PS Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI062, pp. 3436-3438.
[n] N. Vinokurov et al., “Project of the Short Pulse Facility at KAERI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO32, pp. 287-289.
[n] J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 538-541.
[n] A. Burrill, G. K. Davis, C. E. Reece, A. V. Reilly, and M. Stirbet, “SRF Cavity Performance Overview for the 12 GeV Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC089, pp. 2423-2425.
[n] J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 999-1002.
[n] G. V. Romanov et al., “Perpendicular Biased Ferrite Tuned Cavities for the Fermilab Booster”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3911-3913. doi:10.18429/JACoW-IPAC2014-THPRI061
[n] W.-T. Weng et al., “Choice of Proton Driver Parameters for a Neutrino Factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH138, pp. 372-374.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Campo, P. Antonini, A. Calore, A. Lombardi, M. Maggiore, and L. Pranovi, “SPES Cyclotron Beamlines”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 53-56.
- V. Fedosseev et al., “Integration of a Terawatt Laser at the CERN SPS Beam for the AWAKE Experiment on Proton-Driven Plasma Wake Acceleration”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2592-2595.
- F. J. M. Farley and C. Carli, “EULIMA Beam Delivery”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1796-1799.
- M. Sapinski, B. Dehning, A. Guerrero, J. Koopman, and E. M?®tral, “Carbon Fibre Damage in Accelerator Beam”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD40, pp. 390-392.
- W. Maciszewski and A. Wysocka, “The Photon Beam Characteristics of Linear Accelerator Equipped with Additional Narrow Beam Collimator”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A19, pp. 2563-2568.
- T. Wilksen et al., “A Bunch-Synchronized Data Acquisition System for the European XFEL Accelerator”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 958-961.
- P. Duval and V. Yarygin, “The Use of Wizards in Creating Control Applications”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP026, pp. XX-XX.
- T. Bass, G. K. Davis, C. Grenoble, and M. Stirbet, “Standardization of CEBAF 12 GeV Upgrade Cavity Testing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC088, pp. 2420-2422.
- M. C. L. Buzio et al., “Measurement and Scaling Laws of the Sextupolar Component in the LHC Dipole Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB018, pp. 316-318.
- J. D. Halbritter, “Degradation of Superconducting RF Cavity Performance by Extrinsic Properties”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP44, pp. 156-162.
- M. Montis, S. Fantinel, M. G. Giacchini, and M. A. Bellato, “New Data Archive System for SPES Project Based on EPICS RDB Archiver with PostgreSQL Backend”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO014, pp. 188-190.
- M. G. Giacchini, M. Contran, M. Montis, and M. A. Bellato, “Magnet Power Supply Control Mockup for the SPES Project”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO016, pp. 66-68.
- I. Terechkine et al., “CW Room Temperature Re-buncher for the PIP-II Linac Front End”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3914-3916.
- J. G. Alessi et al., “AGS Preinjector Improvement”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 276-279.
- A. Perillo-Marcone et al., “Design of Air-cooled Beam Dump for Extraction Line of PS Booster”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI062, pp. 3436-3438.
- N. Vinokurov et al., “Project of the Short Pulse Facility at KAERI”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO32, pp. 287-289.
- J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 538-541.
- A. Burrill, G. K. Davis, C. E. Reece, A. V. Reilly, and M. Stirbet, “SRF Cavity Performance Overview for the 12 GeV Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC089, pp. 2423-2425.
- J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 999-1002.
- G. V. Romanov et al., “Perpendicular Biased Ferrite Tuned Cavities for the Fermilab Booster”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3911-3913.
- W.-T. Weng et al., “Choice of Proton Driver Parameters for a Neutrino Factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH138, pp. 372-374.
Back to search
