Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Schnell, “Linear Collider Studies in Europe”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 285-290.
[n] M. A. Green et al., “Progress on the Cryogenic and Current Tests of the MSU Cyclotron Gas Stopper Superconducting Magnet”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3415-3418. doi:10.18429/JACoW-IPAC2015-WEPTY061
[n] S. P. M?©ller et al., “Status of the Particle Therapy Accelerator System Built by DANFYSIK A/S”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP124, pp. 1815-1817.
[n] H. Safa, Y. Boudigou, E. Jacques, J. Klein, S. Jaidane, and M. Bolore, “RRR Mapping of SRF Cavities by a Magnetometric Method”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D08, pp. 864-872.
[n] M. J. Boland, R. T. Dowd, G. LeBlanc, M. J. Spencer, Y. E. Tan, and A. Walsh, “X-ray and Optical Diagnostic Beamlines at the Australian Synchrotron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS002, pp. 3263-3265.
[n] J. Galambos, “High Power Proton Beam Targets: Technological Evolution, Current Challenges, and the Future”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1075-1079. doi:10.18429/JACoW-IPAC2016-TUZB01
[n] D. Wolff, C. Briegel, J. Dinkel, and H. Pfeffer, “Improving Regulation in the Fermilab Main Ring Magnet Power Supply System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3088-3091.
[n] K. T. Hsu, H. H. Hu, C. H. Kuo, C. C. Kuo, K. K. Lin, and T. S. Ueng, “Experimental Study of Tune Variation at the Storage Ring of SRRC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A09, pp. 1501-1503.
[n] M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
[n] T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
[n] A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
[n] C. S. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Top-Up Mode Operation at SRRC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B20, pp. 1874-1876.
[n] A. M. Tremaine et al., “Inverse Free Electron Laser Accelerators for Driving Compact Light Sources and Detection Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBN2, pp. 1-3.
[n] D. Nicklaus, “Java-based Open Access Front Ends in the Fermilab Controls System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE613, pp. XX-XX.
[n] G. Voronin, V. Kovalchuk, A. Solnyshkov, and M. Svinin, “Development of the Intense Neutron Generator SNEG-13”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2678-2681.
[n] S. Schwarz et al., “Offline Tests with the NSCL Cyclotron Gas Stopper”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 121-125. doi:10.18429/JACoW-Cyclotrons2016-TUA01
[n] G. C. Harper and D. W. Storm, “A Beat Frequency Buncher”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A29, pp. 261-264.
[n] W. Schnell, “Report on the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1358-1363.
[n] G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
[n] D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
[n] R. Jones et al., “Real Time Display of the Vertical Beam Sizes in LEP Using the BEXE X-Ray Detector and Fast VME Based Computers”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT10, pp. XX-XX.
[n] J. P. Penicaud, “Design and Magnetic Measurements of the New Magnets for the Saclay Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1346-1349.
[n] Y. Zhu, S. Hulbert, M. Idir, I. Jarrige, S. O, and E. Vescovo, “Engineering Design and Commissioning Performance of the ESM and Six Soft X-Ray Beamlines at NSLS-II”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 435-439. doi:10.18429/JACoW-MEDSI2018-FROAMA05
[n] C. C. Kuo, Y. K. Lin, K. K. Lin, and G. H. Luo, “Development of a Machine Status Program ?History? and its Application to Beam Stability Analysis”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B07, pp. 648-650.
[n] J. Kamiya et al., “In-situ Degassing of the Ferrite Cores in the Extraction Kicker Magnets of the J-PARC 3-GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI015, pp. 3324-3326.
[n] J. Dinkel and J. Biggs, “A Precision Pulser for Main Ring Extraction”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3760-3763.
[n] M. Jaworski, S. Szustkowski, and D. Moir, “Emittance growth and transport of an intense relativistic electron beam after foil scattering”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC08, unpublished.
[n] A. Boudzko, L. Jensen, R. Jones, S. Koscielniak, and H. Schmickler, “SPS and LHC Tune Control Studies using the Fast Map Tool”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP19F, pp. 1168-1170.
[n] J. Kulesza, K. I. Blomqvist, A. Deyhim, C. Glover, E. A. Johnson, and D. J. Waterman, “Development of a 100 mm Period Hybrid Wiggler for the Australian Synchrotron Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS024, pp. 1233-1235.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Schnell, “Linear Collider Studies in Europe”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 285-290.
- M. A. Green et al., “Progress on the Cryogenic and Current Tests of the MSU Cyclotron Gas Stopper Superconducting Magnet”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3415-3418.
- S. P. M?©ller et al., “Status of the Particle Therapy Accelerator System Built by DANFYSIK A/S”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP124, pp. 1815-1817.
- H. Safa, Y. Boudigou, E. Jacques, J. Klein, S. Jaidane, and M. Bolore, “RRR Mapping of SRF Cavities by a Magnetometric Method”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D08, pp. 864-872.
- M. J. Boland, R. T. Dowd, G. LeBlanc, M. J. Spencer, Y. E. Tan, and A. Walsh, “X-ray and Optical Diagnostic Beamlines at the Australian Synchrotron Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS002, pp. 3263-3265.
- J. Galambos, “High Power Proton Beam Targets: Technological Evolution, Current Challenges, and the Future”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1075-1079.
- D. Wolff, C. Briegel, J. Dinkel, and H. Pfeffer, “Improving Regulation in the Fermilab Main Ring Magnet Power Supply System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3088-3091.
- K. T. Hsu, H. H. Hu, C. H. Kuo, C. C. Kuo, K. K. Lin, and T. S. Ueng, “Experimental Study of Tune Variation at the Storage Ring of SRRC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A09, pp. 1501-1503.
- M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
- T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
- A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
- C. S. Chen, K. T. Hsu, K. K. Lin, and T. S. Ueng, “Top-Up Mode Operation at SRRC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B20, pp. 1874-1876.
- A. M. Tremaine et al., “Inverse Free Electron Laser Accelerators for Driving Compact Light Sources and Detection Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBN2, pp. 1-3.
- D. Nicklaus, “Java-based Open Access Front Ends in the Fermilab Controls System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE613, pp. XX-XX.
- G. Voronin, V. Kovalchuk, A. Solnyshkov, and M. Svinin, “Development of the Intense Neutron Generator SNEG-13”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2678-2681.
- S. Schwarz et al., “Offline Tests with the NSCL Cyclotron Gas Stopper”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 121-125.
- G. C. Harper and D. W. Storm, “A Beat Frequency Buncher”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A29, pp. 261-264.
- W. Schnell, “Report on the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1358-1363.
- G. Gisler and R. Faehl, “Self-Trapping Electron Ring Accelerators”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3204-3206.
- D. W. Storm et al., “Operation Status of the Nevis Synchrocyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1634-1637.
- R. Jones et al., “Real Time Display of the Vertical Beam Sizes in LEP Using the BEXE X-Ray Detector and Fast VME Based Computers”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT10, pp. XX-XX.
- J. P. Penicaud, “Design and Magnetic Measurements of the New Magnets for the Saclay Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1346-1349.
- Y. Zhu, S. Hulbert, M. Idir, I. Jarrige, S. O, and E. Vescovo, “Engineering Design and Commissioning Performance of the ESM and Six Soft X-Ray Beamlines at NSLS-II”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 435-439.
- C. C. Kuo, Y. K. Lin, K. K. Lin, and G. H. Luo, “Development of a Machine Status Program ?History? and its Application to Beam Stability Analysis”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B07, pp. 648-650.
- J. Kamiya et al., “In-situ Degassing of the Ferrite Cores in the Extraction Kicker Magnets of the J-PARC 3-GeV RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI015, pp. 3324-3326.
- J. Dinkel and J. Biggs, “A Precision Pulser for Main Ring Extraction”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3760-3763.
- M. Jaworski, S. Szustkowski, and D. Moir, “Emittance growth and transport of an intense relativistic electron beam after foil scattering”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC08, unpublished.
- A. Boudzko, L. Jensen, R. Jones, S. Koscielniak, and H. Schmickler, “SPS and LHC Tune Control Studies using the Fast Map Tool”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP19F, pp. 1168-1170.
- J. Kulesza, K. I. Blomqvist, A. Deyhim, C. Glover, E. A. Johnson, and D. J. Waterman, “Development of a 100 mm Period Hybrid Wiggler for the Australian Synchrotron Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS024, pp. 1233-1235.
Back to search