Favourites
For Word
[n] M. Cornacchia, J. W. Humphrey, J. Niederer, and J. H. Poole, “The Isabelle Accelerator Software, Control System and Beam Diagnostic Philosophy”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2264-2267.
[n] R. Hanft et al., “Magnetic Field Properties of Fermilab Energy Saver Dipoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3381-3384.
[n] R. Li, “Radial Eigenmodes for a Toroidal Waveguide with Rectangular Cross Section”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR095, pp. 3159-3161.
[n] P. Bauer et al., “Recent RRR measurements on Niobium for Superconducting RF Cavities at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP47, pp. 352-354.
[n] G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4243-4247. doi:10.18429/JACoW-IPAC2016-FRXAA01
[n] B. K. Sahu et al., “Phase Locking of Superconducting Quarter Wave Resonator by Piezoelectric Actuator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC013, pp. 2920-2922.
[n] M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391.
[n] P. Faugeras, A. Faugier, J. Gareyte, and A. Hilaire, “Second Order Effects in the Sextupole-Corrected SPS Lattice”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3577-3580.
[n] N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
[n] S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
[n] D. Gassner et al., “Design Status of the Electron-Ion Collider Beam Instrumentation”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL053, unpublished.
[n] C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3486-3489. doi:10.18429/JACoW-IPAC2023-WEPL157
[n] G. A. Decker and B. C. Craft, “Optimization of Compact Synchrotron Optics for X-Ray Lithography”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 464-467.
[n] M. Yoon, R. T. Kouzes, A. B. McDonald, W. H. Moore, and S. Oh, “A Measurement of the Beam Phase at the Princeton University AVF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1218-1221.
[n] J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
[n] S. Watson, M. Levi, and J. Nash, “Precision Measurements of the SLC Reference Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1547-1550.
[n] D. Zangrando et al., “The Elettra 3.5 T Superconducting Wiggler Refurbishment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2687-2689. doi:10.18429/JACoW-IPAC2014-WEPRI085
[n] I. V. Drebot, Yu. N. Grigor, and A. Y. Zelinsky, “Comparative Analysis of Compton Scattering Cross Section Derived with Classical Electrodynamics and with use of Quantum Approach”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA061, pp. 2627-2629.
[n] S. M. Alzubaidi, O. Meusel, U. Ratzinger, K. Volk, C. Wagner, and H. Dinter, “A Control System for the FRANZ Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3134-3136. doi:10.18429/JACoW-IPAC2014-THPRO103
[n] M. T. Maier et al., “Status of the Linac-commissioning for the Heavy Ion Cancer Therapy Facility HIT”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS036, pp. 1571-1573.
[n] L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 540-543.
[n] J. Y. Liu et al., “Coherent Harmonic Generation Experiment on Hefei Synchrotron Radiation Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB072, pp. 968-970.
[n] K. C. Harkay et al., “APS Superconducting Undulator Beam Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAA3, pp. 703-705.
[n] N. Minafra, “Beam Impedance Optimization of the TOTEM Roman Pots”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 452-454. doi:10.18429/JACoW-IPAC2015-MOPJE064
[n] P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
[n] S. O. Schriber, “Preliminary Design Study of a 60 MeV CW Electron Accelerator Using a Conventional Standing Wave Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB12, pp. 405-408.
[n] K. J. Suthar et al., “Investigation of Various Fabrication Methods to Produce a 180GHz Corrugated Waveguide Structure in 2mm Diameter ?¡0.5m ?¡Long Copper Tube for the Compact Wakefield Accelerator for FEL Facility”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 286-289. doi:10.18429/JACoW-NAPAC2019-MOPLO23
[n] R. Michnoff et al., “Beam Instrumentation Hardware Architecture for Upgrades at the BNL Collider-Accelerator Complex and the Future Electron Ion Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL058, unpublished.
[n] S. Kahn, M. A. Cummings, A. Dudas, R. Johnson, M. Neubauer, and M. Popovic, “Magnet system for a 1.497 GHz injection-locked magnetron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3608-3610. doi:10.18429/JACoW-IPAC2023-WEPM019
[n] R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
[n] C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 795-797. doi:10.18429/JACoW-IPAC2015-MOPHA009
[n] I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
[n] D. Nelson, “High Precision Electron Beam Diagnostic System for High Current Long Pulse Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA160, pp. 2235-2237.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Cornacchia, J. W. Humphrey, J. Niederer, and J. H. Poole, “The Isabelle Accelerator Software, Control System and Beam Diagnostic Philosophy”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2264-2267.
- R. Hanft et al., “Magnetic Field Properties of Fermilab Energy Saver Dipoles”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3381-3384.
- R. Li, “Radial Eigenmodes for a Toroidal Waveguide with Rectangular Cross Section”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR095, pp. 3159-3161.
- P. Bauer et al., “Recent RRR measurements on Niobium for Superconducting RF Cavities at Fermilab”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP47, pp. 352-354.
- G. B. Kim et al., “Korea Heavy Ion Medical Accelerator Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4243-4247.
- B. K. Sahu et al., “Phase Locking of Superconducting Quarter Wave Resonator by Piezoelectric Actuator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC013, pp. 2920-2922.
- M. Petrichenkov et al., “The Project of Accelerator Mass-Spectrometer at BINP”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF052, pp. 2389-2391.
- P. Faugeras, A. Faugier, J. Gareyte, and A. Hilaire, “Second Order Effects in the Sextupole-Corrected SPS Lattice”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3577-3580.
- N. Toge et al., “Recent Commissioning Experience on the SLC Arcs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1844-1847.
- S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842.
- D. Gassner et al., “Design Status of the Electron-Ion Collider Beam Instrumentation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL053, unpublished.
- C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL157, pp. 3486-3489.
- G. A. Decker and B. C. Craft, “Optimization of Compact Synchrotron Optics for X-Ray Lithography”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 464-467.
- M. Yoon, R. T. Kouzes, A. B. McDonald, W. H. Moore, and S. Oh, “A Measurement of the Beam Phase at the Princeton University AVF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1218-1221.
- J. Spanggaard, P. Carriere, S. C. Duarte Pinto, and G. Tranquille, “GEM Detectors for the Transverse Profile Measurement of Low Energy Antiprotons and High Energy Hadrons”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA036, pp. 747-749.
- S. Watson, M. Levi, and J. Nash, “Precision Measurements of the SLC Reference Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1547-1550.
- D. Zangrando et al., “The Elettra 3.5 T Superconducting Wiggler Refurbishment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2687-2689.
- I. V. Drebot, Yu. N. Grigor, and A. Y. Zelinsky, “Comparative Analysis of Compton Scattering Cross Section Derived with Classical Electrodynamics and with use of Quantum Approach”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA061, pp. 2627-2629.
- S. M. Alzubaidi, O. Meusel, U. Ratzinger, K. Volk, C. Wagner, and H. Dinter, “A Control System for the FRANZ Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3134-3136.
- M. T. Maier et al., “Status of the Linac-commissioning for the Heavy Ion Cancer Therapy Facility HIT”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS036, pp. 1571-1573.
- L. L. Reginato and B. H. Smith, “Application of the Two-Power-Supply Method to the Ferrite Bias of an RF Resonator of a Rapid-Cycling Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 540-543.
- J. Y. Liu et al., “Coherent Harmonic Generation Experiment on Hefei Synchrotron Radiation Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB072, pp. 968-970.
- K. C. Harkay et al., “APS Superconducting Undulator Beam Commissioning Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAA3, pp. 703-705.
- N. Minafra, “Beam Impedance Optimization of the TOTEM Roman Pots”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 452-454.
- P. H. Amos, P. Hamadyk, M. T. Heron, H. S. Shiers, and S. C. Lay, “The Selection, Development and Application of PLC Solutions for the Diamond Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB42, pp. 256-258.
- S. O. Schriber, “Preliminary Design Study of a 60 MeV CW Electron Accelerator Using a Conventional Standing Wave Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB12, pp. 405-408.
- K. J. Suthar et al., “Investigation of Various Fabrication Methods to Produce a 180GHz Corrugated Waveguide Structure in 2mm Diameter ?¡0.5m ?¡Long Copper Tube for the Compact Wakefield Accelerator for FEL Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 286-289.
- R. Michnoff et al., “Beam Instrumentation Hardware Architecture for Upgrades at the BNL Collider-Accelerator Complex and the Future Electron Ion Collider”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL058, unpublished.
- S. Kahn, M. A. Cummings, A. Dudas, R. Johnson, M. Neubauer, and M. Popovic, “Magnet system for a 1.497 GHz injection-locked magnetron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM019, pp. 3608-3610.
- R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
- C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 795-797.
- I. G. Gonin, J. F. DeFord, B. Held, and N. Solyak, “Multipactor Simulations in Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN093, pp. 2248-2250.
- D. Nelson, “High Precision Electron Beam Diagnostic System for High Current Long Pulse Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA160, pp. 2235-2237.
Back to search