Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 466-468. doi:10.18429/JACoW-FEL2019-WEP058
[n] T. Adachi et al., “Phase Space Painting Of Charge Exchange Injection in the KEK Booster”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP24C, pp. 2137-2139.
[n] G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX.
[n] W. P. Lutter, F. Schild, H. M. Thimmel, and P. Wucherer, “Beam Matching Problems Concerning the Axial Injection System for the Karlsruhe Cyclotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 321-326.
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] Y. P. Sun, “Synchrotron Accumulation on Off-Energy Closed-Orbit with Anti-Septum or Nonlinear Kicker”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1280-1282. doi:10.18429/JACoW-IPAC2018-TUPMF014
[n] V. Kumar and K.-J. Kim, “Optimization of Parameters of Smith-Purcell BWO”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH014, pp. 67-70.
[n] G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
[n] W. Lawson et al., “Design of Three-Cavity Coaxial Gyroklystron Circuits for Linear Collider Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ19, pp. 1566-1568.
[n] M. M. Holland and J. Shill, “Radiation Resistant Magnet Coils from Hard Anodized Aluminum Conductor”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 708-713.
[n] R. Boni, V. Chimenti, P. Fernandes, R. Parodi, B. Spataro, and F. Tazzioli, “Reduction of Multipacting in an Accelerator Cavity”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2815-2818.
[n] M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 611-614. doi:10.18429/JACoW-IPAC2017-MOPIK045
[n] A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 600-602. doi:10.18429/JACoW-RUPAC2016-THPSC027
[n] E. Merle et al., “Installation of the AIRIX Induction Accelerator”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4002, pp. 391-393.
[n] T. L. Hart and D. J. Summers, “An Inverse Cyclotron for Muon Cooling”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO3PB01, pp. 97-101.
[n] M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
[n] B. Gikal et al., “Dedicated DC-110 Heavy Ion Cyclotron for Industrial Production of Track Membranes”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA09, pp. 146-148.
[n] M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
[n] Ph. Eyharts et al., “Status of the AIRIX Induction Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE09, pp. 1210-1212.
[n] T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
[n] M. P. Level, P. C. Marin, M. Sommer, and H. Zyngier, “Collective Effects on Super-ACO”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 776-779.
[n] C.-S. Hwang et al., “Superconducting Insertion Devices for Synchrotron Hard X-ray at SRRC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE037, pp. 2613-2615.
[n] E. Fischer, H. G. Khodzhibagiyan, A. D. Kovalenko, R. V. Kurnyshov, G. Moritz, and P. A. Shcherbakov, “Analysis of the Superferric Quadrupole Magnet Design for the SIS100 Accelerator of the FAIR Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS091, pp. 2586-2588.
[n] R. H. Schuch, “Excitation and Recombination Studies with Astrophysically Relevant Ions at S-EBIT”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR2WH02, unpublished.
[n] M. C. Lampel, J. M. J. Madey, and R. J. Burke, “First Order Design Study of an Accelerator Beamline for the PEARL FEL”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4015, pp. 797-799.
[n] M. F. Farioli et al., “CNAO Resonance Sextupole Magnet Power Converters”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS126, pp. 2670-2672.
[n] D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
[n] R. C. Cohen et al., “Status of the Nevis Synchro-Cyclotron (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-06, pp. 57-61.
[n] C. Mitchell, M. Venturini, and R. Ryne, “Symplectic modeling of ALS-U bending dipoles using 3D magnetic field data”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 733-735. doi:10.18429/JACoW-IPAC2024-MOPS15
[n] A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4740-4743. doi:10.18429/JACoW-IPAC2017-THPVA124
[n] E. Prebys, C. M. Ankenbrandt, A. I. Drozhdin, C. Johnstone, and N. V. Mokhov, “AC Dipole System for Inter-Bunch Beam Extinction in the Mu2e Beam Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP033, pp. 1611-1613.
[n] G. A. Filatov et al., “Beam Lines and Stations for Applied Research Based on Ion Beams Extracted from Nuclotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3096-3098. doi:10.18429/JACoW-IPAC2022-THPOMS054
[n] B. Balhan, C. Baud, C. C. M. Borburgh, and M. Hourican, “Design and Construction of the CERN PS Booster Charge Exchange Injection Chicane Bumpers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2575-2577. doi:10.18429/JACoW-IPAC2018-WEPMF082
[n] D. C. Wutte et al., “A Multicusp Ion Source for Radioactive Ion Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W030, pp. 2770-2772.
[n] A. W. Davidson et al., “Self and Ionization-Injection in LWFA for Near Term Lasers”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC39, pp. 150-152.
[n] R. L. Fleming et al., “Focusing Studies of an Electron Beam in Diamond Field Emitter Array Cathodes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 217-219. doi:10.18429/JACoW-NAPAC2019-MOPLH22
[n] C.-H. Dustmann, H. Krauth, L. Steinbock, and W. Zernial, “Recent Experiments on ERA in Karlsruhe”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 283-286.
[n] V. L. Allan, G. Brajnik, and L. R. Brederode, “Using BDD Testing in SKAO: Challenges and Opportunities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 183-190. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO01
For LaTeX
Use Complete Form
For BibTeX
References
- X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 466-468.
- T. Adachi et al., “Phase Space Painting Of Charge Exchange Injection in the KEK Booster”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP24C, pp. 2137-2139.
- G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX.
- W. P. Lutter, F. Schild, H. M. Thimmel, and P. Wucherer, “Beam Matching Problems Concerning the Axial Injection System for the Karlsruhe Cyclotron”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 321-326.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- Y. P. Sun, “Synchrotron Accumulation on Off-Energy Closed-Orbit with Anti-Septum or Nonlinear Kicker”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1280-1282.
- V. Kumar and K.-J. Kim, “Optimization of Parameters of Smith-Purcell BWO”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH014, pp. 67-70.
- G. Olry et al., “Spiral2 Cryomodules B Tests Results”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP010, pp. 95-99.
- W. Lawson et al., “Design of Three-Cavity Coaxial Gyroklystron Circuits for Linear Collider Applications”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ19, pp. 1566-1568.
- M. M. Holland and J. Shill, “Radiation Resistant Magnet Coils from Hard Anodized Aluminum Conductor”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 708-713.
- R. Boni, V. Chimenti, P. Fernandes, R. Parodi, B. Spataro, and F. Tazzioli, “Reduction of Multipacting in an Accelerator Cavity”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2815-2818.
- M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 611-614.
- A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 600-602.
- E. Merle et al., “Installation of the AIRIX Induction Accelerator”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4002, pp. 391-393.
- T. L. Hart and D. J. Summers, “An Inverse Cyclotron for Muon Cooling”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO3PB01, pp. 97-101.
- M. Steigerwald et al., “The New Polarized Beam Injection at MAMI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP02E, pp. 1430-1432.
- B. Gikal et al., “Dedicated DC-110 Heavy Ion Cyclotron for Industrial Production of Track Membranes”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA09, pp. 146-148.
- M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
- Ph. Eyharts et al., “Status of the AIRIX Induction Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE09, pp. 1210-1212.
- T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
- M. P. Level, P. C. Marin, M. Sommer, and H. Zyngier, “Collective Effects on Super-ACO”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 776-779.
- C.-S. Hwang et al., “Superconducting Insertion Devices for Synchrotron Hard X-ray at SRRC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE037, pp. 2613-2615.
- E. Fischer, H. G. Khodzhibagiyan, A. D. Kovalenko, R. V. Kurnyshov, G. Moritz, and P. A. Shcherbakov, “Analysis of the Superferric Quadrupole Magnet Design for the SIS100 Accelerator of the FAIR Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS091, pp. 2586-2588.
- R. H. Schuch, “Excitation and Recombination Studies with Astrophysically Relevant Ions at S-EBIT”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR2WH02, unpublished.
- M. C. Lampel, J. M. J. Madey, and R. J. Burke, “First Order Design Study of an Accelerator Beamline for the PEARL FEL”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4015, pp. 797-799.
- M. F. Farioli et al., “CNAO Resonance Sextupole Magnet Power Converters”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS126, pp. 2670-2672.
- D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
- R. C. Cohen et al., “Status of the Nevis Synchro-Cyclotron (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-06, pp. 57-61.
- C. Mitchell, M. Venturini, and R. Ryne, “Symplectic modeling of ALS-U bending dipoles using 3D magnetic field data”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS15, pp. 733-735.
- A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4740-4743.
- E. Prebys, C. M. Ankenbrandt, A. I. Drozhdin, C. Johnstone, and N. V. Mokhov, “AC Dipole System for Inter-Bunch Beam Extinction in the Mu2e Beam Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP033, pp. 1611-1613.
- G. A. Filatov et al., “Beam Lines and Stations for Applied Research Based on Ion Beams Extracted from Nuclotron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3096-3098.
- B. Balhan, C. Baud, C. C. M. Borburgh, and M. Hourican, “Design and Construction of the CERN PS Booster Charge Exchange Injection Chicane Bumpers”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2575-2577.
- D. C. Wutte et al., “A Multicusp Ion Source for Radioactive Ion Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W030, pp. 2770-2772.
- A. W. Davidson et al., “Self and Ionization-Injection in LWFA for Near Term Lasers”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC39, pp. 150-152.
- R. L. Fleming et al., “Focusing Studies of an Electron Beam in Diamond Field Emitter Array Cathodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 217-219.
- C.-H. Dustmann, H. Krauth, L. Steinbock, and W. Zernial, “Recent Experiments on ERA in Karlsruhe”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 283-286.
- V. L. Allan, G. Brajnik, and L. R. Brederode, “Using BDD Testing in SKAO: Challenges and Opportunities”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4BCO01, pp. 183-190.
Back to search