Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Horodek et al., “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC044, pp. 532-534.
[n] K. Koba et al., “Longitudinal Impedance Tuner Using High Permeability Material”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D026, pp. 450-452.
[n] M. S. Jaski et al., “An Electromagnetic Variably Polarizing Quasi-Periodic Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM09, pp. 1064-1066.
[n] X. He, S. Q. Liao, J. Long, J. Shi, W. Wang, and L. Yang, “Design of a High Dose Rate Micro-Focused X-Ray Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1346-1348. doi:10.18429/JACoW-IPAC2018-TUPMF042
[n] E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1653-1656.
[n] C. Bungau, R. J. Barlow, A. Bungau, and R. Cywinski, “Neutron Spallation Studies for an Accelerator Driven Subcritical Reactor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP029, pp. 1351-1353.
[n] M. Abliz, C. L. Doose, Y. Ivanyushenkov, and I. Vasserman, “Temperature-Dependent Calibration of Hall Probes at Cryogenic Temperature”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP219, pp. 1223-1225.
[n] Y. Ishi et al., “Synchrotron Design Issues of the Japanese Hadron Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP068G, pp. 569-571.
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n] Y. Yang et al., “Open XAL Development for Xi'an Proton Application Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4010-4013. doi:10.18429/JACoW-IPAC2017-THPAB122
[n] H.-S. Kang, J. H. Han, T.-H. Kang, and I. S. Ko, “Beam Optics Design for PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD34, pp. 309-312.
[n] R. J. Barlow and A. M. Toader, “Computation of Resistive Wakefields for Collimators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP084, pp. 3401-3403.
[n] L. Calabretta, M. M. Maggiore, D. Rifuggiato, A. Calanna, and L. A. C. Piazza, “A Multi Megawatt Ring Cyclotron to Search for CP Violation in the Neutrino Sector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP232, pp. 1924-1926.
[n] H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
[n] P. Gladkikh and A. Y. Zelinsky, “New Abilities of Computer Code DeCA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT140, pp. 2164-2166.
[n] O. Bezditko, I. I. Karnaukhov, and A. Y. Zelinsky, “Survey and Alignment System of 100 MeV/100 kW Electron Linear Accelerator”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 87-89. doi:10.18429/JACoW-LINAC2018-MOPO028
[n] A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
[n] S. H. Kim, Y. J. Han, J. Y. Huang, S.-C. Kim, S. H. Nam, and S. S. Park, “Energy Stabilization of 2.5 GeV Linac using DeQing”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA063, pp. 717-719.
[n] R. P. Walker, “Progress with the Design of the UK's New Light Source Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE055, pp. 2269-2271.
[n] G. Gatti, A. M. Cook, J. B. Rosenzweig, and R. Tikhoplav, “Coherent Cherenkov Radiation as a Temporal Diagnostic for Microbunched Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN038, pp. 998-1000.
[n] G. D'Agostino, L. Calabretta, W. J. G. M, and D. Rifuggiato, “A CENTRAL REGION UPGRADE OF THE k800 SUPERCONDUCTING CYCLOTRON AT INFN-LNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1975-1978. doi:10.18429/JACoW-IPAC2019-TUPTS023
[n] E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2345-2348.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
[n] T. Kimura, “Development of the New Spill Control Device for J-PARC MR”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 192-194. doi:10.18429/JACoW-PCaPAC2018-THP14
[n] Q. Z. Xing et al., “Development Progress of the H+/H- Linear Accelerators at Tsinghua University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 732-734. doi:10.18429/JACoW-LINAC2018-THPO022
[n] N. Hubert, L. Cassinari, J.-C. Denard, A. Nadji, L. S. N. Nadolski, and D. Pedeau, “Design of a Fast Orbit Feedback for SOLEIL”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT019, pp. XX-XX.
[n] V. Sajaev, G. Decker, and L. Emery, “Various Canting Schemes for Utilizing More Than One Insertion Device in an Insertion Device Straight Section”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO08, pp. 252-254.
[n] M. Ferrario, M. Boscolo, L. Picardi, C. Ronsivalle, and L. Serafini, “Beam Dynamics Study of an RF Bunch Compressor for High Brightness Beam Injectors”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI056, pp. 1762-1764.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Horodek et al., “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC044, pp. 532-534.
- K. Koba et al., “Longitudinal Impedance Tuner Using High Permeability Material”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D026, pp. 450-452.
- M. S. Jaski et al., “An Electromagnetic Variably Polarizing Quasi-Periodic Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM09, pp. 1064-1066.
- X. He, S. Q. Liao, J. Long, J. Shi, W. Wang, and L. Yang, “Design of a High Dose Rate Micro-Focused X-Ray Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1346-1348.
- E. Mahner, R. Heiderhoff, N. Minatti, and H. Piel, “Enhanced Field Emmission of Niobium Single Crystals”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1653-1656.
- C. Bungau, R. J. Barlow, A. Bungau, and R. Cywinski, “Neutron Spallation Studies for an Accelerator Driven Subcritical Reactor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP029, pp. 1351-1353.
- M. Abliz, C. L. Doose, Y. Ivanyushenkov, and I. Vasserman, “Temperature-Dependent Calibration of Hall Probes at Cryogenic Temperature”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP219, pp. 1223-1225.
- Y. Ishi et al., “Synchrotron Design Issues of the Japanese Hadron Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP068G, pp. 569-571.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4383-4385.
- Y. Yang et al., “Open XAL Development for Xi'an Proton Application Facility”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4010-4013.
- H.-S. Kang, J. H. Han, T.-H. Kang, and I. S. Ko, “Beam Optics Design for PAL-XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD34, pp. 309-312.
- R. J. Barlow and A. M. Toader, “Computation of Resistive Wakefields for Collimators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP084, pp. 3401-3403.
- L. Calabretta, M. M. Maggiore, D. Rifuggiato, A. Calanna, and L. A. C. Piazza, “A Multi Megawatt Ring Cyclotron to Search for CP Violation in the Neutrino Sector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP232, pp. 1924-1926.
- H. Nakayama et al., “A Measurement System Using GP-IB for a Magnetic Core Test Cavity”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D007, pp. 393-395.
- P. Gladkikh and A. Y. Zelinsky, “New Abilities of Computer Code DeCA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT140, pp. 2164-2166.
- O. Bezditko, I. I. Karnaukhov, and A. Y. Zelinsky, “Survey and Alignment System of 100 MeV/100 kW Electron Linear Accelerator”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 87-89.
- A. Seryi et al., “Hydrostatic Level System for Slow Ground Motion Studies at Fermilab and SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH116, pp. 1479-1481.
- S. H. Kim, Y. J. Han, J. Y. Huang, S.-C. Kim, S. H. Nam, and S. S. Park, “Energy Stabilization of 2.5 GeV Linac using DeQing”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA063, pp. 717-719.
- R. P. Walker, “Progress with the Design of the UK's New Light Source Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE055, pp. 2269-2271.
- G. Gatti, A. M. Cook, J. B. Rosenzweig, and R. Tikhoplav, “Coherent Cherenkov Radiation as a Temporal Diagnostic for Microbunched Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN038, pp. 998-1000.
- G. D'Agostino, L. Calabretta, W. J. G. M, and D. Rifuggiato, “A CENTRAL REGION UPGRADE OF THE k800 SUPERCONDUCTING CYCLOTRON AT INFN-LNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1975-1978.
- E. S. Park, H. S. Han, Y. M. Koo, and Y. G. Nah, “Engineering Design of the PLS 2 GeV Storage Ring Dipole Magnet”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2345-2348.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation of the LNL ECR Ion Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B12, pp. 2417-2419.
- T. Kimura, “Development of the New Spill Control Device for J-PARC MR”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 192-194.
- Q. Z. Xing et al., “Development Progress of the H+/H- Linear Accelerators at Tsinghua University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 732-734.
- N. Hubert, L. Cassinari, J.-C. Denard, A. Nadji, L. S. N. Nadolski, and D. Pedeau, “Design of a Fast Orbit Feedback for SOLEIL”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT019, pp. XX-XX.
- V. Sajaev, G. Decker, and L. Emery, “Various Canting Schemes for Utilizing More Than One Insertion Device in an Insertion Device Straight Section”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO08, pp. 252-254.
- M. Ferrario, M. Boscolo, L. Picardi, C. Ronsivalle, and L. Serafini, “Beam Dynamics Study of an RF Bunch Compressor for High Brightness Beam Injectors”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI056, pp. 1762-1764.
Back to search