Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Castellano et al., “SURF: An IR FEL with the SC Linac LISA”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 611-614.
[n] C.-C. Kuo et al., “Design Status of the Taiwan Photon Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC004, pp. 1986-1988.
[n] P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
[n] C. H. Huang et al., “Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1848-1850. doi:10.18429/JACoW-IPAC2019-TUPRB081
[n] J. Borrel, Y. Dabin, F. Ewald, and P. Van Vaerenbergh, “Collimator for ESRF-EBS”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 23-25. doi:10.18429/JACoW-MEDSI2018-TUPH02
[n] S. R. Koscielniak et al., “Electron Linac Photo-fission Driver for the Rare Isotope Program at TRIUMF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD001, pp. 4275-4277.
[n] E. E. Wisniewski et al., “Demonstration of Fast, Single-shot Photocathode QE Mapping Method Using MLA Pattern Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1293-1295. doi:10.18429/JACoW-IPAC2018-TUPMF020
[n] A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
[n] J. G. M. Kleeven et al., “The IBA Superconducting Synchrocyclotron Project S2C2”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO4PB02, pp. 115-119.
[n] J. Choi, W. Guo, T. V. Shaftan, and X. Yang, “Reproducibility Issues of NSLS-II Storage Ring and Modeling of the Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2851-2853. doi:10.18429/JACoW-IPAC2017-WEPAB120
[n] I. Kriznar et al., “Making it all Work for Operators”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO203, pp. 237-239.
[n] M. Trinczek et al., “Beam Delivery and Future Initiatives at the ISAC Radioactive Ion Beam Facility”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP124, pp. 5074-5076.
[n] V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1705-1708. doi:10.18429/JACoW-IPAC2019-TUPRB013
[n] H. P. Ehret et al., “The Ion Sources at the Karlsruhe Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-07, pp. 194-196.
[n] G. Kube, “Review of Synchrotron Radiation based Diagnostics for Transverse Profile Measurements”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOO1A03, pp. 6-10.
[n] C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
[n] Y.-M. Abiven, J. Coquet, X. Deletoille, F. Dohou, P. Monteiro, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP089, pp. 576-578.
[n] M. Lindroos et al., “The ESS Accelerator”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOB06, pp. 994-998.
[n] S. Rubio-Manrique, F. Becheri, G. Cuni, D. Fernandez-Carreiras, C. Pascual-Izarra, and Z. Reszela, “PANIC, a Suite for Visualization, Logging and Notification of Incidents”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO206, pp. 243-245.
[n] J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 320-322. doi:10.18429/JACoW-LINAC2016-MOP106016
[n] J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
[n] J. Fox, L. Beckman, N. Hassanpour, L. Sapozhnikov, and D. Teytelman, “Low-Mode Coupled Bunch Feedback Channel for PEP-II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB042, pp. 3389-3391.
[n] Y.-M. Abiven, P. Betinelli-Deck, J. Bisou, F. Blache, G. Renaud, and S. Z. Zhang, “Open Hardware Collaboration: A Way to Improve Efficiency for a Team”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC077, pp. 273-276.
[n] J. Seok, M. Chung, M. E. Conde, G. Ha, and J. G. Power, “Double-Horn Suppression in EEX Based Bunch Compression”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 407-410. doi:10.18429/JACoW-NAPAC2019-TUPLM16
[n] E. Koukovini-Platia, H. Bartosik, M. Migliorati, and G. Rumolo, “High Intensity Effects of Fixed Target Beams in the CERN Injector Complex”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 237-242. doi:10.18429/JACoW-HB2018-WEA2WA01
[n] G. Rehm, M. G. Abbott, J. Rowland, and I. Uzun, “Digital EBPMs at Diamond: Operational Experience and Integration into a Fast Global Orbit Feedback”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOD1A01, pp. 24-26.
[n] E. A. Medvedko et al., “Stripline Beam Position Monitors for LCLS”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF037, pp. 190-193.
[n] R. P. Walker et al., “The European UV/VUV Storage Ring FEL Project at ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper FRXE05, pp. 93-97.
[n] W. B. Li et al., “Digital Longitudinal Bunch-by-bunch Feedback System for the HLS II”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA35, pp. 434-436.
[n] K. T. Hsu et al., “Design Status of the TPS Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB018, pp. 2725-2727.
[n] N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “Impedance Studies of 2D Azimuthally Symmetric Devices of Finite Length”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1A01, pp. 344-348.
[n] R. E. Laxdal et al., “Status of Superconducting Electron Linac Driver for Rare Ion Beam Production at TRIUMF”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC01, pp. 31-35.
[n] R. F. Welton et al., “Development of the SNS External Antenna H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP037, pp. 438-440.
[n] A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
[n] J. Li et al., “Preliminary Design of Electron Target for SRing at HIAF”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 40-43. doi:10.18429/JACoW-COOL2017-TUP08
[n] K. J. Peach, “Novel Ideas and Ramp;D for High Intensity Neutrino Beams”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper FRXBCH01, pp. 281-285.
[n] K. Akiyama et al., “Development of A Low Emittance DC Gun for Smith-Purcell BWO FEL”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH031, pp. 417-420.
[n] I. I. Popova, P. D. Ferguson, F. X. Gallmeier, E. Iverson, and W. Lu, “Shielding Analyses and Procedures for the SNS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB066, pp. 2845-2847.
[n] T. Dritschler, S. A. Chilingaryan, T. Farago, A. Kopmann, and M. Vogelgesang, “InfiniBand interconnects for high-throughput data acquisition in a TANGO environment”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO001, pp. 161-163.
[n] C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “A Feedback/Feedforward System at the TPS and its Component Performance”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 127-130. doi:10.18429/JACoW-PCaPAC2018-THCA3
[n] Yu. G. Alenitsky et al., “ISOCHRONOUS CYCLOTRON C250 FOR PROTON THERAPY APPLICATION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH10, pp. XX-XX.
[n] V. Litvinenko et al., “Commissioning of FEL-Based Coherent Electron Cooling System”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 132-135. doi:10.18429/JACoW-FEL2017-MOP041
[n] X. Pei et al., “Low Frequency RF System for the Indiana University Cooler Ring”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-05, pp. 523-525.
[n] O. Zagorodnova and T. Limberg, “Impedance Budget Database for the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP060, pp. 1220-1222.
[n] B. N. Gikal, G. G. Gulbekyan, and V. B. Kutner, “The Present Status of the U-400 Isochronous Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-11, pp. 125-128.
[n] S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
[n] S. Krinsky et al., “Collective Effects in the NSLS-II Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS074, pp. 1344-1346.
[n] J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHAULT02-2, pp. 1306-1309.
[n] A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
[n] L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 887-889. doi:10.18429/JACoW-NAPAC2016-WEPOB04
[n] J. F. Power, J. D. Gilpatrick, and D. Martinez, “Comparisons of Selected COTS and Custom Hardware for Beam Position and Phase Measurements for LANSCE”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF039, pp. 197-199.
[n] G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
[n] T. Yamada, H. Ogawa, Y. Sato, and K. Suzuki, “Status of the NIRS-Chiba Isochronous Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-08, pp. 61-64.
[n] J. Zink, M. K. Czwalinna, M. Fenner, S. Jab, J. Marjanovic, and H. Schlarb, “High-Speed Direct Sampling FMC for Beam Diagnostic and Accelerator Protection Applications”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 534-537. doi:10.18429/JACoW-IBIC2018-THOA02
[n] J. A. Clarke et al., “The Design of the Positron Source for the International Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBG03, pp. 1915-1917.
[n] Y.-S. Cheng et al., “Database Applications Development of the TPS Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 732-735. doi:10.18429/JACoW-ICALEPCS2015-WEPGF019
[n] C. Llewellyn Smith, “Clean Energy and the Fast Track to Fusion Power”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper FRYBCH01, pp. 295-299.
[n] E. G. Stern, R. Ainsworth, J. F. Amundson, and Q. Lu, “Simulating Batch-on-Batch Slip-Stacking in the Fermilab Recycler Using a New Multiple Interacting Bunch Capability in Synergia”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1135-1137. doi:10.18429/JACoW-NAPAC2016-THPOA18
[n] R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 8-11. doi:10.18429/JACoW-MEDSI2016-MOPE02
[n] C. Benedetti, E. Esarey, W. Leemans, and C. B. Schroeder, “Modeling a 10 GeV Laser-Plasma Accelerator with INF&RNO”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP082, pp. 250-252.
[n] J. P. Holzbauer et al., “Active Microphonics Compensation for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2687-2689. doi:10.18429/JACoW-IPAC2018-WEPML007
[n] T. Yamada, Y. Hirao, T. Kanai, H. Ogawa, Y. Sato, and K. Suzuki, “Recent Developments of the NIRS-Chiba Isochronous Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-07, pp. 106-110.
[n] K. Honkavaara, “Electron Beam Characterization at PITZ and the VUV-FEL at DESY”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper WEOB001, pp. XX-XX.
[n] E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2902-2905. doi:10.18429/JACoW-IPAC2017-WEPAB138
[n] A. Cianchi et al., “Optical Diffraction Radiation Interference as a Non-intercepting Emittance Measurement for High Brightness and High Repetition Rate Electron Beam”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOB02, pp. 353-356.
[n] Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
[n] P. Medve?ícek, S. Artinian, J. F. Bergoz, and M. Kobal, “MicroIOC LR-BPM - Beam Position Monitor Solution”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP016, pp. 204-206.
[n] C. Clayton, C. Joshi, W. Leemans, K. Marsh, M. Shu, and R. Williams, “Beatwave Acceleration Experiments”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-08, pp. 544-546.
[n] A. M. Cook et al., “Beam-Driven Dielectric Wakefield Accelerating Structure as a THz Radiation Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS020, pp. 3041-3043.
[n] M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 863-865. doi:10.18429/JACoW-LINAC2018-THPO076
[n] U. Iriso and A. Olmos, “Electron Beam Diagnostics for the ALBA Light Source”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOD1A03, pp. 27-29.
[n] A. Scheinker, “Adaptive Machine Learning and Feedback Control for Automatic Particle Accelerator Tuning”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 916-918. doi:10.18429/JACoW-NAPAC2019-THXBA3
[n] M. Kuntzsch, M. Gensch, U. Lehnert, P. Michel, R. Schurig, and J. Teichert, “Jitter Analysis at CW Repetition Rate With Large Spectral Range and High Resolution”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 43-45. doi:10.18429/JACoW-IBIC2015-MOPB009
[n] Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 155-157.
[n] J. Chavanne, C. Penel, B. Plan, and P. Van Vaerenbergh, “Magnetic Design Considerations for In-Vacuum Undulators at ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE033, pp. 2604-2606.
[n] M. Tomizawa, A. Y. Molodozhentsev, E. Nakamura, I. Sakai, and M. Uota, “New Beam Optics Design of Injection/Fast Extraction/Abort Lines of J-PARC Main Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN052, pp. 1508-1510.
[n] A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
[n] F. Ciocci, G. Dattoli, L. Giannessi, and A. Torre, “Design of Hybrid Magnet Undulators with Non-Constant Parameters for High Gain, High Efficiency Free Electron Laser”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1027-1030.
[n] S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n] D. Bulfone, A. Carniel, J.-C. Denard, F. Iazzourene, R. Richter, and A. Wrulich, “Design Considerations for the ELETTRA Beam Position Feedback Systems”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 895-898.
[n] Y.-S. Cheng, Y.-T. Chang, J. Chen, K. T. Hsu, C. H. Huang, and C. H. Kuo, “Construction of the TPS Network System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC018, pp. 1127-1130.
[n] M. Dehghan, F. Abbasi, H. Azizi, F. Ghasemi, and A. Taghibi Khotbeh-Sara, “Basic Design of the RF Power System for IRANCYC-10 Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1972-1974. doi:10.18429/JACoW-IPAC2019-TUPTS021
[n] F. Jackson, “Collimation Aperture for the Beam Delivery System of the International Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP016, pp. 586-588.
[n] J. Pasternak, J. Fourrier, and F. Meot, “Acceleration in spiral FFAG using field map data”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP068, pp. 3515-3517.
[n] M. P. Bourgarel, P. Attal, and E. Baron, “Modification of the GANIL Injectors”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-08, pp. 111-115.
[n] K. Makino, M. Berz, and E. Valetov, “Computation of Nonlinear Fields and Orbit and Spin Transfer Maps of Electrostatic Elements using Differential Algebras”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 168-171. doi:10.18429/JACoW-ICAP2015-THDBC1
[n] S. Ito, H. Matsuzaki, and A. Morita, “Current Status Report of RAPID, The University of Tokyo”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper B-01, pp. 241-244.
[n] S. M. Liuzzo et al., “Preparation of the EBS Beam Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1388-1391. doi:10.18429/JACoW-IPAC2019-TUPGW005
[n] J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2470-2473.
[n] N. Hubert et al., “A New Beam Angle Interlock at Soleil”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 318-320. doi:10.18429/JACoW-IBIC2015-TUPB009
[n] T. Hu et al., “Commissioning and First Performance of the LINAC-based Injector Applied in the HUST THz-FEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 662-664. doi:10.18429/JACoW-FEL2015-WEP042
[n] V. Mauch, M. Bonn, S. A. Chilingaryan, A. Kopmann, W. Mexner, and D. Ressmann, “OpenGL-Based Data Analysis in Virtualized Self-Service Environments”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FCO202, pp. 234-236.
[n] F. Lindau et al., “MAXIV Photocathode Gun Laser System Specification and Diagnostics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1544-1546. doi:10.18429/JACoW-IPAC2017-TUPAB097
[n] F. Y. Li, B. E. Carlsten, R. Garimella, C. Huang, and T. J. Kwan, “Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 397-399. doi:10.18429/JACoW-IPAC2019-MOPGW116
[n] C. Birattari, M. Bonardi, F. Groppi, and L. Gini, “Review of Cyclotron Production and Quality Control of High Specific Activity" Radionuclides for Biomedical”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-23, pp. -Biological.
[n] C. Lechner et al., “Measurements of the Timing Stability at the FLASH1 Seeding Experiment”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP076, pp. 913-916.
[n] R. F. Hubbard et al., “Plasma-Based Laser Pulse Control Techniques for Laser Wakefield Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH134, pp. 3990-3992.
[n] W. Zhang, Z. Xu, X. Yang, W. Zhan, and H. Zhao, “RF Acceleration System at HIRFL-CSR Main Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB042, pp. 1288-1290.
[n] A. Orzhekhovskaya and G. Franchetti, “A Space Charge Algorithm for the Bunches of Elliptical Cross Section with Arbitrary Beam Size and Particle Distribution”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP05, pp. 106-109.
[n] C. Saji et al., “Upgrade of the Accelerator Radiation Safety System for SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP091, pp. 579-581.
[n] B. Kostka, R. Rossmanith, A. Bernhard, U. Schindler, and E. Steffens, “Superconductive Undulators with Variable Polarization Direction”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM103, pp. XX-XX.
[n] M. Kuntzsch, A. Buechner, T. Kirschke, U. Lehnert, and F. Roeser, “Future Timing and Synchronization Scheme at ELBE”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD31, pp. 116-118.
[n] J. C. Dooling et al., “Investigations of the Electron Beam Energy Jitter Generated in the Photocathode RF Gun at the Advanced Photon Source Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 124-127. doi:10.18429/JACoW-NAPAC2019-MOPLM13
[n] J. Joo, D. Jeon, M. J. Joung, Y. Jung, H. J. Kim, and M. Lee, “Surface Treatment Facilities for SCRF Cavities at RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP084, pp. 619-621.
[n] G. Franchetti, “Effect of Self-consistency on Periodic Resonance Crossing”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1C01, pp. 429-433.
[n] P. K. Skowronski et al., “Progress towards the CLIC Feasibility Demonstration in CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE027, pp. 3410-3412.
[n] G. Ha, M. E. Conde, and J. G. Power, “Arbitrary Transverse Profile Shaping using Transverse Wigglers”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 403-406. doi:10.18429/JACoW-NAPAC2019-TUPLM15
[n] W. K. Lau, A. P. Lee, N. Y. Huang, and Z. Y. Wei, “The Ultrashort Beam Linac System and Proposed Coherent THz Radiation Sources at NSRRC”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO41, pp. 309-312.
[n] K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Development of a High Radiation Resistant Septum for JPARC Main Ring Injection System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB010, pp. 298-300.
[n] S. Caspi and P. Ferracin, “Limits of Nb3Sn Accelerator Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAA001, pp. 107-111.
[n] M. White et al., “Status of the Advanced Photon Source (APS) Linear Accelerator (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-62, pp. 208-210.
[n] C. A. J. van der Geer, M. J. de Loos, D. A. Jaroszynski, and S. B. van der Geer, “Repetitive Bunches from RF-Photo Gun Radiate Coherently”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS29, pp. XX-XX.
[n] R. D. Ruth et al., “Results from the SLAC NLC Test Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 439, pp. XX-XX.
[n] A. S. Parfenova, G. Franchetti, and I. Hofmann, “Measuring Ring Nonlinear Components via Induced Linear Feed-down""”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC066, pp. 3137-3139.
[n] R. J. Abrams, M. A. Cummings, V. G. Dudnikov, R. P. Johnson, and M. Popovic, “Residual-Gas Beam Profile Monitors for Intense Beams in Transfer Lines”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 469-472. doi:10.18429/JACoW-IPAC2017-MOPAB144
[n] M. Schwarz, D. Bade, J. Corbet, and H. Podlech, “LINAC-Multitool - an Open Source Java-Toolkit”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3179-3181. doi:10.18429/JACoW-IPAC2018-THPAF083
[n] T. Fujita et al., “Overview of Short Pulse X-ray Generation using Crab Cavities at SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOOCMH02, pp. 39-41.
[n] H. Hama et al., “Super Coherent THz Light Source Based on an Isochronous Ring with Very Short Electron Bunches”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH024, pp. 371-374.
[n] F. Gao, W. Gai, C.-J. Jing, W. Liu, and T. Wong, “Design of a 20.8/35.1 GHz Higher-Order-Mode Dielectric-Loaded Power Extractor Set”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP002, pp. 4538-4540.
[n] G. V. Eremeev, M. J. Kelley, U. Pudasaini, and C. E. Reece, “Insights Into Nb?Sn Coating of CEBAF Cavities From Witness Sample Analysis”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 60-64. doi:10.18429/JACoW-SRF2019-MOP016
[n] E. Carrone, M. D. Cyterski, J. M. Murphy, and F. Tao, “A Streamlined Architecture of LCLS-II Beam Containment System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA07, pp. 930-932.
[n] B. Kalantari and T. Korhonen, “Integration of UE212 Electromagnetic Double Undulator into the SLS Control System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE023, pp. 2616-2618.
[n] S. Vermersch, “The Laser Megajoule Facility: The Computational System PARC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 38-41. doi:10.18429/JACoW-ICALEPCS2015-MOC3O06
[n] A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
[n] M. E. Busse-Grawitz, P. Marchand, and W. Tron, “RF System for the SLS Booster and Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP137, pp. 986-988.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Insights into Formation of Nb3Sn Film During the Vapor Diffusion Process”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 539-542. doi:10.18429/JACoW-SRF2017-TUPB067
[n] A. Fukasawa, S. G. Anderson, H. Badakov, E. Hemsing, B. D. O, and J. B. Rosenzweig, “The FINDER Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS035, pp. 1260-1262.
[n] Y. Sun, “Linear Scaling on Choosing a Bunch Compression Ratio for an FEL Driver”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO11, pp. 261-263.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Castellano et al., “SURF: An IR FEL with the SC Linac LISA”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 611-614.
- C.-C. Kuo et al., “Design Status of the Taiwan Photon Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC004, pp. 1986-1988.
- P. Wang et al., “A Comparitive Study of High Power, Multistage, X-Band TWT Amplifiers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA88, pp. 3600-3602.
- C. H. Huang et al., “Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1848-1850.
- J. Borrel, Y. Dabin, F. Ewald, and P. Van Vaerenbergh, “Collimator for ESRF-EBS”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 23-25.
- S. R. Koscielniak et al., “Electron Linac Photo-fission Driver for the Rare Isotope Program at TRIUMF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD001, pp. 4275-4277.
- E. E. Wisniewski et al., “Demonstration of Fast, Single-shot Photocathode QE Mapping Method Using MLA Pattern Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1293-1295.
- A. Kiourkos, P. Golonka, M. Gonzalez-Berges, S. Infante, and J-C. Tournier, “Centralized Data Engineering for the Monitoring of the CERN Electrical Network”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC023, pp. 107-110.
- J. G. M. Kleeven et al., “The IBA Superconducting Synchrocyclotron Project S2C2”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO4PB02, pp. 115-119.
- J. Choi, W. Guo, T. V. Shaftan, and X. Yang, “Reproducibility Issues of NSLS-II Storage Ring and Modeling of the Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2851-2853.
- I. Kriznar et al., “Making it all Work for Operators”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO203, pp. 237-239.
- M. Trinczek et al., “Beam Delivery and Future Initiatives at the ISAC Radioactive Ion Beam Facility”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP124, pp. 5074-5076.
- V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1705-1708.
- H. P. Ehret et al., “The Ion Sources at the Karlsruhe Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-07, pp. 194-196.
- G. Kube, “Review of Synchrotron Radiation based Diagnostics for Transverse Profile Measurements”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOO1A03, pp. 6-10.
- C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
- Y.-M. Abiven, J. Coquet, X. Deletoille, F. Dohou, P. Monteiro, and R. P. Patrick, “Machine Protection and Interlock Systems at Synchrotron SOLEIL”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP089, pp. 576-578.
- M. Lindroos et al., “The ESS Accelerator”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOB06, pp. 994-998.
- S. Rubio-Manrique, F. Becheri, G. Cuni, D. Fernandez-Carreiras, C. Pascual-Izarra, and Z. Reszela, “PANIC, a Suite for Visualization, Logging and Notification of Incidents”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO206, pp. 243-245.
- J. T. Bradley III, D. Rees, A. Scheinker, and R. L. Sheffield, “High Power RF Requirements for Driving Discontinuous Bunch Trains in the MaRIE Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 320-322.
- J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
- J. Fox, L. Beckman, N. Hassanpour, L. Sapozhnikov, and D. Teytelman, “Low-Mode Coupled Bunch Feedback Channel for PEP-II”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB042, pp. 3389-3391.
- Y.-M. Abiven, P. Betinelli-Deck, J. Bisou, F. Blache, G. Renaud, and S. Z. Zhang, “Open Hardware Collaboration: A Way to Improve Efficiency for a Team”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC077, pp. 273-276.
- J. Seok, M. Chung, M. E. Conde, G. Ha, and J. G. Power, “Double-Horn Suppression in EEX Based Bunch Compression”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 407-410.
- E. Koukovini-Platia, H. Bartosik, M. Migliorati, and G. Rumolo, “High Intensity Effects of Fixed Target Beams in the CERN Injector Complex”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 237-242.
- G. Rehm, M. G. Abbott, J. Rowland, and I. Uzun, “Digital EBPMs at Diamond: Operational Experience and Integration into a Fast Global Orbit Feedback”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOD1A01, pp. 24-26.
- E. A. Medvedko et al., “Stripline Beam Position Monitors for LCLS”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF037, pp. 190-193.
- R. P. Walker et al., “The European UV/VUV Storage Ring FEL Project at ELETTRA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper FRXE05, pp. 93-97.
- W. B. Li et al., “Digital Longitudinal Bunch-by-bunch Feedback System for the HLS II”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA35, pp. 434-436.
- K. T. Hsu et al., “Design Status of the TPS Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB018, pp. 2725-2727.
- N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “Impedance Studies of 2D Azimuthally Symmetric Devices of Finite Length”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1A01, pp. 344-348.
- R. E. Laxdal et al., “Status of Superconducting Electron Linac Driver for Rare Ion Beam Production at TRIUMF”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC01, pp. 31-35.
- R. F. Welton et al., “Development of the SNS External Antenna H- Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP037, pp. 438-440.
- A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
- J. Li et al., “Preliminary Design of Electron Target for SRing at HIAF”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 40-43.
- K. J. Peach, “Novel Ideas and Ramp;D for High Intensity Neutrino Beams”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper FRXBCH01, pp. 281-285.
- K. Akiyama et al., “Development of A Low Emittance DC Gun for Smith-Purcell BWO FEL”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH031, pp. 417-420.
- I. I. Popova, P. D. Ferguson, F. X. Gallmeier, E. Iverson, and W. Lu, “Shielding Analyses and Procedures for the SNS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB066, pp. 2845-2847.
- T. Dritschler, S. A. Chilingaryan, T. Farago, A. Kopmann, and M. Vogelgesang, “InfiniBand interconnects for high-throughput data acquisition in a TANGO environment”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO001, pp. 161-163.
- C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “A Feedback/Feedforward System at the TPS and its Component Performance”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 127-130.
- Yu. G. Alenitsky et al., “ISOCHRONOUS CYCLOTRON C250 FOR PROTON THERAPY APPLICATION”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH10, pp. XX-XX.
- V. Litvinenko et al., “Commissioning of FEL-Based Coherent Electron Cooling System”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 132-135.
- X. Pei et al., “Low Frequency RF System for the Indiana University Cooler Ring”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-05, pp. 523-525.
- O. Zagorodnova and T. Limberg, “Impedance Budget Database for the European XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP060, pp. 1220-1222.
- B. N. Gikal, G. G. Gulbekyan, and V. B. Kutner, “The Present Status of the U-400 Isochronous Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-11, pp. 125-128.
- S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
- S. Krinsky et al., “Collective Effects in the NSLS-II Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS074, pp. 1344-1346.
- J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHAULT02-2, pp. 1306-1309.
- A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
- L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 887-889.
- J. F. Power, J. D. Gilpatrick, and D. Martinez, “Comparisons of Selected COTS and Custom Hardware for Beam Position and Phase Measurements for LANSCE”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF039, pp. 197-199.
- G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
- T. Yamada, H. Ogawa, Y. Sato, and K. Suzuki, “Status of the NIRS-Chiba Isochronous Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-08, pp. 61-64.
- J. Zink, M. K. Czwalinna, M. Fenner, S. Jab, J. Marjanovic, and H. Schlarb, “High-Speed Direct Sampling FMC for Beam Diagnostic and Accelerator Protection Applications”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 534-537.
- J. A. Clarke et al., “The Design of the Positron Source for the International Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBG03, pp. 1915-1917.
- Y.-S. Cheng et al., “Database Applications Development of the TPS Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 732-735.
- C. Llewellyn Smith, “Clean Energy and the Fast Track to Fusion Power”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper FRYBCH01, pp. 295-299.
- E. G. Stern, R. Ainsworth, J. F. Amundson, and Q. Lu, “Simulating Batch-on-Batch Slip-Stacking in the Fermilab Recycler Using a New Multiple Interacting Bunch Capability in Synergia”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1135-1137.
- R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 8-11.
- C. Benedetti, E. Esarey, W. Leemans, and C. B. Schroeder, “Modeling a 10 GeV Laser-Plasma Accelerator with INF&RNO”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP082, pp. 250-252.
- J. P. Holzbauer et al., “Active Microphonics Compensation for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2687-2689.
- T. Yamada, Y. Hirao, T. Kanai, H. Ogawa, Y. Sato, and K. Suzuki, “Recent Developments of the NIRS-Chiba Isochronous Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-07, pp. 106-110.
- K. Honkavaara, “Electron Beam Characterization at PITZ and the VUV-FEL at DESY”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper WEOB001, pp. XX-XX.
- E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2902-2905.
- A. Cianchi et al., “Optical Diffraction Radiation Interference as a Non-intercepting Emittance Measurement for High Brightness and High Repetition Rate Electron Beam”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOB02, pp. 353-356.
- Yu. A. Rogovsky and I. Nesterenko, “Calibration of the Electrostatic Beam Position Monitors for VEPP-2000”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD14, pp. 68-70.
- P. Medve?ícek, S. Artinian, J. F. Bergoz, and M. Kobal, “MicroIOC LR-BPM - Beam Position Monitor Solution”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP016, pp. 204-206.
- C. Clayton, C. Joshi, W. Leemans, K. Marsh, M. Shu, and R. Williams, “Beatwave Acceleration Experiments”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-08, pp. 544-546.
- A. M. Cook et al., “Beam-Driven Dielectric Wakefield Accelerating Structure as a THz Radiation Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS020, pp. 3041-3043.
- M. Chen et al., “Multiphysics Design Studies of a Superconducting Quarter-wave Resonator at Peking University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 863-865.
- U. Iriso and A. Olmos, “Electron Beam Diagnostics for the ALBA Light Source”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOD1A03, pp. 27-29.
- A. Scheinker, “Adaptive Machine Learning and Feedback Control for Automatic Particle Accelerator Tuning”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 916-918.
- M. Kuntzsch, M. Gensch, U. Lehnert, P. Michel, R. Schurig, and J. Teichert, “Jitter Analysis at CW Repetition Rate With Large Spectral Range and High Resolution”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 43-45.
- Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 155-157.
- J. Chavanne, C. Penel, B. Plan, and P. Van Vaerenbergh, “Magnetic Design Considerations for In-Vacuum Undulators at ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE033, pp. 2604-2606.
- M. Tomizawa, A. Y. Molodozhentsev, E. Nakamura, I. Sakai, and M. Uota, “New Beam Optics Design of Injection/Fast Extraction/Abort Lines of J-PARC Main Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN052, pp. 1508-1510.
- A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
- F. Ciocci, G. Dattoli, L. Giannessi, and A. Torre, “Design of Hybrid Magnet Undulators with Non-Constant Parameters for High Gain, High Efficiency Free Electron Laser”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1027-1030.
- S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2277-2280.
- D. Bulfone, A. Carniel, J.-C. Denard, F. Iazzourene, R. Richter, and A. Wrulich, “Design Considerations for the ELETTRA Beam Position Feedback Systems”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 895-898.
- Y.-S. Cheng, Y.-T. Chang, J. Chen, K. T. Hsu, C. H. Huang, and C. H. Kuo, “Construction of the TPS Network System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC018, pp. 1127-1130.
- M. Dehghan, F. Abbasi, H. Azizi, F. Ghasemi, and A. Taghibi Khotbeh-Sara, “Basic Design of the RF Power System for IRANCYC-10 Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1972-1974.
- F. Jackson, “Collimation Aperture for the Beam Delivery System of the International Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP016, pp. 586-588.
- J. Pasternak, J. Fourrier, and F. Meot, “Acceleration in spiral FFAG using field map data”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP068, pp. 3515-3517.
- M. P. Bourgarel, P. Attal, and E. Baron, “Modification of the GANIL Injectors”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-08, pp. 111-115.
- K. Makino, M. Berz, and E. Valetov, “Computation of Nonlinear Fields and Orbit and Spin Transfer Maps of Electrostatic Elements using Differential Algebras”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 168-171.
- S. Ito, H. Matsuzaki, and A. Morita, “Current Status Report of RAPID, The University of Tokyo”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper B-01, pp. 241-244.
- S. M. Liuzzo et al., “Preparation of the EBS Beam Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1388-1391.
- J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2470-2473.
- N. Hubert et al., “A New Beam Angle Interlock at Soleil”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 318-320.
- T. Hu et al., “Commissioning and First Performance of the LINAC-based Injector Applied in the HUST THz-FEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 662-664.
- V. Mauch, M. Bonn, S. A. Chilingaryan, A. Kopmann, W. Mexner, and D. Ressmann, “OpenGL-Based Data Analysis in Virtualized Self-Service Environments”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FCO202, pp. 234-236.
- F. Lindau et al., “MAXIV Photocathode Gun Laser System Specification and Diagnostics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1544-1546.
- F. Y. Li, B. E. Carlsten, R. Garimella, C. Huang, and T. J. Kwan, “Validation of a Novel Method for the Calculation of Near-Field Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 397-399.
- C. Birattari, M. Bonardi, F. Groppi, and L. Gini, “Review of Cyclotron Production and Quality Control of High Specific Activity" Radionuclides for Biomedical”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-23, pp. -Biological.
- C. Lechner et al., “Measurements of the Timing Stability at the FLASH1 Seeding Experiment”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP076, pp. 913-916.
- R. F. Hubbard et al., “Plasma-Based Laser Pulse Control Techniques for Laser Wakefield Accelerators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH134, pp. 3990-3992.
- W. Zhang, Z. Xu, X. Yang, W. Zhan, and H. Zhao, “RF Acceleration System at HIRFL-CSR Main Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB042, pp. 1288-1290.
- A. Orzhekhovskaya and G. Franchetti, “A Space Charge Algorithm for the Bunches of Elliptical Cross Section with Arbitrary Beam Size and Particle Distribution”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP05, pp. 106-109.
- C. Saji et al., “Upgrade of the Accelerator Radiation Safety System for SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP091, pp. 579-581.
- B. Kostka, R. Rossmanith, A. Bernhard, U. Schindler, and E. Steffens, “Superconductive Undulators with Variable Polarization Direction”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM103, pp. XX-XX.
- M. Kuntzsch, A. Buechner, T. Kirschke, U. Lehnert, and F. Roeser, “Future Timing and Synchronization Scheme at ELBE”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD31, pp. 116-118.
- J. C. Dooling et al., “Investigations of the Electron Beam Energy Jitter Generated in the Photocathode RF Gun at the Advanced Photon Source Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 124-127.
- J. Joo, D. Jeon, M. J. Joung, Y. Jung, H. J. Kim, and M. Lee, “Surface Treatment Facilities for SCRF Cavities at RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP084, pp. 619-621.
- G. Franchetti, “Effect of Self-consistency on Periodic Resonance Crossing”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1C01, pp. 429-433.
- P. K. Skowronski et al., “Progress towards the CLIC Feasibility Demonstration in CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE027, pp. 3410-3412.
- G. Ha, M. E. Conde, and J. G. Power, “Arbitrary Transverse Profile Shaping using Transverse Wigglers”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 403-406.
- W. K. Lau, A. P. Lee, N. Y. Huang, and Z. Y. Wei, “The Ultrashort Beam Linac System and Proposed Coherent THz Radiation Sources at NSRRC”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO41, pp. 309-312.
- K. Fan, K. Ishii, H. Matsumoto, and N. Matsumoto, “Development of a High Radiation Resistant Septum for JPARC Main Ring Injection System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB010, pp. 298-300.
- S. Caspi and P. Ferracin, “Limits of Nb3Sn Accelerator Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAA001, pp. 107-111.
- M. White et al., “Status of the Advanced Photon Source (APS) Linear Accelerator (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-62, pp. 208-210.
- C. A. J. van der Geer, M. J. de Loos, D. A. Jaroszynski, and S. B. van der Geer, “Repetitive Bunches from RF-Photo Gun Radiate Coherently”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS29, pp. XX-XX.
- R. D. Ruth et al., “Results from the SLAC NLC Test Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 439, pp. XX-XX.
- A. S. Parfenova, G. Franchetti, and I. Hofmann, “Measuring Ring Nonlinear Components via Induced Linear Feed-down""”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC066, pp. 3137-3139.
- R. J. Abrams, M. A. Cummings, V. G. Dudnikov, R. P. Johnson, and M. Popovic, “Residual-Gas Beam Profile Monitors for Intense Beams in Transfer Lines”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 469-472.
- M. Schwarz, D. Bade, J. Corbet, and H. Podlech, “LINAC-Multitool - an Open Source Java-Toolkit”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3179-3181.
- T. Fujita et al., “Overview of Short Pulse X-ray Generation using Crab Cavities at SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOOCMH02, pp. 39-41.
- H. Hama et al., “Super Coherent THz Light Source Based on an Isochronous Ring with Very Short Electron Bunches”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH024, pp. 371-374.
- F. Gao, W. Gai, C.-J. Jing, W. Liu, and T. Wong, “Design of a 20.8/35.1 GHz Higher-Order-Mode Dielectric-Loaded Power Extractor Set”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP002, pp. 4538-4540.
- G. V. Eremeev, M. J. Kelley, U. Pudasaini, and C. E. Reece, “Insights Into Nb?Sn Coating of CEBAF Cavities From Witness Sample Analysis”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 60-64.
- E. Carrone, M. D. Cyterski, J. M. Murphy, and F. Tao, “A Streamlined Architecture of LCLS-II Beam Containment System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA07, pp. 930-932.
- B. Kalantari and T. Korhonen, “Integration of UE212 Electromagnetic Double Undulator into the SLS Control System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE023, pp. 2616-2618.
- S. Vermersch, “The Laser Megajoule Facility: The Computational System PARC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 38-41.
- A. Beckmann, S. Karabekyan, and J. Pflueger, “A Flexible and Testable Software Architecture: Applying Presenter First to a Device Server for the DOOCS Accelerator Control System of the European XFEL”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCD05, pp. 131-133.
- M. E. Busse-Grawitz, P. Marchand, and W. Tron, “RF System for the SLS Booster and Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP137, pp. 986-988.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Insights into Formation of Nb3Sn Film During the Vapor Diffusion Process”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 539-542.
- A. Fukasawa, S. G. Anderson, H. Badakov, E. Hemsing, B. D. O, and J. B. Rosenzweig, “The FINDER Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS035, pp. 1260-1262.
- Y. Sun, “Linear Scaling on Choosing a Bunch Compression Ratio for an FEL Driver”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO11, pp. 261-263.
Back to search