Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Zh. X. Tang, S. X. Dong, Y. J. Pei, and B. F. Wei, “Cold Test of a Novel S-Band 1.6 Cell Photocathode RF Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4045-4047. doi:10.18429/JACoW-IPAC2021-THPAB145
[n] X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2921-2923. doi:10.18429/JACoW-IPAC2015-WEPMN004
[n] A. Regan et al., “Newly Designed Field Control Module for the SNS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB036, pp. 3371-3373.
[n] R. Li, “Radial Eigenmodes for a Toroidal Waveguide with Rectangular Cross Section”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR095, pp. 3159-3161.
[n] G. A. Karamysheva and L. M. Onischenko, “INJECTION SYSTEM OF THE COMPACT CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO18, pp. XX-XX.
[n] A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
[n] Y. Han, M.-Y. Huang, Z. Li, A. Li, and J. Peng, “Study of energy jitter and energy spread compression for the CSNS-II linac”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4611, unpublished.
[n] C. Yao et al., “Recent Improvement of the APS Booster Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA072, pp. 252-254.
[n] R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 501-503. doi:10.18429/JACoW-IPAC2014-MOPME057
[n] R. Li and C.-Y. Tsai, “CSR Impedance for Non-Ultrarelativistic Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 709-712. doi:10.18429/JACoW-IPAC2015-MOPMN004
[n] R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
[n] S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
[n] Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n] C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n] S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 596-599. doi:10.18429/JACoW-IPAC2015-MOPMA025
[n] V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
[n] M. W. Wang et al., “A Rotation Method to Calibrate BPM Electric Offsets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2595-2597. doi:10.18429/JACoW-IPAC2019-WEPGW052
[n] R. M. Zwaska, W. Chou, I. Kourbanis, A. Marchionni, V. D. Shiltsev, and X. Zhang, “Electron Cloud Investigations in the Fermilab Main Injector”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper THAW05, pp. XX-XX.
[n] S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
[n] S. P. Antipov et al., “Subpicosecond Bunch Train Production for High Power Tunable THz Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA08, pp. 604-606.
[n] L. Doolittle, M. Kesselman, J. F. Power, and R. Witkover, “SNS Project-Wide Beam Current Monitors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B16, pp. 1750-1752.
[n] S. A. Kostromin, G. A. Karamysheva, N. A. Morozov, and E. Samsonov, “Study of Beam Capture in Compact Synchrocyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT015, pp. 353-355.
For LaTeX
Use Complete Form
For BibTeX
References
- Zh. X. Tang, S. X. Dong, Y. J. Pei, and B. F. Wei, “Cold Test of a Novel S-Band 1.6 Cell Photocathode RF Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4045-4047.
- X. Qi and H. Geng, “Progress on the CSNS Power Supply System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2921-2923.
- A. Regan et al., “Newly Designed Field Control Module for the SNS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB036, pp. 3371-3373.
- R. Li, “Radial Eigenmodes for a Toroidal Waveguide with Rectangular Cross Section”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR095, pp. 3159-3161.
- G. A. Karamysheva and L. M. Onischenko, “INJECTION SYSTEM OF THE COMPACT CYCLOTRON”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO18, pp. XX-XX.
- A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
- Y. Han, M.-Y. Huang, Z. Li, A. Li, and J. Peng, “Study of energy jitter and energy spread compression for the CSNS-II linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4611, this conference.
- C. Yao et al., “Recent Improvement of the APS Booster Synchrotron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA072, pp. 252-254.
- R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 501-503.
- R. Li and C.-Y. Tsai, “CSR Impedance for Non-Ultrarelativistic Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 709-712.
- R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351.
- S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479.
- Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3891-3894.
- C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2419-2421.
- S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 540-542.
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 596-599.
- V. Blinov et al., “Linux-Based Toolkit on the VEPP-4 Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP028, pp. XX-XX.
- M. W. Wang et al., “A Rotation Method to Calibrate BPM Electric Offsets”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2595-2597.
- R. M. Zwaska, W. Chou, I. Kourbanis, A. Marchionni, V. D. Shiltsev, and X. Zhang, “Electron Cloud Investigations in the Fermilab Main Injector”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper THAW05, pp. XX-XX.
- S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122.
- S. P. Antipov et al., “Subpicosecond Bunch Train Production for High Power Tunable THz Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA08, pp. 604-606.
- L. Doolittle, M. Kesselman, J. F. Power, and R. Witkover, “SNS Project-Wide Beam Current Monitors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1B16, pp. 1750-1752.
- S. A. Kostromin, G. A. Karamysheva, N. A. Morozov, and E. Samsonov, “Study of Beam Capture in Compact Synchrocyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT015, pp. 353-355.
Back to search