Favourites
For Word
[n] J. Nguyen Xuan and V. Baggiolini, “A Testbed for Validating the LHC Controls System Core Before Deployment”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS003, pp. 977-980.
[n] R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484.
[n] M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
[n] H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 959-962.
[n] G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 846-848. doi:10.18429/JACoW-ICALEPCS2017-TUPHA179
[n] B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
[n] W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
[n] S. Sampayan, G. Caporaso, B. Carder, M. Norton, D. Trimble, and J. Elizondo, “Optically Induced Surface Flashover Switching for the Dielectric Wall Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA20, pp. 2123-2125.
[n] R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
[n] E. G. Parozzi et al., “Future Neutrino Beam Studies Under the Framework of Physics Beyond Colliders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2044-2047. doi:10.18429/JACoW-IPAC2022-WEPOTK008
[n] I. Bazarov and G. H. Hoffstaetter, “Lattice Options for a 5 GeV Light Source at Cornell”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB009, pp. 842-844.
[n] P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1142-1145.
[n] L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
[n] Y. Kim et al., “Bunch Length Beating in PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH124, pp. 1957-1959.
[n] P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
[n] H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1502-1505.
[n] M-H. Moscatello, “Preliminary Design of a New Central Region for the LNS Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXC-03, pp. 454-456.
[n] M. Szczepaniak, A. Wawrzyniak, D. Teytelman, K. Dudek, R. Panas, and W. Wiatrowska, “Implementation and Initial Operation of the Bunch-by-Bunch Feedback System at SOLARIS”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 424-428. doi:10.18429/JACoW-IBIC2025-TUPCO28
[n] P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627.
[n] X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
[n] H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
[n] L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1162-1167. doi:10.18429/JACoW-ICALEPCS2017-THBPA06
[n] P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
[n] Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
[n] B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
[n] B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
[n] F. Loyer, “Status Report on the GANIL Renovation Program”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-10, pp. 74-77.
[n] D. Werder et al., “EPICS Data Streaming and HDF File Writing for ESS Benchmarked Using the Virtual AMOR Instrument”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1815-1819. doi:10.18429/JACoW-ICALEPCS2017-THPHA167
[n] P. Burrows et al., “The FONT4 ILC Intra-train Beam-based Digital Feedback System Prototype”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN108, pp. 416-418.
[n] H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
[n] J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
[n] L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n] V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
[n] R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
[n] J. T. M. Lyles et al., “System Considerations for 201.25 MHz RF System for LANSCE”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO14, pp. 963-965.
[n] P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
[n] D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 477-479. doi:10.18429/JACoW-RUPAC2018-THPSC35
[n] C. M. Astefanous, J. P. Deacutis, D. Holmes, T. Schultheiss, I. Ben-Zvi, and W. Xu, “Design and Analysis of SRF Cavities for Pressure Vessel Code Compliance”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP269, pp. 1322-1324.
[n] I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3046-3047. doi:10.18429/JACoW-IPAC2015-WEPMN052
For LaTeX
Use Complete Form
For BibTeX
References
- J. Nguyen Xuan and V. Baggiolini, “A Testbed for Validating the LHC Controls System Core Before Deployment”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS003, pp. 977-980.
- R. Avery et al., “The Era 4 MeV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 479-484.
- M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
- H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 959-962.
- G. Vecchio et al., “Management Software and Data Exchange Protocol for the INFN-LNS Accelerators Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 846-848.
- B. Autin et al., “CERN 400 GeV Proton Storage Rings with Superconducting Magnets”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1187-1191.
- W. Sliwinski, P. Charrue, and I. Yastrebov, “Status of the RBAC Infrastructure and Lessons Learnt from its Deployment in LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU009, pp. 702-705.
- S. Sampayan, G. Caporaso, B. Carder, M. Norton, D. Trimble, and J. Elizondo, “Optically Induced Surface Flashover Switching for the Dielectric Wall Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA20, pp. 2123-2125.
- R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
- E. G. Parozzi et al., “Future Neutrino Beam Studies Under the Framework of Physics Beyond Colliders”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2044-2047.
- I. Bazarov and G. H. Hoffstaetter, “Lattice Options for a 5 GeV Light Source at Cornell”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB009, pp. 842-844.
- P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1142-1145.
- L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
- Y. Kim et al., “Bunch Length Beating in PLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH124, pp. 1957-1959.
- P. Sp?ñdtke, “Computer Simulation of High-Current DC Ion Beams”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0012, pp. 356-358.
- H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1502-1505.
- M-H. Moscatello, “Preliminary Design of a New Central Region for the LNS Superconducting Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXC-03, pp. 454-456.
- M. Szczepaniak, A. Wawrzyniak, D. Teytelman, K. Dudek, R. Panas, and W. Wiatrowska, “Implementation and Initial Operation of the Bunch-by-Bunch Feedback System at SOLARIS”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 424-428.
- P. K. Roy et al., “Non-Intercepting Diagnostic for the HIF Neutralized Transport Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG016, pp. 2625-2627.
- X. Singer, A. Ermakov, A. Matheisen, A. Schmidt, and W. Singer, “Structure of the Electron Beam Welding Connections”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO074, pp. 412-412.
- H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
- L. Schrettner, B. Bag?â, B. Erdohelyi, T. M. Gaizer, A. Heidrich, and G. Nyiri, “Configuration Management for the Integrated Control System Software of ELI-ALPS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1162-1167.
- P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
- Y. Kim et al., “RF Noise Driven Dipole Mode Parametric Resonance”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH123, pp. 1954-1956.
- B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
- B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
- F. Loyer, “Status Report on the GANIL Renovation Program”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-10, pp. 74-77.
- D. Werder et al., “EPICS Data Streaming and HDF File Writing for ESS Benchmarked Using the Virtual AMOR Instrument”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1815-1819.
- P. Burrows et al., “The FONT4 ILC Intra-train Beam-based Digital Feedback System Prototype”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN108, pp. 416-418.
- H. Kotaki et al., “Control and Pulsewidth-measurement of Laser Accelerated Electron Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THOAMH03, pp. 3608-3610.
- J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843.
- L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 789-793.
- V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
- R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2514-2517.
- J. T. M. Lyles et al., “System Considerations for 201.25 MHz RF System for LANSCE”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO14, pp. 963-965.
- P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597.
- D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 477-479.
- C. M. Astefanous, J. P. Deacutis, D. Holmes, T. Schultheiss, I. Ben-Zvi, and W. Xu, “Design and Analysis of SRF Cavities for Pressure Vessel Code Compliance”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP269, pp. 1322-1324.
- I. Martel, C. Bontoiu, J. A. Duenas, D. Gordo, A. K. Orduz, and J. Sanchez-Segovia, “A New RF Laboratory for Developing Accelerator Cavities at the University of Huelva”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3046-3047.
Back to search