Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1950-1953. doi:10.18429/JACoW-IPAC2023-TUPL098
[n] P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 283-287. doi:10.18429/JACoW-MEDSI2016-WECA03
[n] M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1933-1936.
[n] R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1344-1347.
[n] A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
[n] Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
[n] I. Karnaukhov, S. Kononenko, A. Shcherbakov, V. Nemoshkalenko, V. Molodkin, and A. Shpak, “A Combined Magnet Lattice of the Synchrotron Light Source ISI-800”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR16, pp. 296-298.
[n] R. L. Sheffield and E. J. Pitcher, “The Role of Accelerators in the Energy Problem”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUZRA01, pp. 1314-1318.
[n] C.-S. Fann, J. P. Chiou, K.-B. Liu, and J.-T. Sheu, “Simulation of Kicker Pulser with Matlab Simulink”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH037, pp. 3753-3755.
[n] A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
[n] J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
[n] V. Bharadwaj, S. Peggs, C. Saltmarsh, and G. Wu, “Proposed Data Acquisition System for the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1458-1461.
[n] T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
[n] P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1746-1749.
[n] T. Hoffmann, H. Br?ñuning, and R. Haseitl, “LASSIE: The Large Analogue Signal and Scaling Information Environment for FAIR”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN008, pp. 250-252.
[n] I. Bustinduy et al., “The ESS MEBT RF Buncher Cavities Conditioning Process”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1107-1109. doi:10.18429/JACoW-IPAC2021-MOPAB356
[n] R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
[n] T. Tajima, “Would >50 MV/m be Possible with Superconducting RF Cavities?”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCS1, pp. 2119-2123.
[n] T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2244-2247.
[n] Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
[n] C. Johnstone, D. Bogert, J. Lackey, and R. Tomlin, “Stripping Foil Losses and Space Charge Blowup in the FNAL Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 860-863.
[n] R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
[n] M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1958-1960. doi:10.18429/JACoW-IPAC2019-TUPTS012
[n] M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n] M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 160-163. doi:10.18429/JACoW-IBIC2023-TU3C02
[n] G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
[n] A. Bechtold et al., “The MAFF IH-RFQ Test Stand at the IAP Frankfurt”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS038, pp. 1577-1579.
[n] W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554.
[n] T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 104-107. doi:10.18429/JACoW-IPAC2019-MOPGW017
[n] C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 15-18. doi:10.18429/JACoW-IBIC2022-MOP01
[n] C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710.
[n] S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
[n] K. Beckert, P. Beller, B. Franczak, B. Franzke, F. Nolden, and M. Steck, “Deceleration of Highly Charged Ions in the ESR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B06, pp. 587-589.
[n] J. Long, S. Chemerisov, W. Gai, C. D. Jonah, W. Liu, and H. Wang, “Study on High Flux Accelerator Based Slow Positrons Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN091, pp. 2921-2923.
[n] B. Pl?Âtzeneder, P. Bastl, O. Janda, A. Kru, and J. Trdlicka, “Rethinking PLCs: Industrial Ethernet for Large-Scale Real-Time Distributed Control Applications”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 136-138. doi:10.18429/JACoW-PCaPAC2018-THCA5
[n] G. R. Montoya Soto, C. Duarte Galv?ín, C. A. Valerio, and B. Yee-Rend??n, “Electromagnetic Design and Characterization of an S-band 3-Cell RF Accelerating Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2867-2869. doi:10.18429/JACoW-IPAC2019-WEPRB027
[n] C. H. Chang, M. H. Huang, C. S. Hwang, G. J. Hwang, F. Y. Lin, and P. K. Tseng, “Construction and Measurement of the Bending Magnets for the SRRC Transfer Line”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2241-2244.
[n] M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n] W. Brefeld, R. Brinkmann, and J. Rossbach, “Low Emittance Optic for PETRA II”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 166-169.
[n] B. K. Stillwell et al., “Research and Development on the Storage Ring Vacuum System for the APS Upgrade Project”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 92-95. doi:10.18429/JACoW-NAPAC2016-MOPOB11
[n] D. Alesini, A. Gallo, A. Ghigo, F. Marcellini, M. Serio, and M. Zobov, “HOM Damping in the DAFNE Injection Kickers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B06, pp. 1145-1147.
[n] J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL098, pp. 1950-1953.
- P. Boehler et al., “Experience With the Commissioning of the U15-Undulator for SwissFEL-Aramis Beamline and New Developments for the Athos Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 283-287.
- M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1933-1936.
- R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1344-1347.
- A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
- Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
- I. Karnaukhov, S. Kononenko, A. Shcherbakov, V. Nemoshkalenko, V. Molodkin, and A. Shpak, “A Combined Magnet Lattice of the Synchrotron Light Source ISI-800”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR16, pp. 296-298.
- R. L. Sheffield and E. J. Pitcher, “The Role of Accelerators in the Energy Problem”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUZRA01, pp. 1314-1318.
- C.-S. Fann, J. P. Chiou, K.-B. Liu, and J.-T. Sheu, “Simulation of Kicker Pulser with Matlab Simulink”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH037, pp. 3753-3755.
- A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
- J. R. Cary, “Longitudinal Cooling of a Strongly Magnetized Electron Plasma”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE040, pp. 2026-2028.
- V. Bharadwaj, S. Peggs, C. Saltmarsh, and G. Wu, “Proposed Data Acquisition System for the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1458-1461.
- T. Bertuccio, J. C. Collins, B. Manwaring, G. Mower, J. Tyson, and S. Lewis, “Growth of the IUCF Control System”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-09, pp. 2341-2344.
- P. Stillman et al., “Neutrino Horn Power Supply Operational Experience”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1746-1749.
- T. Hoffmann, H. Br?ñuning, and R. Haseitl, “LASSIE: The Large Analogue Signal and Scaling Information Environment for FAIR”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN008, pp. 250-252.
- I. Bustinduy et al., “The ESS MEBT RF Buncher Cavities Conditioning Process”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1107-1109.
- R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368.
- T. Tajima, “Would >50 MV/m be Possible with Superconducting RF Cavities?”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCS1, pp. 2119-2123.
- T. C. Fan, C. S. Hwang, and P. K. Tseng, “A Simple Magnet Multipole Measurement System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2244-2247.
- Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
- C. Johnstone, D. Bogert, J. Lackey, and R. Tomlin, “Stripping Foil Losses and Space Charge Blowup in the FNAL Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 860-863.
- R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153.
- M. Gro?ƒ et al., “Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1958-1960.
- M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2889-2892.
- M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3C02, pp. 160-163.
- G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148.
- A. Bechtold et al., “The MAFF IH-RFQ Test Stand at the IAP Frankfurt”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS038, pp. 1577-1579.
- W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1551-1554.
- T. Boltz et al., “Feedback Design for Control of the Micro-Bunching Instability based on Reinforcement Learning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 104-107.
- C. Ozkan Loch, R. Ischebeck, N. Samadi, A. M. M. Stampfli, and J. Vila Comamala, “SLS 2.0 ÔÇô Status of the Diagnostics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 15-18.
- C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 707-710.
- S. G. Tantawi, T. G. Lee, R. D. Ruth, A. E. Vlieks, and M. Zolotorev, “Design of a Multi-Megawatt X-Band Solid State Microwave Switch”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ27, pp. 1584-1586.
- K. Beckert, P. Beller, B. Franczak, B. Franzke, F. Nolden, and M. Steck, “Deceleration of Highly Charged Ions in the ESR”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B06, pp. 587-589.
- J. Long, S. Chemerisov, W. Gai, C. D. Jonah, W. Liu, and H. Wang, “Study on High Flux Accelerator Based Slow Positrons Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN091, pp. 2921-2923.
- B. Pl?Âtzeneder, P. Bastl, O. Janda, A. Kru, and J. Trdlicka, “Rethinking PLCs: Industrial Ethernet for Large-Scale Real-Time Distributed Control Applications”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 136-138.
- G. R. Montoya Soto, C. Duarte Galv?ín, C. A. Valerio, and B. Yee-Rend??n, “Electromagnetic Design and Characterization of an S-band 3-Cell RF Accelerating Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2867-2869.
- C. H. Chang, M. H. Huang, C. S. Hwang, G. J. Hwang, F. Y. Lin, and P. K. Tseng, “Construction and Measurement of the Bending Magnets for the SRRC Transfer Line”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2241-2244.
- M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 949.
- W. Brefeld, R. Brinkmann, and J. Rossbach, “Low Emittance Optic for PETRA II”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 166-169.
- B. K. Stillwell et al., “Research and Development on the Storage Ring Vacuum System for the APS Upgrade Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 92-95.
- D. Alesini, A. Gallo, A. Ghigo, F. Marcellini, M. Serio, and M. Zobov, “HOM Damping in the DAFNE Injection Kickers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B06, pp. 1145-1147.
- J. N. Weaver and H. A. Hogg, “Improving the Phase Stability of the SLAC rf Driveline Network for SLC Operation”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2234-2237.
Back to search