Favourites
For Word
[n] M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
[n] G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
[n] N. Butler, M. P. J. Gaudreau, M. K. Kempkes, J. Kinross-Wright, and F. M. Niell, “A Stripline Kicker Driver for the Next Generation Light Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA11, pp. 1250-1252.
[n] S. Fukuda et al., “RF Source of Compact ERL in KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB046, pp. 3981-3983.
[n] C. Ohmori et al., “Synchrotron RF System for JAERI-KEK Joint Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH052, pp. 888-890.
[n] B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1366-1369. doi:10.18429/JACoW-IPAC2022-TUPOTK062
[n] J. Q. Li, K. Fan, and J. Wang, “A Novel Design of a Dielectric-filled Cavity BPM for HUST-PTF”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP029, unpublished.
[n] S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
[n] A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1510-1513.
[n] A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3221-3224. doi:10.18429/JACoW-IPAC2018-THPAK008
[n] J. Harris et al., “A Fast Beam Position Monitor for UMER”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH077, pp. 1387-1389.
[n] M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 624-627. doi:10.18429/JACoW-SRF2019-TUP076
[n] N. Biancacci, K. S. B. Li, E. M?®tral, and B. Salvant, “The HL-LHC Impedance Model and Aspects of Beam Stability”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 606-609. doi:10.18429/JACoW-IPAC2016-MOPOR009
[n] R. W. Shaw et al., “Spallation Neutron Source (SNS) Diamond Stripper Foil Development”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS081, pp. 620-622.
[n] K. Ohmi, Y. Funakoshi, and M. Tawada, “Study of the Beam-Beam Effect for Crab Crossing in KEKB and Super KEKB”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP004, pp. 925-927.
[n] S. S. Chang, J. W. Lee, B. R. Park, S. C. Won, and J. C. Yun, “Real-time data Acquisition and Control System for the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP078L, pp. 1800-1802.
[n] R. Boni, “HOM-free Cavities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
[n] V. Volkov and V. M. Petrov, “Beam Break Up Instability Analysis for Cavities, Linacs and Energy Recovery Linacs”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 537-539. doi:10.18429/JACoW-LINAC2018-TUPO091
[n] C. Wyss, “Status of the LEP Energy Upgrade”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 400-403.
[n] A. Kurtulus et al., “Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4258-4261. doi:10.18429/JACoW-IPAC2021-THPAB235
[n] F. Arteche, S. Sanfilippo, A. Siemko, D. Tommasini, I. Vanenkov, and C. Wyss, “Status of the LHC Short Dipole Model Programme”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A14, pp. 2169-2171.
[n] C. E. Peters, J. Reyna, and D. Stanton, “Asynchronous Driver Evaluation and Development for Digital Systems at the Argonne Tandem Linear Accelerating System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1372. doi:10.18429/JACoW-ICALEPCS2019-WEPHA119
[n] G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
[n] R. A. Kishek, P. G. O'Shea, M. Reiser, C. L. Bohn, I. Haber, and H. Kandrup, “Computational Investigation of Dissipation and Reversibility of Space-Charge Driven Processes in Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA006, pp. 151-153.
[n] N. Butler, M. P. J. Gaudreau, M. K. Kempkes, M. G. Munderville, F. M. Niell, and R. E. Simpson, “Solid-State Pulsed Power System for a Stripline Kicker”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 500-502. doi:10.18429/JACoW-NAPAC2016-TUPOB09
[n] J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2661-2664. doi:10.18429/JACoW-IPAC2019-WEPGW079
[n] M. Esposito, M. Paris, F. Sgamma, S. Tomassini, and M. Troiani, “The Alignment of the SPARC Facility”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC13, pp. 262-264.
[n] R. de Maria et al., “Performance of Exponential Coupler in the SPS with LHC Type Beam for Transverse Broadband Instability Analysis”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD17, pp. 83-85.
[n] R. L. Warnock, G. R. Bart, and S. Fenster, “Longitudinal Stability of a Coasting Beam in a Corrugated Vacuum Chamber”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2580-2583.
[n] G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 589-592.
[n] F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
[n] N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 212-215. doi:10.18429/JACoW-IPAC2018-MOPMF048
[n] R. Tomas, M. Giovannozzi, and R. de Maria, “Non-linear Correction Schemes for the Phase 1 LHC Insertion Region Upgrade and Dynamic Aperture Studies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP024, pp. 2569-2571.
[n] P. Gagliardi, V. Sciutto, F. Terzi, and G. Zoni, “Manufacturing Experience at Ansaldo in Large Scale Production of Superconducting Cavities for LEP-2 Project”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D30, pp. 1081-1089.
[n] I. Roth, M. P. J. Gaudreau, M. K. Kempkes, M. G. Munderville, and R. E. Simpson, “Thyratron Replacement”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 162-164. doi:10.18429/JACoW-NAPAC2016-MOPOB44
[n] R. de Maria, F. Schmidt, and P. K. Skowronski, “Advances in Matching with MAD-X.”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP14, pp. 213-215.
[n] H. Grote, “Self-consistent Orbits with Beam-beam Effect in the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B10, pp. 1202-1204.
[n] J. Neumann et al., “Beam Line Design at the Maryland Infrared Free Electron Laser (MIRFEL)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH124, pp. 2766-2768.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
- G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
- N. Butler, M. P. J. Gaudreau, M. K. Kempkes, J. Kinross-Wright, and F. M. Niell, “A Stripline Kicker Driver for the Next Generation Light Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA11, pp. 1250-1252.
- S. Fukuda et al., “RF Source of Compact ERL in KEK”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB046, pp. 3981-3983.
- C. Ohmori et al., “Synchrotron RF System for JAERI-KEK Joint Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH052, pp. 888-890.
- B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1366-1369.
- J. Q. Li, K. Fan, and J. Wang, “A Novel Design of a Dielectric-filled Cavity BPM for HUST-PTF”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP029, unpublished.
- S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
- A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1510-1513.
- A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3221-3224.
- J. Harris et al., “A Fast Beam Position Monitor for UMER”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH077, pp. 1387-1389.
- M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 624-627.
- N. Biancacci, K. S. B. Li, E. M?®tral, and B. Salvant, “The HL-LHC Impedance Model and Aspects of Beam Stability”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 606-609.
- R. W. Shaw et al., “Spallation Neutron Source (SNS) Diamond Stripper Foil Development”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS081, pp. 620-622.
- K. Ohmi, Y. Funakoshi, and M. Tawada, “Study of the Beam-Beam Effect for Crab Crossing in KEKB and Super KEKB”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP004, pp. 925-927.
- S. S. Chang, J. W. Lee, B. R. Park, S. C. Won, and J. C. Yun, “Real-time data Acquisition and Control System for the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP078L, pp. 1800-1802.
- R. Boni, “HOM-free Cavities”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01A, pp. 182-186.
- V. Volkov and V. M. Petrov, “Beam Break Up Instability Analysis for Cavities, Linacs and Energy Recovery Linacs”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 537-539.
- C. Wyss, “Status of the LEP Energy Upgrade”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 400-403.
- A. Kurtulus et al., “Detailed Electromagnetic Characterisation of HL-LHC Low Impedance Collimators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4258-4261.
- F. Arteche, S. Sanfilippo, A. Siemko, D. Tommasini, I. Vanenkov, and C. Wyss, “Status of the LHC Short Dipole Model Programme”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A14, pp. 2169-2171.
- C. E. Peters, J. Reyna, and D. Stanton, “Asynchronous Driver Evaluation and Development for Digital Systems at the Argonne Tandem Linear Accelerating System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1372.
- G. Feng et al., “Lattice Design and Beam Lifetime Study for HLS St01orage Ring Upgrade Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA042, pp. 2585-2587.
- R. A. Kishek, P. G. O'Shea, M. Reiser, C. L. Bohn, I. Haber, and H. Kandrup, “Computational Investigation of Dissipation and Reversibility of Space-Charge Driven Processes in Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA006, pp. 151-153.
- N. Butler, M. P. J. Gaudreau, M. K. Kempkes, M. G. Munderville, F. M. Niell, and R. E. Simpson, “Solid-State Pulsed Power System for a Stripline Kicker”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 500-502.
- J. T. M. Chrin, M. Aiba, and J. Snuverink, “A Channel Access Software Platform for Beam Dynamics Applications in Scripting Languages”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2661-2664.
- M. Esposito, M. Paris, F. Sgamma, S. Tomassini, and M. Troiani, “The Alignment of the SPARC Facility”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC13, pp. 262-264.
- R. de Maria et al., “Performance of Exponential Coupler in the SPS with LHC Type Beam for Transverse Broadband Instability Analysis”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD17, pp. 83-85.
- R. L. Warnock, G. R. Bart, and S. Fenster, “Longitudinal Stability of a Coasting Beam in a Corrugated Vacuum Chamber”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2580-2583.
- G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 589-592.
- F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
- N. Fuster-Martinez et al., “Aperture Measurements with AC Dipole at the Large Hadron Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 212-215.
- R. Tomas, M. Giovannozzi, and R. de Maria, “Non-linear Correction Schemes for the Phase 1 LHC Insertion Region Upgrade and Dynamic Aperture Studies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP024, pp. 2569-2571.
- P. Gagliardi, V. Sciutto, F. Terzi, and G. Zoni, “Manufacturing Experience at Ansaldo in Large Scale Production of Superconducting Cavities for LEP-2 Project”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D30, pp. 1081-1089.
- I. Roth, M. P. J. Gaudreau, M. K. Kempkes, M. G. Munderville, and R. E. Simpson, “Thyratron Replacement”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 162-164.
- R. de Maria, F. Schmidt, and P. K. Skowronski, “Advances in Matching with MAD-X.”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP14, pp. 213-215.
- H. Grote, “Self-consistent Orbits with Beam-beam Effect in the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B10, pp. 1202-1204.
- J. Neumann et al., “Beam Line Design at the Maryland Infrared Free Electron Laser (MIRFEL)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH124, pp. 2766-2768.
Back to search