Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. I. Wawrzyniak et al., “Solaris Storage Ring Performance After 6 Years of Operation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1515-1517. doi:10.18429/JACoW-IPAC2021-TUPAB065
[n] I. E. Campisi, K. E. Finger, A. M. Johnson, and L. K. Summers, “Higher-Order-Mode Damping and Microwave Absorption at 2K”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1237-1240.
[n] J. S. Lundquist, N. Milas, E. Nilsson, and S. Werin, “ESS DTL Tuning Using Machine Learning Methods”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1872-1875. doi:10.18429/JACoW-IPAC2021-TUPAB198
[n] T. K. Khoe and J. J. Livingood, “A Decade of Progress in Cyclotrons - - Frequency Modulated and Isochronous”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 23-29.
[n] P. Cailliau et al., “Cold Cathode Ion Source for IBA CYCLONE?«230”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 164-166. doi:10.18429/JACoW-Cyclotrons2016-TUP02
[n] M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 724-727. doi:10.18429/JACoW-IPAC2022-MOPOMS040
[n] T. Summers, D. Chabot, L. O. Dallin, and M. J. Sigrist, “Orbit Improvements at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP018, pp. 1129-1131.
[n] M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 47-50. doi:10.18429/JACoW-NAPAC2019-MOYBB6
[n] M. Matsuoka et al., “RF Power Coupler for Prototype Cryomodule at JAERI”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ004, pp. XX-XX.
[n] K.-H. Hsu, C.-S. Chen, C.-K. Kuan, and W.-Y. Lai, “Reducing floor vibration of TPS experimental hall caused by air handling units”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1005-1007. doi:10.18429/JACoW-IPAC2023-MOPM014
[n] K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 496-498. doi:10.18429/JACoW-RUPAC2016-WEPSB059
[n] J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1883-1886.
[n] K. Kostro, J. Andersson, F. Di Maio, S. Jensen, and N. Trofimov, “The Controls Middleware (CMW) at CERN - Status and Usage”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE201, pp. XX-XX.
[n] T. Hoffmann, G. Jan?ía, and M. Schwickert, “FESA at FAIR - The Front-End Software Architecture”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP009, pp. 4794-4796.
[n] V. S. Kashikhin et al., “Conceptual Design of Large-Bore Superconducting Quadrupoles with Active Magnetic Shielding for the AHF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE014, pp. 1966-1968.
[n] S. M. Elliott, E. K. White, and J. Simkin, “Kinetic Plasma Simulation of Ion Beam Extraction from an ECR Ion Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper THCOAK02, pp. 194-196.
[n] G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
[n] W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
[n] M. Gusarova, I. I. Petrushina, and V. Zvyagintsev, “Multipactor Discharge in eLINAC Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA020, pp. 287-289.
[n] T. Hamelin, M. Chabot, J.-L. Coacolo, J. Lesrel, and G. Martinet, “MUSICC3D: a Code for Modeling the Multipacting”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP092, pp. 683-685.
[n] A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_005.
[n] K. Howard, M. Liepe, and Z. Sun, “Thermal Annealing of Sputtered Nb3Sn and V3Si Thin Films for Superconducting RF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 82. doi:10.18429/JACoW-SRF2021-SUPFDV009
For LaTeX
Use Complete Form
For BibTeX
References
- A. I. Wawrzyniak et al., “Solaris Storage Ring Performance After 6 Years of Operation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1515-1517.
- I. E. Campisi, K. E. Finger, A. M. Johnson, and L. K. Summers, “Higher-Order-Mode Damping and Microwave Absorption at 2K”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1237-1240.
- J. S. Lundquist, N. Milas, E. Nilsson, and S. Werin, “ESS DTL Tuning Using Machine Learning Methods”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1872-1875.
- T. K. Khoe and J. J. Livingood, “A Decade of Progress in Cyclotrons - - Frequency Modulated and Isochronous”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 23-29.
- P. Cailliau et al., “Cold Cathode Ion Source for IBA CYCLONE?«230”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 164-166.
- M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 724-727.
- T. Summers, D. Chabot, L. O. Dallin, and M. J. Sigrist, “Orbit Improvements at the Canadian Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP018, pp. 1129-1131.
- M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 47-50.
- M. Matsuoka et al., “RF Power Coupler for Prototype Cryomodule at JAERI”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ004, pp. XX-XX.
- K.-H. Hsu, C.-S. Chen, C.-K. Kuan, and W.-Y. Lai, “Reducing floor vibration of TPS experimental hall caused by air handling units”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM014, pp. 1005-1007.
- K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 496-498.
- J. Norem, M. Knott, and A. Rauchas, “Beam Stabillity in a 6 GeV Synchrotron Light Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1883-1886.
- K. Kostro, J. Andersson, F. Di Maio, S. Jensen, and N. Trofimov, “The Controls Middleware (CMW) at CERN - Status and Usage”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE201, pp. XX-XX.
- T. Hoffmann, G. Jan?ía, and M. Schwickert, “FESA at FAIR - The Front-End Software Architecture”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP009, pp. 4794-4796.
- V. S. Kashikhin et al., “Conceptual Design of Large-Bore Superconducting Quadrupoles with Active Magnetic Shielding for the AHF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE014, pp. 1966-1968.
- S. M. Elliott, E. K. White, and J. Simkin, “Kinetic Plasma Simulation of Ion Beam Extraction from an ECR Ion Source”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper THCOAK02, pp. 194-196.
- G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128.
- W. Coosemans et al., “Determination of the Accuracy of Wire Position Sensors”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B08, pp. 406-408.
- M. Gusarova, I. I. Petrushina, and V. Zvyagintsev, “Multipactor Discharge in eLINAC Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA020, pp. 287-289.
- T. Hamelin, M. Chabot, J.-L. Coacolo, J. Lesrel, and G. Martinet, “MUSICC3D: a Code for Modeling the Multipacting”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP092, pp. 683-685.
- A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_005.
- K. Howard, M. Liepe, and Z. Sun, “Thermal Annealing of Sputtered Nb3Sn and V3Si Thin Films for Superconducting RF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 82.
Back to search