Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] U. Tallgren, P. Tetu, and A. Van Der Schueren, “Computer Controlled Energy Spread Measurement at the CERN PS Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 844-848.
[n] A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 548-550. doi:10.18429/JACoW-IPAC2017-MOPIK022
[n] E. Y. Wildner et al., “Final Geometry of 1232 LHC Dipoles”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN086, pp. 359-361.
[n] J.-Y. Hemery and D. J. Simon, “The LEAR Experimental Areas”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1527-1530.
[n] Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 318-320.
[n] V. Chouhan et al., “Latest Development of Electropolishing Optimization for 650 MHz Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 512-516. doi:10.18429/JACoW-SRF2023-TUPTB042
[n] S. P. Zhang, J. Y. Li, and C. Meng, “Bunching System Optimization Based on MOGA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1018-1020. doi:10.18429/JACoW-IPAC2019-MOPTS073
[n] M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 701-705. doi:10.18429/JACoW-ICALEPCS2017-TUPHA125
[n] G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
[n] D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
[n] M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO02, pp. 278-281. doi:10.18429/JACoW-CYCLOTRONS2022-THBO02
[n] A. Z. Babaian et al., “The Regional Center for Proton Therapy on the Basis of Yerevan Electron Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2613-2616.
[n] J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
[n] W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
[n] D. E. Suddeth and G. J. Volk, “The Rapid Cycling Synchrotron Extraction Kicker Magnet Drive System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3017-3020.
[n] O. V. Sinitsyn, T. M. Antonsen, R. A. Kishek, and G. S. Nusinovich, “Self-Consistent Non-Stationary Model for Multipactor Analysis in Dielectric-Loaded Accelerator Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP098, pp. 4532-4534.
[n] Yu. G. Basargin et al., “103-cm Compact Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 102-107.
[n] M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 921-924. doi:10.18429/JACoW-IPAC2019-MOPTS032
[n] A. J. Dick and P. Piot, “Electron Beam Shaping Techniques Using Optical Stochastic Cooling”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2303-2306. doi:10.18429/JACoW-IPAC2022-WEPOMS028
[n] A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
[n] E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1584-1587.
[n] Y. Kojima, “Recent Results on Superconducting Cavities at KEK”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-5, pp. XX-XX.
[n] M. Schmoekel, A. Matheisen, B. Petersen, N. Steinhau-Kuehl, and H. Weitkamper, “Update on EP Experiences at DESY with the Electro Polishing Process at DESY 1.3 GHz”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP31, pp. XX-XX.
[n] F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1398-1401.
[n] P. Kneisel, “Clean Work and its Consequences - Contamination Control Considerations”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-28, pp. XX-XX.
[n] L. J. Lagin et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOAAB01, pp. 483-486.
[n] L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
[n] G. Stange, “An Inexpensive Positrom Converter of High Reliability and High Yield”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4146-4149.
[n] L. Wang et al., “The Transport Line Upgrade Proposal of Hefei Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC066, pp. 2145-2147.
[n] H. S. Chang et al., “Negative Hydrogen Acceleration in the Cyclone-30 at KIRAMS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10007, pp. XX-XX.
[n] K. I. Kuzmenkov et al., “Production of Intense Metal Ion Beams at the DC-60 Cyclotron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 504-506. doi:10.18429/JACoW-RUPAC2018-THPSC50
[n] S. K. Esin et al., “Moscow Meson Factory Linac Status Report”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper FR1-02, pp. 830-832.
[n] J. F. DeFord, “Theoretical/Numerical Investigation of Induction Cavity Impedances for Moderate to Large Gap Widths”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU427, pp. 375-377.
[n] L. Calabretta, A. Angelov, G. Ciavola, G. Cuttone, D. Larson, and V. Scuderi, “The TANDEM Injector for the Superconducting Cyclotron at L. N. S.”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 497-500.
[n] D. Chernin and A. Mondelli, “The Scaling of Linear Supercolliders Using Modified SLAC Structures”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 148-151.
[n] K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 496-498. doi:10.18429/JACoW-RUPAC2016-WEPSB059
[n] M. Boussoukaya, H. Bergeret, R. Chehab, B. Leblond, and J. Leduff, “High Emissivity Photocathodes”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 994-997.
[n] R. Cappi and J. P. Riunaud, “Trapped Ion Effects with Electrons Beams in the CERN PS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1636-1639.
[n] G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934.
[n] Y. P. Sun and M. Borland, “Optimizations of Nonlinear Beam Dynamics Performance on APS-U Lattice”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1276-1279. doi:10.18429/JACoW-IPAC2018-TUPMF013
[n] D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3298-3300. doi:10.18429/JACoW-IPAC2014-THPME035
[n] D. Alesini, J. F. DeFord, V. A. Dolgashev, A. Ghigo, F. Marcellini, and G. McMonagle, “The New RF Deflectors for the CTF3 Combiner Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1PBC04, pp. 1812-1814.
[n] D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
[n] A. I. Kvasha, A. Feschenko, and V. L. Serov, “Status of INR DTL RF System”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA022, pp. 293-295.
[n] Y. B. Yan, J. G. Ding, G. Y. Jiang, Y. B. Leng, and J. F. Chen, “The Control System Design of SCLF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4800-4802. doi:10.18429/JACoW-IPAC2018-THPML069
[n] J.-L. Mi et al., “AGS Tune Jump Power Supply Design and Test”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP253, pp. 1298-1300.
For LaTeX
Use Complete Form
For BibTeX
References
- U. Tallgren, P. Tetu, and A. Van Der Schueren, “Computer Controlled Energy Spread Measurement at the CERN PS Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 844-848.
- A. Lueangaramwong et al., “Experimental Investigation of Field-Emission From Silicon Nano-Cone Cathodes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 548-550.
- E. Y. Wildner et al., “Final Geometry of 1232 LHC Dipoles”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN086, pp. 359-361.
- J.-Y. Hemery and D. J. Simon, “The LEAR Experimental Areas”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1527-1530.
- Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 318-320.
- V. Chouhan et al., “Latest Development of Electropolishing Optimization for 650 MHz Cavity”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB042, pp. 512-516.
- S. P. Zhang, J. Y. Li, and C. Meng, “Bunching System Optimization Based on MOGA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1018-1020.
- M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 701-705.
- G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
- D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
- M. Z. Zhang et al., “SAPT- A Synchrotron Based Proton Therapy”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO02, pp. 278-281.
- A. Z. Babaian et al., “The Regional Center for Proton Therapy on the Basis of Yerevan Electron Synchrotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2613-2616.
- J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
- W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
- D. E. Suddeth and G. J. Volk, “The Rapid Cycling Synchrotron Extraction Kicker Magnet Drive System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3017-3020.
- O. V. Sinitsyn, T. M. Antonsen, R. A. Kishek, and G. S. Nusinovich, “Self-Consistent Non-Stationary Model for Multipactor Analysis in Dielectric-Loaded Accelerator Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP098, pp. 4532-4534.
- Yu. G. Basargin et al., “103-cm Compact Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 102-107.
- M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 921-924.
- A. J. Dick and P. Piot, “Electron Beam Shaping Techniques Using Optical Stochastic Cooling”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2303-2306.
- A. H. Lumpkin, Y. L. Li, S. J. Pasky, and N. Sereno, “Observations on COTR Due to the Microbunching Instability in Compressed Beams”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC47, pp. 352-355.
- E. Hoyer, J. Chin, and W. V. Hassenzahl, “Flux Shunts for Undulators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1584-1587.
- Y. Kojima, “Recent Results on Superconducting Cavities at KEK”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-5, pp. XX-XX.
- M. Schmoekel, A. Matheisen, B. Petersen, N. Steinhau-Kuehl, and H. Weitkamper, “Update on EP Experiences at DESY with the Electro Polishing Process at DESY 1.3 GHz”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP31, pp. XX-XX.
- F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1398-1401.
- P. Kneisel, “Clean Work and its Consequences - Contamination Control Considerations”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-28, pp. XX-XX.
- L. J. Lagin et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOAAB01, pp. 483-486.
- L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
- G. Stange, “An Inexpensive Positrom Converter of High Reliability and High Yield”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4146-4149.
- L. Wang et al., “The Transport Line Upgrade Proposal of Hefei Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC066, pp. 2145-2147.
- H. S. Chang et al., “Negative Hydrogen Acceleration in the Cyclone-30 at KIRAMS”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10007, pp. XX-XX.
- K. I. Kuzmenkov et al., “Production of Intense Metal Ion Beams at the DC-60 Cyclotron”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 504-506.
- S. K. Esin et al., “Moscow Meson Factory Linac Status Report”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper FR1-02, pp. 830-832.
- J. F. DeFord, “Theoretical/Numerical Investigation of Induction Cavity Impedances for Moderate to Large Gap Widths”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU427, pp. 375-377.
- L. Calabretta, A. Angelov, G. Ciavola, G. Cuttone, D. Larson, and V. Scuderi, “The TANDEM Injector for the Superconducting Cyclotron at L. N. S.”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 497-500.
- D. Chernin and A. Mondelli, “The Scaling of Linear Supercolliders Using Modified SLAC Structures”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 148-151.
- K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 496-498.
- M. Boussoukaya, H. Bergeret, R. Chehab, B. Leblond, and J. Leduff, “High Emissivity Photocathodes”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 994-997.
- R. Cappi and J. P. Riunaud, “Trapped Ion Effects with Electrons Beams in the CERN PS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1636-1639.
- G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 931-934.
- Y. P. Sun and M. Borland, “Optimizations of Nonlinear Beam Dynamics Performance on APS-U Lattice”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1276-1279.
- D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3298-3300.
- D. Alesini, J. F. DeFord, V. A. Dolgashev, A. Ghigo, F. Marcellini, and G. McMonagle, “The New RF Deflectors for the CTF3 Combiner Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1PBC04, pp. 1812-1814.
- D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
- A. I. Kvasha, A. Feschenko, and V. L. Serov, “Status of INR DTL RF System”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA022, pp. 293-295.
- Y. B. Yan, J. G. Ding, G. Y. Jiang, Y. B. Leng, and J. F. Chen, “The Control System Design of SCLF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4800-4802.
- J.-L. Mi et al., “AGS Tune Jump Power Supply Design and Test”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP253, pp. 1298-1300.
Back to search