Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 369-373. doi:10.18429/JACoW-IBIC2025-TUPCO10
[n] U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 123-126.
[n] M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n] P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 250-252. doi:10.18429/JACoW-IPAC2017-MOPAB061
[n] B. Mustapha, S. V. Kutsaev, J. A. Nolen, and P. N. Ostroumov, “A Compact Linac Design for an Accelerator Driven System”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP003, pp. 52-54.
[n] M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
[n] I. Roth et al., “Long Pulse Solid-State Pulsed Power Systems Built to ESS Specifications”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 165-166. doi:10.18429/JACoW-NAPAC2016-MOPOB46
[n] D. S. Zhang, M. Li, C. Wang, J. J. Yang, and T. J. Zhang, “Physical Design of the Extraction Trim-Rods in a 230 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 61-63. doi:10.18429/JACoW-Cyclotrons2016-MOP06
[n] J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
[n] D. Schrage et al., “A Flight-Qualified RFQ for the BEAR Project”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-08, pp. 54-57.
[n] V. V. Balakin, D. E. Berkaev, V. M. Borin, F. A. Emanov, and O. I. Meshkov, “Longitudinal Beam Measuruments on Damping Ring BINP's Injection Complex With New Resonator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 453-455. doi:10.18429/JACoW-RUPAC2018-THPSC22
[n] K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
[n] H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
[n] M. G. Billing, M. Liepe, V. D. Shemelin, and N. R. A. Valles, “Beam Position Monitor within the Cornell Energy Recovery Linac Cavity Assembly”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA070, pp. 840-842.
[n] L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2067-2070. doi:10.18429/JACoW-IPAC2019-TUPTS065
[n] K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
[n] K. L. F. Bane et al., “Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP126, pp. 351-354.
[n] W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
[n] T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
[n] S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
[n] B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 444-447.
[n] P. Dhakal, “Thermodynamic Properties of Srf Niobium”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 884-887. doi:10.18429/JACoW-SRF2023-WEPWB125
[n] F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1626-1629. doi:10.18429/JACoW-IPAC2018-TUPML039
[n] V. Rybnikov and A. Sulc, “A Data Acquisition Middle Layer Server with Python Support for Linac Operation and Experiments Monitoring and Control”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1330-1334. doi:10.18429/JACoW-ICALEPCS2023-THPDP017
[n] N. I. Andreev et al., “Development and Study of the UNK Superconducting Quadrupole Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2280-2283.
[n] Y. Mori, “The Design and R&D Works for the 50-GeV Synchrotron of Japan Hadron Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D001, pp. 375-377.
[n] F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
[n] D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3662-3665. doi:10.18429/JACoW-IPAC2017-THOBB1
[n] T. Kobayashi et al., “HOM Characteristics of the ARES Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P043, pp. 3069-3071.
[n] K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
[n] W. S. Graves et al., “Ultrashort Electron Bunch Length Measurements at DUVFEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH058, pp. 2224-2226.
[n] P. He et al., “Accurate offline calibration and simulation analysis of various types of BPM position sensitivity”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPCO35, unpublished.
[n] N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1017-1020.
[n] S. V. Barabin et al., “Emittance Measurement on Krion-6T Ion Source by Pepper-Pot Method”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 207-210. doi:10.18429/JACoW-RUPAC2018-TUPSA29
[n] V. Chetvertkova et al., “MadX Tracking Simulations to Determine the Beam loss Distributions for the LHC Quench Tests with ADT Excitation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3991-3994. doi:10.18429/JACoW-IPAC2014-THPRI094
[n] Y. M. Pischalnikov et al., “Modified Slow Tuner Design for Cavity 1 Inside LCLS II Cryomodules”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2684-2686. doi:10.18429/JACoW-IPAC2018-WEPML006
[n] P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 38-40. doi:10.18429/JACoW-FEL2019-TUP001
[n] M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1693-1695. doi:10.18429/JACoW-IPAC2015-TUPJE037
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] Z. Liu, T. Russo, R. C. Webber, Y. Yamazaki, and Y. Zhang, “Beam Loss Monitor System for Low-Energy Heavy-Ion FRIB Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC46, pp. 186-188.
[n] H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
[n] K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1766-1768. doi:10.18429/JACoW-IPAC2016-TUPOW011
[n] T. Honda et al., “Beam Transport Lines of the KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B05, pp. 2249-2251.
[n] A. V. Petrenko and K. V. Astrelina, “Measurement of Beam Parameters in the VEPP-5 Damping Ring Using Betatron Oscillations Decoherence”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB031, pp. 385-387.
[n] A. V. Velez, H.-W. Glock, J. Knobloch, and A. Neumann, “Hom Damping Optimization Design Studies for BESSY VSR Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2774-2776. doi:10.18429/JACoW-IPAC2015-WEPMA013
For LaTeX
Use Complete Form
For BibTeX
References
- N. Vitoratou and L. Bobb, “Overview of the pinhole camera design for the Diamond-II upgrade”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 369-373.
- U. Schaaf et al., “Impedances and Instability Studies at the ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 123-126.
- M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 841-843.
- P. Valente, B. Buonomo, D. G. C. Di Giulio, and L. G. Foggetta, “DANE BTF Improvements of the Transverse Beam Diagnostics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 250-252.
- B. Mustapha, S. V. Kutsaev, J. A. Nolen, and P. N. Ostroumov, “A Compact Linac Design for an Accelerator Driven System”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP003, pp. 52-54.
- M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
- I. Roth et al., “Long Pulse Solid-State Pulsed Power Systems Built to ESS Specifications”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 165-166.
- D. S. Zhang, M. Li, C. Wang, J. J. Yang, and T. J. Zhang, “Physical Design of the Extraction Trim-Rods in a 230 MeV Superconducting Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 61-63.
- J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
- D. Schrage et al., “A Flight-Qualified RFQ for the BEAR Project”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-08, pp. 54-57.
- V. V. Balakin, D. E. Berkaev, V. M. Borin, F. A. Emanov, and O. I. Meshkov, “Longitudinal Beam Measuruments on Damping Ring BINP's Injection Complex With New Resonator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 453-455.
- K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
- H. Tian, M. Kelley, C. Reece, L. Plucinski, K. Smith, and S. Wang, “Surface Studies of Niobium Chemically Polished Under Conditions for SRF Cavity Production”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA10, pp. 193-193.
- M. G. Billing, M. Liepe, V. D. Shemelin, and N. R. A. Valles, “Beam Position Monitor within the Cornell Energy Recovery Linac Cavity Assembly”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA070, pp. 840-842.
- L. S. Cowie and D. J. Scott, “RF Conditioning of the CLARA 400 Hz Photoinjector”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2067-2070.
- K. Tinschert, R. Lang, J. Maeder, J. Rossbach, P. Spaedtke, and A. Yakushev, “Ion Beam Production from Rare Isotopes with GSI ECR Ion Sources”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-14, pp. 97-101.
- K. L. F. Bane et al., “Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP126, pp. 351-354.
- W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
- T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
- S. Lueders, “STUXNET and the Impact on Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT02, pp. 1285-1288.
- B. Franzke et al., “Performance of the Heavy Ion Storage Ring ESR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 444-447.
- P. Dhakal, “Thermodynamic Properties of Srf Niobium”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB125, pp. 884-887.
- F. Mayet, R. W. Assmann, U. Dorda, and W. Kuropka, “First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1626-1629.
- V. Rybnikov and A. Sulc, “A Data Acquisition Middle Layer Server with Python Support for Linac Operation and Experiments Monitoring and Control”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP017, pp. 1330-1334.
- N. I. Andreev et al., “Development and Study of the UNK Superconducting Quadrupole Magnet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2280-2283.
- Y. Mori, “The Design and R&D Works for the 50-GeV Synchrotron of Japan Hadron Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D001, pp. 375-377.
- F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
- D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3662-3665.
- T. Kobayashi et al., “HOM Characteristics of the ARES Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P043, pp. 3069-3071.
- K. A. Thompson, T. Himel, S. Moore, L. Sanchez-Chopitea, and H. Shoaee, “Operational Experience with Model-Based Steering in the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1675-1678.
- W. S. Graves et al., “Ultrashort Electron Bunch Length Measurements at DUVFEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH058, pp. 2224-2226.
- P. He et al., “Accurate offline calibration and simulation analysis of various types of BPM position sensitivity”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper WEPCO35, unpublished.
- N. V. Vasiliev, A. A. Glazov, V. A. Kochkin, D. L. Novikov, and E. N. Zaplatin, “Prototype of the Accelerating Resonator for the Superconducting Sector Deuteron Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1017-1020.
- S. V. Barabin et al., “Emittance Measurement on Krion-6T Ion Source by Pepper-Pot Method”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 207-210.
- V. Chetvertkova et al., “MadX Tracking Simulations to Determine the Beam loss Distributions for the LHC Quench Tests with ADT Excitation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3991-3994.
- Y. M. Pischalnikov et al., “Modified Slow Tuner Design for Cavity 1 Inside LCLS II Cryomodules”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2684-2686.
- P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 38-40.
- M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1693-1695.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- Z. Liu, T. Russo, R. C. Webber, Y. Yamazaki, and Y. Zhang, “Beam Loss Monitor System for Low-Energy Heavy-Ion FRIB Accelerators”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC46, pp. 186-188.
- H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
- K. Takahashi et al., “Profile Measurements of Bremsstrahlung Gamma-Rays from Tungsten Plates for Radioactive Isotope Production via Photonuclear Reaction using a 60 MeV Electron Linac”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1766-1768.
- T. Honda et al., “Beam Transport Lines of the KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B05, pp. 2249-2251.
- A. V. Petrenko and K. V. Astrelina, “Measurement of Beam Parameters in the VEPP-5 Damping Ring Using Betatron Oscillations Decoherence”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB031, pp. 385-387.
- A. V. Velez, H.-W. Glock, J. Knobloch, and A. Neumann, “Hom Damping Optimization Design Studies for BESSY VSR Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2774-2776.
Back to search