Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Choi et al., “Upgrade of Corrector Power Supplies for Pohang Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA13, pp. 342-344.
[n] R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
[n] H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
[n] G. H. Neuschaefer, T. S. Bhatia, J. H. Billen, S. Nath, and J. M. Watson, “SSC Drift Tube Linac Physics Design”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU418, pp. 351-354.
[n] V. Litvinenko et al., “High Gain FEL Amplification of Charge Modulation Caused by a Hadron”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH026, pp. 51-54.
[n] G.-Y. Hsiung, C.-M. Cheng, and R. Valizadeh, “Measurement of the Photoelectron Yield from the Synchrotron Radiation for the NEG-coated Tubes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4294-4297. doi:10.18429/JACoW-IPAC2023-THPA145
[n] K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
[n] T. Maruta, M. Ikegami, A. Miura, G. H. Wei, and H. Sako, “Longitudinal Beam Profile Measurement at J-PARC Separated Drift Tube Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC100, pp. 1245-1247.
[n] Y. Sun et al., “Study with One Global Crab Cavity at IR4 for LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP020, pp. 2528-2530.
[n] B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1941-1946. doi:10.18429/JACoW-ICALEPCS2017-THPHA214
[n] J. P. Blewett, “Bunchers”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
[n] D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2792-2795. doi:10.18429/JACoW-IPAC2016-WEPOR053
[n] C. Zhang et al., “From EUROTRANS to MAX: New Strategies and Approaches for the Injector Development”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS043, pp. 2583-2585.
[n] B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
[n] S. K. Sharma, “A Girder-Free Magnet Support System Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 236-238. doi:10.18429/JACoW-MEDSI2016-TUPE32
[n] A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
[n] J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3785-3787. doi:10.18429/JACoW-IPAC2023-WEPM090
[n] P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
[n] I. M. Kapchinskiy, “Choice of the Block-Scheme of 1-1.5 GeV 300 mA Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH466, pp. 776-777.
[n] A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
[n] T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 792-794. doi:10.18429/JACoW-LINAC2016-THPRC012
[n] G. Iadarola et al., “Xsuite: an integrated beam physics simulation framework”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2623-2626. doi:10.18429/JACoW-IPAC2024-WEPR56
[n] C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
[n] J. P. Koutchouk, “Self-compensation of the LEP Distributed Skew Gradient”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 702-705.
[n] L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3912-3914. doi:10.18429/JACoW-IPAC2019-THPRB044
[n] Z. Zhang, C.-X. Tang, and H. J. Qian, “A Spatially Separated Two Frequency RF Gun Design for Beam Brightness Improvement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2572-2575. doi:10.18429/JACoW-IPAC2016-WEPMY013
[n] T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1451-1454.
[n] M. Guthoff, “Design and Experiences with the Beam Condition Monitor as Protection System in the CMS Experiment of the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD42, pp. 398-400.
[n] D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
[n] Y. W. Parc, M. S. Chae, J. H. Hong, and I. S. Ko, “Simulation Study on Emittance Increase due to RF Asymmetry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE038, pp. 2224-2226.
[n] S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
[n] J. L. Hirshfield, T. C. Marshall, S. V. Shchelkunov, and G. V. Sotnikov, “A Fast Kicker Using a Rectangular Dielectric Wakefield Accelerator Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2RAC03, pp. 4267-4269.
[n] R. P. Johnson and S. A. Bogacz, “Linacs for Future Muon Facilities”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR202, pp. 1119-1123.
[n] A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 445-448. doi:10.18429/JACoW-IPAC2018-MOPML023
[n] J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1905-1908.
[n] T. P. Wangler, T. S. Bhatia, T. E. Blue, R. A. Gahbauer, J. E. Stovall, and C. K. C. Wang, “Conceptual Design of an RFQ Accelerator-Based Neutron Source for Boron Neutron-Capture Therapy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 678-681.
[n] A. Mosnier, “The IFMIF 5 MW Linacs”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR201, pp. 1114-1118.
[n] A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 89-91. doi:10.18429/JACoW-HIAT2018-TUOXA01
[n] H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 722-724. doi:10.18429/JACoW-LINAC2024-THPB042
[n] H. Sakai et al., “Operational Experience of CW SRF Injector and Main Linac Cryomodules at the Compact ERL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 63-66. doi:10.18429/JACoW-ERL2015-WEIBLH2054
[n] H. L. Luo, H. Hao, X. Q. Wang, and Y. C. Xu, “Beam Optics and Magnet Design of Helium Ion FFAG Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD026, pp. 4331-4333.
[n] D. L. Turner, “New Methods for Dispersion Measurement and Correction for 12 GeV CEBAF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4882-4884. doi:10.18429/JACoW-IPAC2018-THPML094
[n] A. Khan, S. K. Sharma, and V. V. Smaluk, “Review of Alignment and Stability Tolerances for Advanced Light Sources”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 588-591. doi:10.18429/JACoW-IPAC2022-MOPOTK054
[n] R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
[n] Yu. A. Kubyshin, A. V. Poseryaev, J. P. Rigla, and V. I. Shvedunov, “Analytic Description of the Phase Slip Effect in Race-Track Microtrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN063, pp. 3369-3371.
[n] L. Sanfelici, H. O. C. Duarte, and S. R. Marques, “Design and Impedance Optimization of the LNLS-UVX Longitudinal Kicker Cavity”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC08, pp. 369-372.
[n] T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3421-3424. doi:10.18429/JACoW-IPAC2015-WEPTY063
[n] S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
[n] V. V. Khankin, N. I. Pakhomov, V. I. Shvedunov, A. I. Karev, and V. G. Raevsky, “Operational Experience with 55 MeV Pulsed RTM”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC047, pp. 538-540.
[n] Z. Zhang and H. Wang, “The Magnetic Measurement of Enhancer-Dipole Magnet for CEPC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2866-2868. doi:10.18429/JACoW-IPAC2018-WEPML076
[n] M. Grieser et al., “Recent Developments at the Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 152-155.
[n] R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
[n] J. H. Ormrod, “Overview of Superconducting Cyclotron Projects”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2062-2067.
[n] T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
[n] S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
[n] A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
[n] J. C. Yoon, J. Choi, K. M. Ha, J. H. Kim, J. M. Kim, and J.-W. Lee, “EPICS Based Control System for the KOMAC RF System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT071, pp. 716-718.
[n] A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
[n] A. Narayan, Y. Kang, J. Moss, H. Ren, S.-W. Lee, and G. Toby, “RF Tuning for the SNS LINAC RFQ”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA128, unpublished.
[n] G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
[n] J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
[n] D. S. Yurov, A. S. Alimov, B. S. Ishkanov, V. P. Sakharov, N. I. Pakhomov, and V. I. Shvedunov, “Industrial Prototype of Compact CW Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB39, pp. 248-250.
[n] C. K. Kuan et al., “General Design of ID Front Ends in the TPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4601-4603. doi:10.18429/JACoW-IPAC2017-THPVA068
[n] G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
[n] C. Benvenuti, S. Calatroni, M. Hauer, G. Orlandi, and F. Scalambrin, “Niobium Coatings for 1.5 GHz RF Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I15, pp. XX-XX.
[n] V. M. Borovikov et al., “System of NMR Measurement and Stabilization of Magnetic Field in Superconducting Wiggler at BESSY II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A06, pp. 2474-2476.
[n] A. Puntambekar et al., “Single-cell SC Cavity Development in India”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOA07, pp. 659-662.
[n] S. L. Bogomolov et al., “Development of Compact 2.45 GHz ECR Ion Source for Generation of Singly-Charged Ions”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 202-206. doi:10.18429/JACoW-ECRIS2018-THC4
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Theoretical Formulation of Improved SASE FEL Based on Slippage Enhancement Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4398-4401. doi:10.18429/JACoW-IPAC2018-THPMK051
[n] R. Calaga, “ERL 5-Cell Cavity Design for High Currents”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA07, pp. 188-188.
[n] J. M. Bogaty, “Development of Low Level Beam Diagnostics for Polarized Proton Operation in the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1762-1765.
[n] J. E. Stovall, “Alignment and Steering Scenarios for the APT Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP18, pp. 686-688.
[n] V. K. Plotnikov, “Engineering Design of ITEP Proton Linac for Nuclear Waste Transmutation”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP80, pp. 252-254.
[n] J. P. Koutchouk, “Statistical Estimate and Correction of the LEP Optics Imperfections”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1322-1325.
[n] N. Wang and S. Wang, “Theoretical Study on the Two-stage Collimation System Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA037, pp. 157-159.
[n] T. Lensch, B. Beutner, and T. Wamsat, “A Fast Wire Scanner System for the European XFEL”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 304-307. doi:10.18429/JACoW-IBIC2019-TUPP010
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4418-4421. doi:10.18429/JACoW-IPAC2018-THPMK056
[n] S. H. Habet et al., “Concept of a Polarized Positron Source for CEBAF”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 457-460. doi:10.18429/JACoW-IPAC2022-MOPOTK012
[n] Y. C. Xu, Y. Z. Chen, K. C. Chu, L. F. Han, Y. B. Leng, and G. B. Zhao, “A New Beam Profile Diagnostic System based on the Industrial Ethernet”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE033, pp. 1044-1046.
[n] T. Watanabe et al., “Magnet Development for SPring-8 Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1093-1095. doi:10.18429/JACoW-IPAC2016-TUOCB03
[n] G. V. Trubnikov et al., “The NICA Project at JINR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2061-2065. doi:10.18429/JACoW-IPAC2016-WEZA02
[n] B. Abreu Figueiredo and S. Albright, “GPU accelerated longitudinal phase space tomography”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS041, unpublished.
[n] W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558.
[n] K. M. Nam, Y. W. Parc, and G. S. Yun, “The Simulation Study for Single and Multi Turn ERL Based EUV FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 677-679. doi:10.18429/JACoW-FEL2019-THP044
[n] L. Cao, “Exploring second harmonic generation in hard X-ray self-seeding FEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB020, unpublished.
[n] C. Goffing et al., “Turn-by-turn measurements of the energy spread at negative momentum compaction factor at KARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2677-2680. doi:10.18429/JACoW-IPAC2023-WEPA017
[n] B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Power Tests of the 325 MHz 4-ROD RFQ Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO018, pp. 3800-3802.
[n] A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Survey and Alignment of Photon Factory Storage Ring at KEK”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1777-1780.
[n] C. B. Baumier, G. Martinet, C. Z. Antoine, F. F. Fortuna, and J. C. Villegier, “Multilayers Activities at Saclay / Orsay”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOC02, pp. 789-793.
[n] A. Kachwala, C. Pierce, D. Filippetto, J. Maxson, M. Moeini Rizi, and S. Karkare, “Picometer scale emittance from plasmonic spiral photocathode for particle accelerator applications”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2046-2049. doi:10.18429/JACoW-IPAC2024-WEPC39
[n] C. Hernalsteens, G. Sterbini, O. K. Tuormaa, C. Wiesner, and D. Wollmann, “FailSim: A Numerical Toolbox for the Study of Fast Failures and Their Impact on Machine Protection at the CERN Large Hadron Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 111-114. doi:10.18429/JACoW-IPAC2021-MOPAB022
[n] B. Koubek, H. Podlech, and A. Schempp, “Design of the 325 MHz 4-Rod RFQ for the FAIR Proton Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3733-3735. doi:10.18429/JACoW-IPAC2015-THPF022
[n] B. Bartova et al., “Characterization of Nb Coating in HIE-ISOLDE QWR Superconducting Accelerating Cavities by means of SEM-FIB and TEM”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3155-3158. doi:10.18429/JACoW-IPAC2015-WEPHA022
[n] T. Snijder, T. Juerges, and J. J. D. Mol, “Tango Controls Device Attribute extension in Python3”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper MOPV046, unpublished.
[n] W. L. Rautenbach and A. H. Botha, “Proposal for a South African National Accelerator Facility for Physics and Medicine”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-02, pp. 117-122.
[n] J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “A Study of Detection Schemes in Electro-Optic Sampling Technique”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH040, pp. 101-103.
[n] S. Peggs et al., “The European Spallation Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROAN1, pp. 2549-2551.
[n] W. Gai, A. G. Ruggiero, and J. D. Simpson, “Mixing, Staging, and Phasing for a Proton-Driven Wake Field Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 118-121.
[n] Y. Yamamoto et al., “Cavity Diagnostic System for the Vertical Test of the STF Baseline 9-cell Cavity at KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP044, pp. 643-645.
[n] Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Space Charge Effect of Bunched Beam with Nonuniform Distribution in Both Longitudinal and Transverse Directions”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-58, pp. 499-501.
[n] J. H. Tan et al., “High Power Test of SINAP X-Band Deflector at KEK”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4251-4253. doi:10.18429/JACoW-IPAC2017-THPIK068
[n] T. Inagaki, “8-GeV C-Band Accelerator Construction for XFEL/SPring-8”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR101, pp. 1090-1094.
[n] H. Huang et al., “Overcoming Depolarizing Resonances in the AGS with Two Helical Partial Snakes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI05, pp. 748-750.
[n] D. S. Yurov, A. S. Alimov, B. S. Ishkanov, N. I. Pakhomov, V. P. Sakharov, and V. I. Shvedunov, “Status of 1 MeV 25 kW CW Electron Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC048, pp. 541-543.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Choi et al., “Upgrade of Corrector Power Supplies for Pohang Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA13, pp. 342-344.
- R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
- H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
- G. H. Neuschaefer, T. S. Bhatia, J. H. Billen, S. Nath, and J. M. Watson, “SSC Drift Tube Linac Physics Design”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU418, pp. 351-354.
- V. Litvinenko et al., “High Gain FEL Amplification of Charge Modulation Caused by a Hadron”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH026, pp. 51-54.
- G.-Y. Hsiung, C.-M. Cheng, and R. Valizadeh, “Measurement of the Photoelectron Yield from the Synchrotron Radiation for the NEG-coated Tubes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA145, pp. 4294-4297.
- K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
- T. Maruta, M. Ikegami, A. Miura, G. H. Wei, and H. Sako, “Longitudinal Beam Profile Measurement at J-PARC Separated Drift Tube Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC100, pp. 1245-1247.
- Y. Sun et al., “Study with One Global Crab Cavity at IR4 for LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP020, pp. 2528-2530.
- B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1941-1946.
- J. P. Blewett, “Bunchers”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
- D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2792-2795.
- C. Zhang et al., “From EUROTRANS to MAX: New Strategies and Approaches for the Injector Development”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS043, pp. 2583-2585.
- B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
- S. K. Sharma, “A Girder-Free Magnet Support System Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 236-238.
- A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
- J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM090, pp. 3785-3787.
- P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
- I. M. Kapchinskiy, “Choice of the Block-Scheme of 1-1.5 GeV 300 mA Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH466, pp. 776-777.
- A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
- T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 792-794.
- G. Iadarola et al., “Xsuite: an integrated beam physics simulation framework”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR56, pp. 2623-2626.
- C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
- J. P. Koutchouk, “Self-compensation of the LEP Distributed Skew Gradient”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 702-705.
- L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3912-3914.
- Z. Zhang, C.-X. Tang, and H. J. Qian, “A Spatially Separated Two Frequency RF Gun Design for Beam Brightness Improvement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2572-2575.
- T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1451-1454.
- M. Guthoff, “Design and Experiences with the Beam Condition Monitor as Protection System in the CMS Experiment of the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD42, pp. 398-400.
- D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
- Y. W. Parc, M. S. Chae, J. H. Hong, and I. S. Ko, “Simulation Study on Emittance Increase due to RF Asymmetry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE038, pp. 2224-2226.
- S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
- J. L. Hirshfield, T. C. Marshall, S. V. Shchelkunov, and G. V. Sotnikov, “A Fast Kicker Using a Rectangular Dielectric Wakefield Accelerator Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2RAC03, pp. 4267-4269.
- R. P. Johnson and S. A. Bogacz, “Linacs for Future Muon Facilities”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR202, pp. 1119-1123.
- A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 445-448.
- J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1905-1908.
- T. P. Wangler, T. S. Bhatia, T. E. Blue, R. A. Gahbauer, J. E. Stovall, and C. K. C. Wang, “Conceptual Design of an RFQ Accelerator-Based Neutron Source for Boron Neutron-Capture Therapy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 678-681.
- A. Mosnier, “The IFMIF 5 MW Linacs”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR201, pp. 1114-1118.
- A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 89-91.
- H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 722-724.
- H. Sakai et al., “Operational Experience of CW SRF Injector and Main Linac Cryomodules at the Compact ERL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 63-66.
- H. L. Luo, H. Hao, X. Q. Wang, and Y. C. Xu, “Beam Optics and Magnet Design of Helium Ion FFAG Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD026, pp. 4331-4333.
- D. L. Turner, “New Methods for Dispersion Measurement and Correction for 12 GeV CEBAF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4882-4884.
- A. Khan, S. K. Sharma, and V. V. Smaluk, “Review of Alignment and Stability Tolerances for Advanced Light Sources”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 588-591.
- R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
- Yu. A. Kubyshin, A. V. Poseryaev, J. P. Rigla, and V. I. Shvedunov, “Analytic Description of the Phase Slip Effect in Race-Track Microtrons”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN063, pp. 3369-3371.
- L. Sanfelici, H. O. C. Duarte, and S. R. Marques, “Design and Impedance Optimization of the LNLS-UVX Longitudinal Kicker Cavity”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC08, pp. 369-372.
- T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3421-3424.
- S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
- V. V. Khankin, N. I. Pakhomov, V. I. Shvedunov, A. I. Karev, and V. G. Raevsky, “Operational Experience with 55 MeV Pulsed RTM”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC047, pp. 538-540.
- Z. Zhang and H. Wang, “The Magnetic Measurement of Enhancer-Dipole Magnet for CEPC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2866-2868.
- M. Grieser et al., “Recent Developments at the Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 152-155.
- R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
- J. H. Ormrod, “Overview of Superconducting Cyclotron Projects”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2062-2067.
- T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
- S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
- A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
- J. C. Yoon, J. Choi, K. M. Ha, J. H. Kim, J. M. Kim, and J.-W. Lee, “EPICS Based Control System for the KOMAC RF System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT071, pp. 716-718.
- A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
- A. Narayan, Y. Kang, J. Moss, H. Ren, S.-W. Lee, and G. Toby, “RF Tuning for the SNS LINAC RFQ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA128, unpublished.
- G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
- J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
- D. S. Yurov, A. S. Alimov, B. S. Ishkanov, V. P. Sakharov, N. I. Pakhomov, and V. I. Shvedunov, “Industrial Prototype of Compact CW Linac”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB39, pp. 248-250.
- C. K. Kuan et al., “General Design of ID Front Ends in the TPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4601-4603.
- G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
- C. Benvenuti, S. Calatroni, M. Hauer, G. Orlandi, and F. Scalambrin, “Niobium Coatings for 1.5 GHz RF Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I15, pp. XX-XX.
- V. M. Borovikov et al., “System of NMR Measurement and Stabilization of Magnetic Field in Superconducting Wiggler at BESSY II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A06, pp. 2474-2476.
- A. Puntambekar et al., “Single-cell SC Cavity Development in India”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOA07, pp. 659-662.
- S. L. Bogomolov et al., “Development of Compact 2.45 GHz ECR Ion Source for Generation of Singly-Charged Ions”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 202-206.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Theoretical Formulation of Improved SASE FEL Based on Slippage Enhancement Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4398-4401.
- R. Calaga, “ERL 5-Cell Cavity Design for High Currents”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA07, pp. 188-188.
- J. M. Bogaty, “Development of Low Level Beam Diagnostics for Polarized Proton Operation in the Zero Gradient Synchrotron (ZGS)”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1762-1765.
- J. E. Stovall, “Alignment and Steering Scenarios for the APT Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP18, pp. 686-688.
- V. K. Plotnikov, “Engineering Design of ITEP Proton Linac for Nuclear Waste Transmutation”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP80, pp. 252-254.
- J. P. Koutchouk, “Statistical Estimate and Correction of the LEP Optics Imperfections”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1322-1325.
- N. Wang and S. Wang, “Theoretical Study on the Two-stage Collimation System Design”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA037, pp. 157-159.
- T. Lensch, B. Beutner, and T. Wamsat, “A Fast Wire Scanner System for the European XFEL”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 304-307.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, and M. Yoon, “Effect of Transverse Radiation Defocusing in Post-Saturation Regime of High-Gain X-Ray Free-Electron Laser”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4418-4421.
- S. H. Habet et al., “Concept of a Polarized Positron Source for CEBAF”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 457-460.
- Y. C. Xu, Y. Z. Chen, K. C. Chu, L. F. Han, Y. B. Leng, and G. B. Zhao, “A New Beam Profile Diagnostic System based on the Industrial Ethernet”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE033, pp. 1044-1046.
- T. Watanabe et al., “Magnet Development for SPring-8 Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1093-1095.
- G. V. Trubnikov et al., “The NICA Project at JINR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2061-2065.
- B. Abreu Figueiredo and S. Albright, “GPU accelerated longitudinal phase space tomography”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS041, this conference.
- W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558.
- K. M. Nam, Y. W. Parc, and G. S. Yun, “The Simulation Study for Single and Multi Turn ERL Based EUV FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 677-679.
- L. Cao, “Exploring second harmonic generation in hard X-ray self-seeding FEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB020, this conference.
- C. Goffing et al., “Turn-by-turn measurements of the energy spread at negative momentum compaction factor at KARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA017, pp. 2677-2680.
- B. Koubek, H. Podlech, A. Schempp, and J. S. Schmidt, “Power Tests of the 325 MHz 4-ROD RFQ Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO018, pp. 3800-3802.
- A. Araki, Y. Kamiya, M. Katoh, and M. Kihara, “Survey and Alignment of Photon Factory Storage Ring at KEK”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1777-1780.
- C. B. Baumier, G. Martinet, C. Z. Antoine, F. F. Fortuna, and J. C. Villegier, “Multilayers Activities at Saclay / Orsay”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOC02, pp. 789-793.
- A. Kachwala, C. Pierce, D. Filippetto, J. Maxson, M. Moeini Rizi, and S. Karkare, “Picometer scale emittance from plasmonic spiral photocathode for particle accelerator applications”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC39, pp. 2046-2049.
- C. Hernalsteens, G. Sterbini, O. K. Tuormaa, C. Wiesner, and D. Wollmann, “FailSim: A Numerical Toolbox for the Study of Fast Failures and Their Impact on Machine Protection at the CERN Large Hadron Collider”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 111-114.
- B. Koubek, H. Podlech, and A. Schempp, “Design of the 325 MHz 4-Rod RFQ for the FAIR Proton Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3733-3735.
- B. Bartova et al., “Characterization of Nb Coating in HIE-ISOLDE QWR Superconducting Accelerating Cavities by means of SEM-FIB and TEM”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3155-3158.
- T. Snijder, T. Juerges, and J. J. D. Mol, “Tango Controls Device Attribute extension in Python3”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper MOPV046, unpublished.
- W. L. Rautenbach and A. H. Botha, “Proposal for a South African National Accelerator Facility for Physics and Medicine”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-02, pp. 117-122.
- J. Y. Huang, C. Kim, I. S. Ko, and Y. W. Parc, “A Study of Detection Schemes in Electro-Optic Sampling Technique”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH040, pp. 101-103.
- S. Peggs et al., “The European Spallation Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper FROAN1, pp. 2549-2551.
- W. Gai, A. G. Ruggiero, and J. D. Simpson, “Mixing, Staging, and Phasing for a Proton-Driven Wake Field Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 118-121.
- Y. Yamamoto et al., “Cavity Diagnostic System for the Vertical Test of the STF Baseline 9-cell Cavity at KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP044, pp. 643-645.
- Y. Chen, S. Fu, Z. Huang, and Z. Zhang, “Space Charge Effect of Bunched Beam with Nonuniform Distribution in Both Longitudinal and Transverse Directions”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-58, pp. 499-501.
- J. H. Tan et al., “High Power Test of SINAP X-Band Deflector at KEK”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4251-4253.
- T. Inagaki, “8-GeV C-Band Accelerator Construction for XFEL/SPring-8”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR101, pp. 1090-1094.
- H. Huang et al., “Overcoming Depolarizing Resonances in the AGS with Two Helical Partial Snakes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI05, pp. 748-750.
- D. S. Yurov, A. S. Alimov, B. S. Ishkanov, N. I. Pakhomov, V. P. Sakharov, and V. I. Shvedunov, “Status of 1 MeV 25 kW CW Electron Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC048, pp. 541-543.
Back to search