Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 728-734.
[n] E. Bloom et al., “The PEP - II Asymmetric B Factory: Design Details and R&D Results”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 464-467.
[n] S. J. Smith, R. Apsimon, G. Burt, S. Setiniyaz, and M. J. W. Southerby, “Visualisation of Pareto Optimal Spaces and Optimisation Solution Selection Using Parallel Coordinate Plots”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2487-2490. doi:10.18429/JACoW-IPAC2022-THPOST020
[n] C. Swain, C. Welsch, J. Wolfenden, and L. Eley, “Design of a non-invasive bunch length monitor using coherent synchrotron radiation simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2222-2224. doi:10.18429/JACoW-IPAC2024-WEPG17
[n] Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
[n] D. A. Finley, “Calculation of Integrated Luminosity for Beams Stored in the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1834-1837.
[n] S. T. Melnychuk, “Commissioning of the 40 keV Injector for a Contraband Detection System Proof-of-Principle Device”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP58, pp. 479-481.
[n] M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 160-163. doi:10.18429/JACoW-IBIC2023-TU3C02
[n] C. Wang, T. C. Marshall, and J. L. Hirshfield, “Creation of Femtosecond Sheet-Like Bunches for Driving Optical-Scale Dielectric Slab Accelerator Structures”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH164, pp. 4035-4037.
[n] T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1669-1672. doi:10.18429/JACoW-IPAC2019-TUPGW110
[n] V. S. Dyubkov and S. M. Polozov, “Analytical Approach for Beam Matching”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB011, pp. 334-336.
[n] M. T. Heron, J. R. Alexander, and P. D. Quinn, “A Report on the Review and Formal Analysis of the SRS Personnel Safety System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH125, pp. 2769-2771.
[n] G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
[n] V. K. Makovev, V. F. Minashkin, A. Yu. Molodozhentsev, K. Prokesh, V. F. Shevtsov, and G. I. Sidorov, “RF System of the Prague Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02K, pp. 1814-1816.
[n] M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
[n] M. Garlasché et al., “High-Gradient Test of a 3 GHz Single-Cell Cavity”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP037, pp. 839-841.
[n] L. Teofili, M. Migliorati, D. Carbajo Perez, F. Giordano, I. Lamas Garcia, and G. Mazzacano, “A Multi-Physics Approach to Simulate the RF Heating 3D Power Map Induced by the Proton Beam in a Beam Intercepting Device”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3452-3455. doi:10.18429/JACoW-IPAC2018-THPAK093
[n] S. V. Kuzikov, J. L. Hirshfield, M. E. Plotkin, D. Yu. Shegolkov, A. A. Vikharev, and V. P. Yakovlev, “One Channel, Multi-Mode Active Pulse Compressor”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS051, pp. 2460-2462.
[n] T. Koseki, Y. Kobayashi, H. Takaki, N. Nakamura, Y. Kamiya, and K. Kuno, “The Magnets of the VSX Light Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D067, pp. 564-566.
[n] K. Saito et al., “RD of Superconducting Cavities at KEK”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G18, pp. XX-XX.
[n] S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX.
[n] Z. G. Yin et al., “A New Design of CYCIAE230 Superconducting Cyclotron RF-Driven System”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO017, pp. 237-240. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO017
[n] Y. Tang, K. C. D. Chan, C. Ekdahl, and T. P. Hughes, “BBU Calculations for Beam Stability Experiments on DARHT-2”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH069, pp. 2943-2945.
[n] A. Drozhdin et al., “Comparison of the TESLA, NLC and CLIC Beam-Collimation System Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB008, pp. 2739-2741.
[n] J. Welch, G. Codner, G. Dugan, A. Temnykh, A. Jain, and J. Muratore, “Tests and Measurements of the CESR Phase III Interaction Region Superconducting Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH101, pp. 3472-3474.
[n] T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
[n] G.-T. Park et al., “A High Power Prototype of a Harmonic Kicker Cavity”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1749-1752. doi:10.18429/JACoW-IPAC2022-WEPOST025
[n] S. E. Kopp et al., “Segmented Foil SEM Grids at Fermilab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT044, pp. 2821-2823.
[n] M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2316-2319.
[n] A. Y. Molodozhentsev et al., “PTC-Orbit Studies for the CERN LHC Injectors Upgrade Project”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1B05, pp. 399-403.
[n] W. R. Smythe, T. A. Enegren, and R. L. Poirier, “A Versatile RF Cavity Mode Damper”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 976-979.
[n] M. Kodaira, O. Asai, N. Awaji, M. Haraguchi, and T. Kishimoto, “Performance of SORTEC 1-GeV Synchrotron Radiation Source Facility and Future Plan”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 203-206.
[n] P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1070-1072. doi:10.18429/JACoW-ICALEPCS2015-WEPGF155
[n] Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 103-105. doi:10.18429/JACoW-ICAP2015-WEP20
[n] V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
[n] T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
[n] V. P. Suller, M. G. Fedurin, P. Jines, D. J. Launey, T. A. Miller, and Y. Wang, “Improvements to, and Current Status of, the CAMD Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF069, pp. 2424-2426.
[n] Y. Fukui, D. B. Cline, A. A. Garren, and H. G. Kirk, “6 Dimensional Muon Phase Space Cooling by Using Curved Lithium Lenses”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS022, pp. 3047-3049.
[n] P. Adams, N. A. Kling, C. Liu, and G. J. Marr, “Use of the Base-Band Tune Meter Kickers During the FY18 STAR Fixed Target Run at 3.85 GeV/u”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 820-822. doi:10.18429/JACoW-NAPAC2019-WEPLH08
[n] B. Nactergal et al., “Installation and Commissioning of the First Cyclone?«70p”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 173-174. doi:10.18429/JACoW-Cyclotrons2016-TUP05
[n] E. V. Ponomareva, S. V. Akulinichev, M. I. Grachev, L. V. Kravchuk, and V. N. Zapolsky, “Proton Channel that Provides Simultaneous Independent Operation of a Treatment Room of Proton Therapy and Neutron Sources of the Experimental Complex INR RAS”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC051, pp. 544-546.
For LaTeX
Use Complete Form
For BibTeX
References
- J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 728-734.
- E. Bloom et al., “The PEP - II Asymmetric B Factory: Design Details and R&D Results”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 464-467.
- S. J. Smith, R. Apsimon, G. Burt, S. Setiniyaz, and M. J. W. Southerby, “Visualisation of Pareto Optimal Spaces and Optimisation Solution Selection Using Parallel Coordinate Plots”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2487-2490.
- C. Swain, C. Welsch, J. Wolfenden, and L. Eley, “Design of a non-invasive bunch length monitor using coherent synchrotron radiation simulations”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG17, pp. 2222-2224.
- Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
- D. A. Finley, “Calculation of Integrated Luminosity for Beams Stored in the Tevatron Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1834-1837.
- S. T. Melnychuk, “Commissioning of the 40 keV Injector for a Contraband Detection System Proof-of-Principle Device”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP58, pp. 479-481.
- M. A. Ibrahim et al., “FPGA Architectures for Distributed ML Systems for Real-Time Beam Loss De-Blending”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TU3C02, pp. 160-163.
- C. Wang, T. C. Marshall, and J. L. Hirshfield, “Creation of Femtosecond Sheet-Like Bunches for Driving Optical-Scale Dielectric Slab Accelerator Structures”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH164, pp. 4035-4037.
- T. Phimsen, B. C. Jiang, N. Juntong, P. Sudmuang, and Z. T. Zhao, “Improvement of Touschek Lifetime by Higher Harmonic RF Cavity in the SPS Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1669-1672.
- V. S. Dyubkov and S. M. Polozov, “Analytical Approach for Beam Matching”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB011, pp. 334-336.
- M. T. Heron, J. R. Alexander, and P. D. Quinn, “A Report on the Review and Formal Analysis of the SRS Personnel Safety System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH125, pp. 2769-2771.
- G. Eremeev and H. Padamsee, “Change in High Field Q-slope by Baking and Anodizing”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP03, pp. 236-239.
- V. K. Makovev, V. F. Minashkin, A. Yu. Molodozhentsev, K. Prokesh, V. F. Shevtsov, and G. I. Sidorov, “RF System of the Prague Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02K, pp. 1814-1816.
- M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
- M. Garlasché et al., “High-Gradient Test of a 3 GHz Single-Cell Cavity”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP037, pp. 839-841.
- L. Teofili, M. Migliorati, D. Carbajo Perez, F. Giordano, I. Lamas Garcia, and G. Mazzacano, “A Multi-Physics Approach to Simulate the RF Heating 3D Power Map Induced by the Proton Beam in a Beam Intercepting Device”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3452-3455.
- S. V. Kuzikov, J. L. Hirshfield, M. E. Plotkin, D. Yu. Shegolkov, A. A. Vikharev, and V. P. Yakovlev, “One Channel, Multi-Mode Active Pulse Compressor”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS051, pp. 2460-2462.
- T. Koseki, Y. Kobayashi, H. Takaki, N. Nakamura, Y. Kamiya, and K. Kuno, “The Magnets of the VSX Light Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D067, pp. 564-566.
- K. Saito et al., “RD of Superconducting Cavities at KEK”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G18, pp. XX-XX.
- S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX.
- Z. G. Yin et al., “A New Design of CYCIAE230 Superconducting Cyclotron RF-Driven System”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO017, pp. 237-240.
- Y. Tang, K. C. D. Chan, C. Ekdahl, and T. P. Hughes, “BBU Calculations for Beam Stability Experiments on DARHT-2”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH069, pp. 2943-2945.
- A. Drozhdin et al., “Comparison of the TESLA, NLC and CLIC Beam-Collimation System Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB008, pp. 2739-2741.
- J. Welch, G. Codner, G. Dugan, A. Temnykh, A. Jain, and J. Muratore, “Tests and Measurements of the CESR Phase III Interaction Region Superconducting Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH101, pp. 3472-3474.
- T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
- G.-T. Park et al., “A High Power Prototype of a Harmonic Kicker Cavity”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1749-1752.
- S. E. Kopp et al., “Segmented Foil SEM Grids at Fermilab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT044, pp. 2821-2823.
- M. Stampfer and P. Elleaume, “A 4T Superconducting Wiggler for the ESRF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2316-2319.
- A. Y. Molodozhentsev et al., “PTC-Orbit Studies for the CERN LHC Injectors Upgrade Project”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO1B05, pp. 399-403.
- W. R. Smythe, T. A. Enegren, and R. L. Poirier, “A Versatile RF Cavity Mode Damper”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 976-979.
- M. Kodaira, O. Asai, N. Awaji, M. Haraguchi, and T. Kishimoto, “Performance of SORTEC 1-GeV Synchrotron Radiation Source Facility and Future Plan”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 203-206.
- P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1070-1072.
- Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 103-105.
- V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
- T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
- V. P. Suller, M. G. Fedurin, P. Jines, D. J. Launey, T. A. Miller, and Y. Wang, “Improvements to, and Current Status of, the CAMD Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF069, pp. 2424-2426.
- Y. Fukui, D. B. Cline, A. A. Garren, and H. G. Kirk, “6 Dimensional Muon Phase Space Cooling by Using Curved Lithium Lenses”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS022, pp. 3047-3049.
- P. Adams, N. A. Kling, C. Liu, and G. J. Marr, “Use of the Base-Band Tune Meter Kickers During the FY18 STAR Fixed Target Run at 3.85 GeV/u”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 820-822.
- B. Nactergal et al., “Installation and Commissioning of the First Cyclone?«70p”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 173-174.
- E. V. Ponomareva, S. V. Akulinichev, M. I. Grachev, L. V. Kravchuk, and V. N. Zapolsky, “Proton Channel that Provides Simultaneous Independent Operation of a Treatment Room of Proton Therapy and Neutron Sources of the Experimental Complex INR RAS”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC051, pp. 544-546.
Back to search