JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Hahn and A. Ratti, “The Coupling Impedance of the RHIC Injection Kicker System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V028, pp. 1706-1708. 
[n]	K. Seiya et al., “RF system upgrade for 1.3 MW operation of J-PARC main ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1017-1020. doi:10.18429/JACoW-IPAC2024-TUPC10
[n]	R. M??ller, J. Feikes, K. Holldack, and P. Kuske, “Orbit Stability at BESSY”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE035, pp. 2366-2368. 
[n]	Z. Mart?¡, G. Benedetti, M. Carl?á, U. Iriso, and L. Torino, “Full Coupling Studies at ALBA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1667-1670. doi:10.18429/JACoW-IPAC2022-WEOZSP4
[n]	B. Mukherjee, “A RADIOLOGICAL SAFETY AND HEALTH PHYSICS DATABASE FOR CYCLOTRONS ACCELERATING PROTONS AND DEUTERONS UP TO 250 MEV”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P22, pp. XX-XX. 
[n]	R. A. Rimmer et al., “The JLAB Ampere-class Cryomodule Conceptual Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH182, pp. 490-492. 
[n]	L. Calabretta et al., “Towards the Acceleration of the First Beam by the INFN Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 551-554. 
[n]	T. Birke et al., “Use Case - Configuration Management with a generic RDB Data-Model”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_079. 
[n]	T. Kosuge, “STARS .NET Interface for Windows CE”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW01, pp. 31-33. 
[n]	E. N. Zaplatin, C. H. Boulware, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Manufacturing and First Test Results of Euclid SRF Conical Half-wave Resonator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2841-2844. doi:10.18429/JACoW-IPAC2015-WEPMA037
[n]	H. Maesaka et al., “Precise RF Control System of the SCSS Test Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC143, pp. 1404-1406. 
[n]	P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947. 
[n]	P. H. Gao et al., “Redundancy Analysis of Solid-state Ampliifers for CiADS Accelerator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 169-171. doi:10.18429/JACoW-SAP2017-TUPH30
[n]	K. Hasegawa et al., “Status and Upgrade Plan of the MR Ring RF Systems in J-PARC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2031-2033. doi:10.18429/JACoW-IPAC2022-WEPOTK004
[n]	V. Pinty, N. Jaouen, F. Marteau, H. Popescu, and P. Prout, “MAGSTAT V3: An In-Vacuum Variable-Gap Quadrupole with Rotary Permanent Magnets”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 412-414. doi:10.18429/JACoW-MEDSI2018-THPH37
[n]	S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124. 
[n]	O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS141, unpublished. 
[n]	R. Wehrle, S. Kim, J. Moenich, and R. Nielsen, “Vacuum System for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1669-1672. 
[n]	W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1455-1458. 
[n]	K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Status of 9-cell Superconducting Cavity Development for ERL Project in Japan”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO055, pp. 355-358. 
[n]	A. E. Vlieks, S. G. Anderson, V. A. Dolgashev, F. V. Hartemann, R. A. Marsh, and S. G. Tantawi, “X-band RF Gun Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA063, pp. 3816-3818. 
[n]	P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278. 
[n]	S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1690-1693. 
[n]	M. E. Bevins et al., “Mechanical and Thermal Design of the CEBAF Hall A Beam Calorimeter”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT070, pp. 3819-3821. 
[n]	J. R. Delayen, G. K. Davis, M. Drury, and E. Feldl, “Development and Testing of a Prototype Tuner for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH156, pp. 1149-1151. 
[n]	A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “Automated Design for Standing Wave Electron Photoguns: TOPGUN RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3999-4001. doi:10.18429/JACoW-IPAC2016-THPOW028
[n]	K. Wu, B. Du, S. Ma, S. Zhang, J. Pang, and S. Dong, “Development of RF reference distribution system for Hefei Advanced Light Facility”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3375-3377. doi:10.18429/JACoW-IPAC2024-THPG48
[n]	P. Krejcik, M. L. Campell, J. M. D, H. Loos, and K. Luchini, “Performance of the New Fast Wire Scanner at the LCLS”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 547-549. doi:10.18429/JACoW-IBIC2015-TUPB082
[n]	W. R. Baker, W. L. Gagnon, and F. Voelker, “Flat-Topping Magnet Current for the Berkeley Electron Ring in a Static Magnetic Field”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1047-1050. 
[n]	A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602. 
[n]	J. Chen et al., “Emittance Measurement by Using Duo Image Pattern of Cherenkov Radiation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB076, pp. 2580-2582. 
[n]	D. C. Fiander, D. Grier, K-D. Metzmacher, and P. Pearce, “A Modulated Fast Bump for the CPS Continuous Transfer”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1340-1343. 
[n]	M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398. 
[n]	J. Kirchgessner et al., “Fabrication of Superconducting Niobium Radio Frequency Structures”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3351-3354. 
[n]	R. Brinkmann, Y. Derbenev, M. Gentner, D. Husmann, and C. Steier, “Electron Cooling Possibilities for HERA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP54C, pp. 344-346. 
[n]	F. Ravotti et al., “The Beam Profile Monitoring System for the CERN IRRAD Proton Facility”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 825-828. doi:10.18429/JACoW-IBIC2016-WEPG75
[n]	J. Corlett et al., “A Recirculating Linac-Based Facility for Ultrafast X-Ray Science”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC003, pp. 186-188. 
[n]	M. Heilmann et al., “High Power RF Coupler for the CW-Linac Demonstrator at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 990-992. doi:10.18429/JACoW-IPAC2017-MOPVA054
[n]	K. Furukawa, M. Satoh, I. Mejuev, and K. Nakao, “A Java-based EPICS Archive Viewer with SOAP Interface for Data Retrieval”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP707, pp. XX-XX. 
[n]	G. Benedetti, U. Iriso, Z. Mart?¡, and F. P?®rez, “First Study for an Upgrade of the ALBA Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1544-1546. doi:10.18429/JACoW-IPAC2019-TUPGW061
[n]	G. Moreno et al., “H11(0) end cells for a 750 MHz IH structure”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1699-1702. doi:10.18429/JACoW-IPAC2023-TUPA171
[n]	X. D. Yu et al., “Tuning of a Four-vane RFQ for Xi'an 200 MeV Proton Application Facility”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 838-840. doi:10.18429/JACoW-LINAC2018-THPO064
[n]	D. Ehst, N. V. Mokhov, R. J. Noble, and A. Van Ginneken, “Target Options and Yields for a Muon Collider Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W023, pp. 393-395. 
[n]	Z. Fang et al., “Present Status of RF System for Medical Proton Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT052, pp. 3185-3187. 
[n]	D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561. 
[n]	R. Müller et al., “Experimental Data Taking and Management: The Upgrade Process at BESSY II and HZB”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 84-89. doi:10.18429/JACoW-ICALEPCS2023-MO2AO04
[n]	F. Severino et al., “Embedded System Architecture and Capabilities of the RHIC LLRF Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP296, pp. 672-674. 
[n]	K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n]	D. Shuman, A. Faltens, M. Kireeff Covo, G. Ritchie, and P. A. Seidl, “A Compact High Gradient Pulsed Magnetic Quadrupole”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT068, pp. 3771-3773. 
[n]	R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Integration of Interfaces and Stabilization System in the Design of a Drift Tube Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 294-297. doi:10.18429/JACoW-LINAC2016-MOPLR070
[n]	H. Andrews et al., “A laser heated thermionic cathode”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2090-2092. doi:10.18429/JACoW-IPAC2024-WEPC55
[n]	D. Huang, H. X. Deng, C. Feng, D. Gu, Q. Gu, and Z. T. Zhao, “Applying Transverse Gradient Undulators to Suppression of Microbunching Instability”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 380-383. doi:10.18429/JACoW-LINAC2016-TUOP01
[n]	Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436. 
[n]	X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4259-4261. doi:10.18429/JACoW-IPAC2023-THPA125
[n]	M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB052, unpublished. 
[n]	P. Hamel, P. Bosland, and O. Piquet, “Reverse engineering on IPHI RFQ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1706-1708. doi:10.18429/JACoW-IPAC2023-TUPA173
[n]	F. Momal et al., “A Control Systembased on Industrial Components for Measuring and  Testing the Prototype Magnets for LHC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2322-2325. 
[n]	Z. Martí, G. Benedetti, M. Carlà, and U. Iriso, “ALBA-II first tolerance studies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3104-3107. doi:10.18429/JACoW-IPAC2023-WEPL003
[n]	W. L. Chen et al., “Beam Parameter Reconstruction at the Input of LEBT of C-ADS Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 103-105. doi:10.18429/JACoW-SAP2017-MOPH32
[n]	D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 629-631. doi:10.18429/JACoW-FEL2019-THP016
[n]	R. De Prisco, A. R. Karlsson, M. Eshraqi, Y. I. Levinsen, and R. Miyamoto, “Implication of Manufacturing Errors on the Layout of Stabilization System and on the Field Quality in a Drift Tube Linac - RF DTL Error Study”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 290-293. doi:10.18429/JACoW-LINAC2016-MOPLR069
[n]	P. Tenenbaum, R. Brinkmann, and V. Tsakanov, “Beam-based Alignment of the TESLA Main Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI054, pp. 515-517. 
[n]	S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42. 
[n]	C. E. Reece et al., “High Thermal Conductivity Cryogenic RF Feedthroughs for Higher Order Mode Couplers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT082, pp. 4108-4110. 
[n]	P. J. Bryant, “Synchrotron-Driven Spallation Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG03, pp. 322-326. 
[n]	J. Q. Li, “Production of intense carbon beams with permanent magnet ECR ion sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO24, unpublished. 
[n]	J. Feikes, K. Holldack, P. Kuske, and R. M??ller, “Beam Stabilization at BESSY: Set-up, Performance, Plans”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH112, pp. XX-XX. 
[n]	A. Stirin, P. Aleksandrov, V. Korchuganov, E. B. Aleksandrov, and V. S. Zapasskii, “Measurement of Speed of Light Emitted by Ultrarelativistic Source”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD009, pp. 584-586. 
[n]	N. Nakamura, H. Sakai, and H. Takaki, “Simulation Study of Resistive-wall Beam Breakup for ERLs”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN042, pp. 1010-1012. 
[n]	J. Guo, D. W. Martin, S. G. Tantawi, and C. Yoneda, “Cryogenic RF Material Testing at SLAC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP102, pp. 1030-1032. 
[n]	D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840. 
[n]	F. Caspers and G. Dome, “Reciprocity between Pick-up and Kicker Structures including the Far-Field Zone”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1208-1211. 
[n]	J. F. Zhang and A. Loulergue, “Dipole Fringe Field Effects in the ThomX Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA003, pp. 2504-2506. 
[n]	A. Grassellino, J. K. Keung, N. Lockyer, and F. M. Newcomer, “FPGA Based ILC Cavity Simulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS086, pp. 632-633. 
[n]	M. Sawamura, E. Cenni, T. Furuya, H. Sakai, K. Umemori, and K. Shinoe, “Cooling Properties of HOM Absorber Model for cERL in Japan”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO003, pp. 350-352. 
[n]	C. Feng, Y. He, W. S. Wang, and Z. J. Wang, “Calibration of the BPM Offsets in Cryomodule at CiADS Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 119-120. doi:10.18429/JACoW-SAP2017-MOPH37
[n]	B. Keil et al., “The European XFEL Beam Position Monitor System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE064, pp. 1125-1127. 
[n]	F. Caspers, H. Haseroth, and J. Knott, “High Gradients by Simultaneous Multifrequency Operations of RF Structures”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 112-115. 
[n]	K. Futatsukawa, Z. Fang, Y. Fukui, Y. Sato, and S. Shinozaki, “Improvement of the Chopper System for rf Deflector at the J-PARC Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2816-2818. doi:10.18429/JACoW-IPAC2018-WEPML051
[n]	J. L. Wilson, A. E. Fathy, and Y. W. Kang, “Investigation of Ferroelectrics for High-Power RF Phase Shifters in Accelerator Systems”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP030, pp. 637-639. 
[n]	J. Orpana et al., “Measurement of Microwave Frequencies Emitted by Instabilities of ECRIS Plasma with Waveguide Filters and Microwave Sensitive Diodes”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 133-136. doi:10.18429/JACoW-ECRIS2016-WEPP41
[n]	P. J. Bryant, “The Revised Skew Quadrupole System for Coupling Compensation in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3499-3502. 
[n]	R. Barday et al., “Instrumentation Needs and Solutions for the Development of an SRF Photoelectron Injector at the Energy-Recovery Linac BERLinPro”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD07, pp. 317-319. 
[n]	M. Gusarova, W. A. Barth, S. Yaramyshev, M. Miski-Oglu, M. Basten, and M. Busch, “Design of the Two-Gap Superconducting Re-Buncher”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2779-2782. doi:10.18429/JACoW-IPAC2018-WEPML039
[n]	J. C. Smith, L. Keller, S. A. Lundgren, T. W. Markiewicz, and A. Young, “BPM Design and Impedance Considerations for a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB079, pp. 1704-1706. 
[n]	V. V. Shirokov et al., “Compact Tandem Accelerator Based Neutron Source for the Medicine”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT121, pp. 1422-1424. 
[n]	G. E. Fischer et al., “Some Experiences from the Commissioning Program of the SLC Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 139-142. 
[n]	J. Cao, “The Progress Of BEPCII Storage Ring Diagnostics System”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper MOVTC03, pp. 41-45. 
[n]	N. V. Mokhov and A. Van Ginneken, “Muons versus Hadrons for Radiotherapy”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP118, pp. 2525-2527. 
[n]	Y. Fuwa, Y. Iwashita, H. Tongu, M. Ichikawa, and N. Miyawaki, “Development of Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 98-100. doi:10.18429/JACoW-ECRIS2016-WEPP08
[n]	M. C. L. Buzio et al., “Measurement and Scaling Laws of the Sextupolar Component in the LHC Dipole Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB018, pp. 316-318. 
[n]	C. G. Beetham et al., “Conversion of the SPS to a Multicycling Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1231-1234. 
[n]	K. Yonehara et al., “Traveling Wave RF Systems for Helical Cooling Channels”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP021, pp. 858-860. 
[n]	J. M. D, M. L. Campell, P. Krejcik, H. Loos, and K. Luchini, “Fast Wire Scanner Upgrade for LCLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 114-116. doi:10.18429/JACoW-ICALEPCS2015-MOPGF015
[n]	M. Sawamura et al., “Quadrupole HOM Damping with Eccentric-fluted Beam Pipes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN046, pp. 1022-1024. 
[n]	R. C. Gupta et al., “Optimization of Open Midplane Dipole Design for LHC IR Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT049, pp. 3055-3057. 
[n]	P. A. Gurd and W. H. Strong, “Stepper Motor Control, PLC vs VME”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA05, pp. 285-287. 
[n]	T. Tanabe, A. Blednykh, D. A. Harder, M. Lehecka, G. Rakowsky, and J. Skaritka, “Insertion Device Upgrade Plans at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT026, pp. 1949-1951. 
[n]	H. Hasebe et al., “History of Solid Disk Improvement for Rotating Charge Stripper”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C01, pp. 17-19. 
[n]	G. A. Krafft et al., “Coherent Synchrotron Radiation Detector for a Non-Invasive Subpicosecond Bunch Length Monitor”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC04, pp. 2601-2603. 
[n]	X. Zhao et al., “Structural Characterization of Nb Films Deposited by ECR Plasma Energetic Condensation on Crystalline Insulators”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO044, pp. 819-825. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search