Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. L. Bogomolov et al., “Investigation of 2.45 GHz ECR Ion Source for Production of Radioactive Ion Beams.”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI016, pp. 1691-1693.
[n] C. Reece, P. Kushnick, and T. Powers, “An Automated RF Control and Data Acquisition System for Testing Superconducting RF Cavities”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1508-1511.
[n] J. K. Boyd, “Computer Assisted Accelerator Tuning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 463-466.
[n] L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 84-86. doi:10.18429/JACoW-LINAC2024-MOPB023
[n] D. S. Yurov and V. I. Shvedunov, “Regulation of the Waveguide Coupling Factor of Standing Wave Linear Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 279-281. doi:10.18429/JACoW-RUPAC2016-TUPSA030
[n] M. Gerstel, A. Ashton, R. J. Gildea, K. Levik, and G. Winter, “Data Analysis Infrastructure for Diamond Light Source Macromolecular & Chemical Crystallography and Beyond”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1032. doi:10.18429/JACoW-ICALEPCS2019-WEMPR001
[n] J. K. Boyd, “Analytic Electrostatic Solution of an Axisymmetric Accelerator Gap”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC13, pp. 2339-2341.
[n] J. M. Nogiec, S. Feher, D. F. Orris, J. Sim, and M. Tartaglia, “Architecture of HTS Leads Software Protection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA150, pp. 1426-1428.
[n] J. van Zeijts and A. Marusic, “Ramp Design and Implementation for the RHIC Deuteron-Gold and Polarized Proton Runs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH113, pp. XX-XX.
[n] M. Abo-Bakr et al., “Status of the FEL Test Facility at MAX-lab”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper FRAAU02, pp. 513-516.
[n] B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
[n] V. H. Ranjbar, V. Lebedev, E. Lorman, and A. Xiao, “Commissioning of the Head-tail Monitoring Application for the Tevatron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT137, pp. 2780-2782.
[n] P. M. McIntyre, J. Gerity, A. Sattarov, S. Assadi, K. E. Badgley, and N. Pogue, “Simulation of Beam Dynamics in a Strong Focusing Cyclotron”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 251-254. doi:10.18429/JACoW-NAPAC2016-TUA1CO04
[n] S. Michizono, H. Mizuno, Y. Saito, and S. Yu. Kazakov, “High Power Tests of Pill-Box and TW-In-Ceramic Type S-Band RF Windows”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-39, pp. 457-459.
[n] M. Young, “Simulations of the LEDA LEBT with H$^+$, H$_2^+$, and $e^-$ Particles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W023, pp. 2749-2751.
[n] J-C. Tournier and E. Blanco Vinuela, “MONARC: Supervising the Archiving Infrastructure of CERN Control Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1112. doi:10.18429/JACoW-ICALEPCS2019-WEPHA019
[n] P. I. Volz, S. Grimmer, M. Huck, and A. Meseck, “Goubau-Line Set Up for Bench Testing Impedance of In-Vacuum Undulator Components”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3883-3885. doi:10.18429/JACoW-IPAC2021-THPAB057
[n] A. Peters and M. Ferianis, “Beam Synchronous Timing Systems”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper DW03, pp. XX-XX.
[n] F. Palmer, “Contribution of Oxide Layers to the Residual Resistance of Niobium”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-27, pp. XX-XX.
[n] E. Trachanas et al., “Automated Procedure for Conditioning of Normal Conducting Accelerator Cavities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 699-703. doi:10.18429/JACoW-ICALEPCS2023-TUPDP080
[n] C. N. Barbier et al., “Bubble Generation in the SNS 2 MW Mercury Target”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3567-3570. doi:10.18429/JACoW-IPAC2021-WEPAB367
[n] J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] J. Huang, D. Li, K. F. Liu, and T. Hu, “Low Level RF Control System for Cyclotron 10 MeV”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS020, pp. 199-202.
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] P. J. Countryman, C. M. Lyneis, and R. C. Wolgast, “Conceptual Design of a Gyrotron-Driven Superconducting ECR Ion Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 325-328.
For LaTeX
Use Complete Form
For BibTeX
References
- S. L. Bogomolov et al., “Investigation of 2.45 GHz ECR Ion Source for Production of Radioactive Ion Beams.”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI016, pp. 1691-1693.
- C. Reece, P. Kushnick, and T. Powers, “An Automated RF Control and Data Acquisition System for Testing Superconducting RF Cavities”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1508-1511.
- J. K. Boyd, “Computer Assisted Accelerator Tuning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 463-466.
- L. Shpani, C. Wang, H. Lew-Kiedrowska, M. Liepe, S. Sibener, and V. Do, “Advancements in Nb_3Sn growth for SRF technology”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 84-86.
- D. S. Yurov and V. I. Shvedunov, “Regulation of the Waveguide Coupling Factor of Standing Wave Linear Accelerator”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 279-281.
- M. Gerstel, A. Ashton, R. J. Gildea, K. Levik, and G. Winter, “Data Analysis Infrastructure for Diamond Light Source Macromolecular & Chemical Crystallography and Beyond”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1032.
- J. K. Boyd, “Analytic Electrostatic Solution of an Axisymmetric Accelerator Gap”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC13, pp. 2339-2341.
- J. M. Nogiec, S. Feher, D. F. Orris, J. Sim, and M. Tartaglia, “Architecture of HTS Leads Software Protection System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA150, pp. 1426-1428.
- J. van Zeijts and A. Marusic, “Ramp Design and Implementation for the RHIC Deuteron-Gold and Polarized Proton Runs”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH113, pp. XX-XX.
- M. Abo-Bakr et al., “Status of the FEL Test Facility at MAX-lab”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper FRAAU02, pp. 513-516.
- B. P. Wang et al., “Study of the Signal Processing System for a Cavity Beam Position MonitorS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR035, pp. 855-857.
- V. H. Ranjbar, V. Lebedev, E. Lorman, and A. Xiao, “Commissioning of the Head-tail Monitoring Application for the Tevatron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT137, pp. 2780-2782.
- P. M. McIntyre, J. Gerity, A. Sattarov, S. Assadi, K. E. Badgley, and N. Pogue, “Simulation of Beam Dynamics in a Strong Focusing Cyclotron”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 251-254.
- S. Michizono, H. Mizuno, Y. Saito, and S. Yu. Kazakov, “High Power Tests of Pill-Box and TW-In-Ceramic Type S-Band RF Windows”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-39, pp. 457-459.
- M. Young, “Simulations of the LEDA LEBT with H$^+$, H$_2^+$, and $e^-$ Particles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W023, pp. 2749-2751.
- J-C. Tournier and E. Blanco Vinuela, “MONARC: Supervising the Archiving Infrastructure of CERN Control Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1112.
- P. I. Volz, S. Grimmer, M. Huck, and A. Meseck, “Goubau-Line Set Up for Bench Testing Impedance of In-Vacuum Undulator Components”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3883-3885.
- A. Peters and M. Ferianis, “Beam Synchronous Timing Systems”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper DW03, pp. XX-XX.
- F. Palmer, “Contribution of Oxide Layers to the Residual Resistance of Niobium”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-27, pp. XX-XX.
- E. Trachanas et al., “Automated Procedure for Conditioning of Normal Conducting Accelerator Cavities”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP080, pp. 699-703.
- C. N. Barbier et al., “Bubble Generation in the SNS 2 MW Mercury Target”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3567-3570.
- J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- J. Huang, D. Li, K. F. Liu, and T. Hu, “Low Level RF Control System for Cyclotron 10 MeV”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS020, pp. 199-202.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- P. J. Countryman, C. M. Lyneis, and R. C. Wolgast, “Conceptual Design of a Gyrotron-Driven Superconducting ECR Ion Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 325-328.
Back to search