Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Delayen et al., “An R.F. Input Coupler System for the CEBAF Energy Upgrade Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA164, pp. 1462-1464.
[n] M. G. Giacchini and M. Montis, “A Distributed Documentation Approach Based on Next-Generation of Web Technologies Applied on EPICS Control System Installation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA054, pp. XX-XX.
[n] T. Y. Yasui, S. Igarashi, T. Koseki, K. Ohmi, Y. Sato, and K. Satou, “Tune Shifts and Optics Modulations in the High Intensity Operation at J-PARC MR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3148-3151. doi:10.18429/JACoW-IPAC2019-WEPTS024
[n] W. M. Yue et al., “DEVELOPMENT OF THE SUPERCONDUCTING HALF WAVE RESONATOR FOR INJECTOR II IN C-ADS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP016, pp. 923-925.
[n] L. Jin, D. Kaltchev, F. Schmidt, and A. Verdier, “Correction of the Systematic b3 Error with the Resonance-free Lattice in the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B09, pp. 1561-1563.
[n] W. Mexner et al., “Update on the Status of the FLUTE Control System”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 54-56. doi:10.18429/JACoW-PCaPAC2018-WEP10
[n] T. Tajima, C. Boffo, M. P. Kelly, and J. Mammosser, “Design of a New Electropolishing System for SRF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH179, pp. 484-486.
[n] D. P. Missiaen, J.-P. Quesnel, and R. J. Steinhagen, “The Alignment of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC04, pp. 1973-1975.
[n] R. Calaga, O. Capatina, and G. Vandoni, “The SPS Tests of the HL-LHC Crab Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 846-849. doi:10.18429/JACoW-IPAC2018-TUPAF057
[n] K. H. Gil, J. Y. Choi, C. W. Chung, Y.-C. Kim, and H.-S. Lee, “High Heat-Load Slits for the PLS Multipole Wiggler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE015, pp. 1449-1451.
[n] T. Uchida, S. Hanai, K. Sakaue, and M. Washio, “Development of Supercontinuum Light Production System Using Er Fiber Laser for Pulse Radiolysis”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3660-3662. doi:10.18429/JACoW-IPAC2019-THPGW036
[n] T. Abe et al., “Application of Highly-Pure Copper Lining to Normal-Conducting RF Cavities for an Electron-Positron Super B Factory”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT007, pp. 1051-1053.
[n] F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 50-52. doi:10.18429/JACoW-MEDSI2018-TUPH13
[n] H. Fukuma, K. Endo, A. Kabe, H. Koiso, and T. Kubo, “Power Supply Control Programs for the TRISTAN AR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3769-3772.
[n] M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
[n] R. A. Kadyrov, C. I. Clarke, A. S. Fisher, M. Petree, and C. Yee, “Electronics for LCLS-II Beam Containment System Loss Monitors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1648. doi:10.18429/JACoW-ICALEPCS2019-THCPR07
[n] W. Herr, D. Kaltchev, E. McIntosh, and F. Schmidt, “Large Scale Beam-beam Simulations for the CERN LHC using Distributed Computing”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS001, pp. 526-528.
[n] J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3679-3681. doi:10.18429/JACoW-IPAC2019-THPGW043
[n] T. T. Arkan et al., “LCLS-II Cryomodules Production at Fermilab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2652-2655. doi:10.18429/JACoW-IPAC2018-WEPMK010
[n] A. H. Lumpkin, M. Cestelli Guidi, E. Chiadroni, A. Cianchi, and C. Yao, “Considerations on ODR Beam-Size Monitoring for Gamma=1000 Beams”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF061, pp. 253-257.
[n] M. Basten et al., “First heavy ion beam acceleration with a superconducting multi gap CH-cavity”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 129-134. doi:10.18429/JACoW-HIAT2018-WEOYA02
[n] C. Herbeaux, N. B?®chu, and J.-M. Filhol, “Vacuum Conditioning of the SOLEIL Storage Ring with Extensive Use of NEG Coating”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP142, pp. 3696-3698.
[n] K. E. Deitrick, J. R. Delayen, G. A. Krafft, and B. Terzic, “Compact SRF Linac for High Brilliance Inverse Compton Scattering Light Source”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 19-23. doi:10.18429/JACoW-LINAC2018-MO2A04
[n] B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2925-2927. doi:10.18429/JACoW-IPAC2019-WEPRB051
[n] B. Lorbeer, N. Baboi, H. T. Duhme, F. Schmidt-Foehre, and K. Wittenburg, “Development Status and Performance Studies of the New MicroTCA Based Button and Strip-line BPM Electronics at FLASH 2”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 335-338. doi:10.18429/JACoW-IBIC2015-TUPB014
[n] Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 475-478.
[n] W. Zhang et al., “The Timing System of HIRFL-CSR”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 601-603. doi:10.18429/JACoW-ICALEPCS2017-TUPHA082
[n] R. Brinkmann, O. Napoly, J. Payet, and N. Walker, “A New Beam Delivery System BDS for the TESLA Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B14, pp. 513-515.
[n] N. Hayashizaki, R. Kuroda, E. J. Minehara, B. E. O, N. Oshima, and R. Suzuki, “Study of Positron Production System using Superconducting Electron Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA034, pp. 142-144.
[n] D. Kang, T. R. Bieler, and C. Compton, “Effects of Processing History on Damage Layer Evolution in Large Grain Nb Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP016, pp. 455-460.
[n] G. Kotzian, W. H?â, and D. Valuch, “Sensitivity of the LHC Transverse Feedback System to Intra-Bunch Motion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1916-1919. doi:10.18429/JACoW-IPAC2017-TUPIK093
[n] A. S. Aryshev et al., “A Compact Soft X-ray Source based on Thomson Scattering of Coherent Diffraction Radiation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA053, pp. 196-198.
[n] M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
[n] C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
[n] D. P. Siddons and Z. Yin, “Secure Remote Operations of NSLS Beamlines with (Free)NX”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB11, pp. 421-423.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Delayen et al., “An R.F. Input Coupler System for the CEBAF Energy Upgrade Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA164, pp. 1462-1464.
- M. G. Giacchini and M. Montis, “A Distributed Documentation Approach Based on Next-Generation of Web Technologies Applied on EPICS Control System Installation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA054, pp. XX-XX.
- T. Y. Yasui, S. Igarashi, T. Koseki, K. Ohmi, Y. Sato, and K. Satou, “Tune Shifts and Optics Modulations in the High Intensity Operation at J-PARC MR”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3148-3151.
- W. M. Yue et al., “DEVELOPMENT OF THE SUPERCONDUCTING HALF WAVE RESONATOR FOR INJECTOR II IN C-ADS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP016, pp. 923-925.
- L. Jin, D. Kaltchev, F. Schmidt, and A. Verdier, “Correction of the Systematic b3 Error with the Resonance-free Lattice in the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B09, pp. 1561-1563.
- W. Mexner et al., “Update on the Status of the FLUTE Control System”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 54-56.
- T. Tajima, C. Boffo, M. P. Kelly, and J. Mammosser, “Design of a New Electropolishing System for SRF Cavities”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH179, pp. 484-486.
- D. P. Missiaen, J.-P. Quesnel, and R. J. Steinhagen, “The Alignment of the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC04, pp. 1973-1975.
- R. Calaga, O. Capatina, and G. Vandoni, “The SPS Tests of the HL-LHC Crab Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 846-849.
- K. H. Gil, J. Y. Choi, C. W. Chung, Y.-C. Kim, and H.-S. Lee, “High Heat-Load Slits for the PLS Multipole Wiggler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE015, pp. 1449-1451.
- T. Uchida, S. Hanai, K. Sakaue, and M. Washio, “Development of Supercontinuum Light Production System Using Er Fiber Laser for Pulse Radiolysis”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3660-3662.
- T. Abe et al., “Application of Highly-Pure Copper Lining to Normal-Conducting RF Cavities for an Electron-Positron Super B Factory”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT007, pp. 1051-1053.
- F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 50-52.
- H. Fukuma, K. Endo, A. Kabe, H. Koiso, and T. Kubo, “Power Supply Control Programs for the TRISTAN AR”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3769-3772.
- M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
- R. A. Kadyrov, C. I. Clarke, A. S. Fisher, M. Petree, and C. Yee, “Electronics for LCLS-II Beam Containment System Loss Monitors”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1648.
- W. Herr, D. Kaltchev, E. McIntosh, and F. Schmidt, “Large Scale Beam-beam Simulations for the CERN LHC using Distributed Computing”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS001, pp. 526-528.
- J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3679-3681.
- T. T. Arkan et al., “LCLS-II Cryomodules Production at Fermilab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2652-2655.
- A. H. Lumpkin, M. Cestelli Guidi, E. Chiadroni, A. Cianchi, and C. Yao, “Considerations on ODR Beam-Size Monitoring for Gamma=1000 Beams”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF061, pp. 253-257.
- M. Basten et al., “First heavy ion beam acceleration with a superconducting multi gap CH-cavity”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 129-134.
- C. Herbeaux, N. B?®chu, and J.-M. Filhol, “Vacuum Conditioning of the SOLEIL Storage Ring with Extensive Use of NEG Coating”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP142, pp. 3696-3698.
- K. E. Deitrick, J. R. Delayen, G. A. Krafft, and B. Terzic, “Compact SRF Linac for High Brilliance Inverse Compton Scattering Light Source”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 19-23.
- B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2925-2927.
- B. Lorbeer, N. Baboi, H. T. Duhme, F. Schmidt-Foehre, and K. Wittenburg, “Development Status and Performance Studies of the New MicroTCA Based Button and Strip-line BPM Electronics at FLASH 2”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 335-338.
- Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 475-478.
- W. Zhang et al., “The Timing System of HIRFL-CSR”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 601-603.
- R. Brinkmann, O. Napoly, J. Payet, and N. Walker, “A New Beam Delivery System BDS for the TESLA Linear Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B14, pp. 513-515.
- N. Hayashizaki, R. Kuroda, E. J. Minehara, B. E. O, N. Oshima, and R. Suzuki, “Study of Positron Production System using Superconducting Electron Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA034, pp. 142-144.
- D. Kang, T. R. Bieler, and C. Compton, “Effects of Processing History on Damage Layer Evolution in Large Grain Nb Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP016, pp. 455-460.
- G. Kotzian, W. H?â, and D. Valuch, “Sensitivity of the LHC Transverse Feedback System to Intra-Bunch Motion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1916-1919.
- A. S. Aryshev et al., “A Compact Soft X-ray Source based on Thomson Scattering of Coherent Diffraction Radiation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA053, pp. 196-198.
- M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
- C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169.
- D. P. Siddons and Z. Yin, “Secure Remote Operations of NSLS Beamlines with (Free)NX”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB11, pp. 421-423.
Back to search