Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. J. Minehara, M. Sugimoto, M. Sawamura, R. Nagai, N. Kikuzawa, and N.nishimori, “First Lasing of the JAERI FEL Driven by the Superconducting RF Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D068, pp. 840-841.
[n] R. Hajima, E. J. Minehara, and T. Shizuma, “Study on Emittance Dilution in the JAERI-FEL Energy-Recovery Transport”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A06, pp. 1033-1035.
[n] S.-H. Han and Y.-S. Cho, “Design and Initial Tests of a Gas Scattering Energy Monitor in the PEFP RFQ and DTL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT006, pp. 997-999.
[n] F. Abusaif et al., “Investigations on NbTi superconducting racetrack coils under pulsed-current excitations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3735-3738. doi:10.18429/JACoW-IPAC2023-WEPM070
[n] D. Gancarcik et al., “Energy deposition simulations for a damage experiment with superconducting sample coils”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3696-3699. doi:10.18429/JACoW-IPAC2023-WEPM058
[n] F. Marhauser et al., “Status of the LCLS-II Accelerating Cavity Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1164-1166. doi:10.18429/JACoW-IPAC2017-MOPVA131
[n] N. Nishimori, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and M. Sawamura, “20.8MHz Electron Gun System for an Energy Recovery Linac FEL at JAERI”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16029, pp. XX-XX.
[n] I.-S. Hong, Y.-S. Cho, and S.-H. Han, “50keV, 50mA Pulsed Proton Injector for PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE005, pp. 964-966.
[n] Y.-S. Cho et al., “Status of PEFP 3MeV RFQ Development”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT089, pp. 1363-1365.
[n] Y.-S. Cho et al., “Development of PEFP 20 MeV Proton Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS051, pp. 1609-1611.
[n] E. J. Minehara, “Thermal and Non-thermal Laser Cutting Utilizing Advanced Industrial Lasers and ERL-FELs”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH073, pp. 175-178.
[n] R. Nagai et al., “Performance of a Conventional Analog Phi-A Type Low-Level RF Controller”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH006, pp. 316-318.
For LaTeX
Use Complete Form
For BibTeX
References
- E. J. Minehara, M. Sugimoto, M. Sawamura, R. Nagai, N. Kikuzawa, and N.nishimori, “First Lasing of the JAERI FEL Driven by the Superconducting RF Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D068, pp. 840-841.
- R. Hajima, E. J. Minehara, and T. Shizuma, “Study on Emittance Dilution in the JAERI-FEL Energy-Recovery Transport”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A06, pp. 1033-1035.
- S.-H. Han and Y.-S. Cho, “Design and Initial Tests of a Gas Scattering Energy Monitor in the PEFP RFQ and DTL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT006, pp. 997-999.
- F. Abusaif et al., “Investigations on NbTi superconducting racetrack coils under pulsed-current excitations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM070, pp. 3735-3738.
- D. Gancarcik et al., “Energy deposition simulations for a damage experiment with superconducting sample coils”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM058, pp. 3696-3699.
- F. Marhauser et al., “Status of the LCLS-II Accelerating Cavity Production”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1164-1166.
- N. Nishimori, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and M. Sawamura, “20.8MHz Electron Gun System for an Energy Recovery Linac FEL at JAERI”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16029, pp. XX-XX.
- I.-S. Hong, Y.-S. Cho, and S.-H. Han, “50keV, 50mA Pulsed Proton Injector for PEFP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE005, pp. 964-966.
- Y.-S. Cho et al., “Status of PEFP 3MeV RFQ Development”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT089, pp. 1363-1365.
- Y.-S. Cho et al., “Development of PEFP 20 MeV Proton Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS051, pp. 1609-1611.
- E. J. Minehara, “Thermal and Non-thermal Laser Cutting Utilizing Advanced Industrial Lasers and ERL-FELs”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH073, pp. 175-178.
- R. Nagai et al., “Performance of a Conventional Analog Phi-A Type Low-Level RF Controller”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH006, pp. 316-318.
Back to search