JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Hessami, A. Knetsch, D. Reis, J. Wang, and S. Meuren, “E-320 at SLAC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR35, unpublished. 
[n]	Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193. 
[n]	N. Gambino et al., “Status of helium ion beams commissioning at MedAustron ion therapy center”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1637-1640. doi:10.18429/JACoW-IPAC2024-TUPS06
[n]	D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526. 
[n]	R. Zhang, H. K. Kumano, N. Toyotomi, M. Yoshida, and X. Zhou, “Laser System for SuperKEKB RF Gun in Phase III Commissioning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2914-2916. doi:10.18429/JACoW-IPAC2022-THPOTK059
[n]	H. Zen et al., “Experimental Study on Effect of Energy Distribution on Transverse Phase Space Tomography”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH039, pp. 668-671. 
[n]	F. Saeidi, Z. Azami, E. Ahmadi, K. Noori, and A. Tafrihi, “Conceptual design of multipole injection kicker magnets for the ILSF storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3643-3645. doi:10.18429/JACoW-IPAC2023-WEPM039
[n]	K. Yamada et al., “Status of the Superconducting Ring Cyclotron at RIKEN RI Beam Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP069, pp. 3518-3520. 
[n]	H. Fadil et al., “Design and Commissioning of a Compact Electron Cooler for the S-LSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS064, pp. 1639-1641. 
[n]	S. Sanaye Hajari, S. Zarei, and S. F. masoudi, “Beam Dynamic study of the accelerating cavity of the dual energy NSTRI-eLinac”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS014, unpublished. 
[n]	C.-K. Ng, T. Weiland, D. Martin, S. Smith, and N. Kurita, “Simulation of PEP-II Beam Position Monitors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ15, pp. 2485-2487. 
[n]	N. Tokuda, H. Sato, K. Marutsuka, and M. J. Shirakata, “THE MAGNET ALIGNMENT OF THE KEK-PS MAIN RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP054, pp. XX-XX. 
[n]	M. Lund and J. Barnard, “Theory of Longitudinal Beam Halo in RF Linacs: II. Envelope-Particle Resonances”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V020, pp. 1932-1934. 
[n]	M. K. Fujimaki, M. Kase, A. Uchiyama, and M. Komiyama, “Status of Control System for RIKEN RI-Beam Factory”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB11, pp. 187-189. 
[n]	H. Sato, T. Kubo, K. Marutsuka, Y. Saito, M. Shirakata, and N. Tokuda, “Experience of the Erosion-Corrosion Problems in the Main Ring Cooling Water System at the KEK-PS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH093, pp. 1426-1428. 
[n]	R. Robles, C. Emma, R. M. Hessami, K. Larsen, and A. Marinelli, “Generating Sub-Femtosecond Electron Beams at Plasma Wakefield Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2217-2220. doi:10.18429/JACoW-IPAC2022-WEPOTK064
[n]	T. Shirai et al., “Lattice Design and Cooling Simulation at S-LSR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT116, pp. 2122-2124. 
[n]	Y. Sato et al., “Design of the Low Energy Beam Transport in RIKEN New Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB023, pp. 3936-3938. 
[n]	H. Imao, “Realization of New Charge-state Stripper for High-power Uranium Ion Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPPA01, pp. 3135-3138. 
[n]	I. Yamane, M. Nakamura, and H. Okuno, “Laser Recycler Using An Asymmetrical Con-focal Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA034, pp. 1402-1404. 
[n]	J. Biernat, “Modern electron beam diagnostic techniques based on LOCO and feed forward artificial neural networks.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC59, unpublished. 
[n]	T. Hotei, R. Kato, and T. Miyajima, “Evaluation of 60pC Beam Performance at cERL Injector for ERL Based EUV-FEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 699-701. doi:10.18429/JACoW-LINAC2018-THPO009
[n]	O. A. Tanaka, T. Miyajima, N. Nakamura, and T. Tanikawa, “Injector Design Towards ERL-Based EUV-FEL for Lithography”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2299-2302. doi:10.18429/JACoW-IPAC2022-WEPOMS025
[n]	D. Caiazza, A. Gubertini, D. Castronovo, and M. Modica, “Magnetic measurement systems for Elettra 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3631-3634. doi:10.18429/JACoW-IPAC2023-WEPM034
[n]	H. Sato, M. Shirakata, K. Marutsuka, N. Tokuda, and S. Yamanaka, “Floor Level Fluctuation in the KEK-PS Tunnel”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D071, pp. 263-265. 
[n]	S. Matsumoto et al., “The Status of Nextef; The X-band Test Facility in KEK”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP053, pp. 906-908. 
[n]	P. J. Niedermayer, R. N. Geißler, and R. Singh, “Software Defined Radio Based Feedback System for Transverse Beam Excitation”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 306-307. doi:10.18429/JACoW-IBIC2023-WE2C02
[n]	S. Chauhan, A. Edelen, C. Emma, and S. Gessner, “Modeling and optimization of the FACET-II injector with machine learning algorithms”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 913-916. doi:10.18429/JACoW-IPAC2024-MOPS79
[n]	B. Yu. Bogdanovich, V. V. Kapin, and A. V. Nesterovich, “CHARGING OF A SPHERICAL HIGH-VOLTAGE TERMINAL BY PARTICLE BEAM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP04, pp. XX-XX. 
[n]	D. J. Xiao, C. P. Chu, and Y. S. Qiao, “Orbit Correction With Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2608-2610. doi:10.18429/JACoW-IPAC2019-WEPGW058
[n]	M. M. El-Ashmawy, G. D'Auria, M. M. Dehler, J.-Y. Raguin, G. Riddone, and R. Zennaro, “Single Bunch Wakefields in the CERN-PSI-ELETTRA X-band Linear Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD032, pp. 1997-1999. 
[n]	O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS141, unpublished. 
[n]	S. Matsumoto et al., “Characteristics of Different Materials on High-Gradient Experiments”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP055, pp. 912-914. 
[n]	J. Barnard and M. Lund, “Theory of Longitudinal Beam Halo in RF Linacs: I. Core/Test-Particle Formulation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V018, pp. 1929-1931. 
[n]	S. Nikiforov, D. V. Efremov, A. Solnyshkov, D. Solnyshkov, and G. Voronin, “Development of an ECR Ion Source for Accelerators and Plasma Processing Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1427-1430. 
[n]	T. Dohmae et al., “Fabrication of 1.3 GHz SRF Cavities Using Medium Grain Niobium Discs Directly Sliced from Forged Ingot”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 287. doi:10.18429/JACoW-SRF2021-MOPCAV012
[n]	T. Kii, K. Masuda, H. Ohgaki, T. Shiiyama, H. Zen, and S. Sasaki, “Progress in the FEL Lasing in Kyoto University”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH025, pp. 394-397. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search