Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. J. Martens, T. Batten, D. Bertwistle, and M. J. Boland, “Operational and Beam Study Results of Measurements with the Transverse Feedback System at the Canadian Light Source”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 481-484. doi:10.18429/JACoW-IBIC2022-WEP33
[n] M. B. James et al., “Update on the High-Current Injector for the Stanford Linear Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2992-2995.
[n] Z. Sun et al., “Toward Stoichiometric and Low-Surface-Roughness Nb3Sn Thin Films via Direct Electrochemical Deposition”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 710. doi:10.18429/JACoW-SRF2021-WEOTEV03
[n] D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-4, pp. 46-47.
[n] R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
[n] S. Prawanta et al., “Design and Construction of Sextupole Magnet Prototype for Siam Photon Source II Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4295-4297. doi:10.18429/JACoW-IPAC2019-THPTS076
[n] M. Prom?® et al., “The Operation of the GANIL Control System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M03, pp. 555-558.
[n] S. H. Wang, D. M. Kong, Z. H. Luo, J. M. Qiao, and H. S. Zhang, “Improvement and Application of the Beijing Proton Linac (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-55, pp. 828-830.
[n] P. A. Bak et al., “Status of a Radio-Frequency-Based Streak Camera with Sub-PS Time Resolution”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B02, pp. 1723-1725.
[n] D. Kashinskiy, A. Kolomiets, S. Minaev, V. Pershin, B. Y. Sharkov, and T. Tretyakova, “Engineering Design of High-current 81.36 MHz RFQ with Elliptic Coupling Windows”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT123, pp. 2143-2145.
[n] M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637.
[n] C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 707-710.
[n] S. A. Glukhov, E. B. Levichev, S. A. Nikitin, P. A. Piminov, D. N. Shatilov, and S. V. Sinyatkin, “6D Tracking with Compute Unified Device Architecture (CUDA) Technology”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 115-117. doi:10.18429/JACoW-ICAP2015-WEP34
[n] M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 24-28. doi:10.18429/JACoW-IBIC2023-MO3C05
[n] G. Moritz et al., “Towards Fast-Pulsed Superconducting Synchrotron Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB010, pp. 211-213.
[n] J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2470-2473.
[n] A. Carroll et al., “Large Acceptance Magnetic Focusing Horns for Production of a High Intensity Narrow Band Neutrino Beam at the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3054-3057.
[n] Y. Baconnier, K. Geissler, J. H. B. Madsen, A. Pisent, and G. Suberlucq, “CLIC Studies - The DC Test Bench for Laser Driven Photoemissive Cathodes”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 688-691.
[n] E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
[n] R. Koontz, M. Akemoto, S. Gold, A. Krasnykh, and Z. Wilson, “NLC Klystron Pulse Modulator R&D at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P097, pp. 1319-1321.
[n] G. D'Auria et al., “The FERMI Project at Trieste: A Linac-Based Ultra Bright Photon Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH417, pp. 641-643.
[n] S. A. Gavrilov, A. Feschenko, and P. I. Reinhardt-Nickoulin, “INR RAS Instrumentation for Bunch Shape and Beam Cross-Section Monitoring”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 204-206. doi:10.18429/JACoW-RUPAC2016-THCBSH01
[n] L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
[n] G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1552-1556. doi:10.18429/JACoW-ICALEPCS2017-THPHA071
For LaTeX
Use Complete Form
For BibTeX
References
- S. J. Martens, T. Batten, D. Bertwistle, and M. J. Boland, “Operational and Beam Study Results of Measurements with the Transverse Feedback System at the Canadian Light Source”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 481-484.
- M. B. James et al., “Update on the High-Current Injector for the Stanford Linear Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2992-2995.
- Z. Sun et al., “Toward Stoichiometric and Low-Surface-Roughness Nb3Sn Thin Films via Direct Electrochemical Deposition”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 710.
- D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-4, pp. 46-47.
- R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
- S. Prawanta et al., “Design and Construction of Sextupole Magnet Prototype for Siam Photon Source II Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4295-4297.
- M. Prom?® et al., “The Operation of the GANIL Control System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper M03, pp. 555-558.
- S. H. Wang, D. M. Kong, Z. H. Luo, J. M. Qiao, and H. S. Zhang, “Improvement and Application of the Beijing Proton Linac (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-55, pp. 828-830.
- P. A. Bak et al., “Status of a Radio-Frequency-Based Streak Camera with Sub-PS Time Resolution”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B02, pp. 1723-1725.
- D. Kashinskiy, A. Kolomiets, S. Minaev, V. Pershin, B. Y. Sharkov, and T. Tretyakova, “Engineering Design of High-current 81.36 MHz RFQ with Elliptic Coupling Windows”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT123, pp. 2143-2145.
- M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 634-637.
- C. Bourat et al., “Measurements on the ELETTRA 1.5 GeV Electron Linac Injector”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 707-710.
- S. A. Glukhov, E. B. Levichev, S. A. Nikitin, P. A. Piminov, D. N. Shatilov, and S. V. Sinyatkin, “6D Tracking with Compute Unified Device Architecture (CUDA) Technology”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 115-117.
- M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C05, pp. 24-28.
- G. Moritz et al., “Towards Fast-Pulsed Superconducting Synchrotron Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB010, pp. 211-213.
- J. Miertusova, F. Daclon, and F. Giacuzzo, “Experience with the ELETTRA Vacuum System during Commissioning”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2470-2473.
- A. Carroll et al., “Large Acceptance Magnetic Focusing Horns for Production of a High Intensity Narrow Band Neutrino Beam at the AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3054-3057.
- Y. Baconnier, K. Geissler, J. H. B. Madsen, A. Pisent, and G. Suberlucq, “CLIC Studies - The DC Test Bench for Laser Driven Photoemissive Cathodes”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 688-691.
- E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
- R. Koontz, M. Akemoto, S. Gold, A. Krasnykh, and Z. Wilson, “NLC Klystron Pulse Modulator R&D at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P097, pp. 1319-1321.
- G. D'Auria et al., “The FERMI Project at Trieste: A Linac-Based Ultra Bright Photon Source”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH417, pp. 641-643.
- S. A. Gavrilov, A. Feschenko, and P. I. Reinhardt-Nickoulin, “INR RAS Instrumentation for Bunch Shape and Beam Cross-Section Monitoring”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 204-206.
- L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
- G. Daniluk and E. Gousiou, “Plans at CERN for Electronics and Communication in the Distributed I/O Tier”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1552-1556.
Back to search