Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
[n] A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n] P. Kainberger, “Replacement of Outdated VME Boards as Starting Point for Control System Modernization”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_093.
[n] D. Meissner et al., “Design of a flexible RIXS Setup”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 400-402. doi:10.18429/JACoW-MEDSI2018-THPH31
[n] A. Gomes de Oliveira-Filho, G. Ascenção, S. Luiz, and J. Vieira, “XBPM calibration and simulations at SIRIUS”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6344, unpublished.
[n] J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
[n] W. Xu, I. Ben-Zvi, R. Calaga, H. Hahn, E. C. Johnson, and J. Kewisch, “High Current SRF Cavity Design for SPL and eRHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROBS6, pp. 2589-2591.
[n] A. Angelovski, R. Jakoby, A. Penirschke, C. Gerth, U. Mavric, and C. Sydlo, “Planar Transmission Line BPM for Horizontal Aperture Chicane for XFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA47, pp. 168-170.
[n] A. Gover, J. B. Rosenzweig, and E. Hemsing, “A Description of Guided FEL Radiation Using Dielectric Waveguide Eigenmodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH022, pp. 65-68.
[n] M. Cavenaile, F. Ames, C. R. J. Charles, O. K. Kester, B. E. Schultz, and R. Kanungo, “Pulse Stretching Out of the CANREB EBIS”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH03, unpublished.
[n] M. J. Rhoades-Brown, “The Heavy Ion Injection Scheme for RHIC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 663-666.
[n] M. Furman, “ILC Damping Rings: Benefit of the Antechamber or: Antechamber vs. SEY”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper FTR00, pp. 194-201.
[n] J. Reindl et al., “MiniBEE - Minibeam Beamline for Preclinical Experiments”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 34-36. doi:10.18429/JACoW-IBIC2023-MOP002
[n] R. Dölling et al., “Status of oscillating arm wire monitor development”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 383-387. doi:10.18429/JACoW-IBIC2025-TUPCO14
[n] D. Martin et al., “A Resonant Beam Detector for Tevatron Tune Monitoring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1486-1489.
[n] H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
[n] M. Pivi, M. Furman, and T. O. Raubenheimer, “Recent Electron-Cloud Simulation Results for the Main Damping Rings of the NLC and TESLA Linear Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG023, pp. 3219-3221.
[n] K. Herlo, “Stepping Motor Control for Septum Plate Positioning”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP019, pp. 125-127.
[n] I. Carvalho de Almeida, M. Hoffmann Wallner, and A. Pontes Barbosa Lima, “Third Harmonic Superconductive Cavity for Bunch Lengthening and Beam Lifetime Increase of Sirius Synchrotron Light Source”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 37. doi:10.18429/JACoW-SRF2021-SUPCAV011
[n] H. H. Braun et al., “Emittance Growth and Energy Loss Due to Coherent Synchrotron Radiation in the Bunch Compressor of the CLIC Test Facility CTF II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B11, pp. 471-473.
[n] L. E. Moritz, “Radiation Protection Considerations in the Design of Accelerated Radioactive Beam Facilities”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-01, pp. 331-337.
[n] J. Vieira, G. Ascenção, and S. Luiz, “SIRIUS storage ring emittance measurement”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2337, unpublished.
[n] A. Angelovski et al., “Realization and Measurements of Cone-shaped Pickups for Bunch Arrival-time Monitors for FLASH and XFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA46, pp. 165-167.
[n] V. Tympel et al., “Cryogenic Current Comparators for 150 mm Beamline Diameter”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 431-434. doi:10.18429/JACoW-IBIC2017-WEPCF07
[n] F. D. Dziuba et al., “First Cold Tests of the Superconducting cw Demonstrator at GSI”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 84-86. doi:10.18429/JACoW-RUPAC2016-WECBMH01
[n] S. Kashiwagi et al., “Status of Test-Accelerator as Coherent THz Source (t-ACTS) at ELPH, Tohoku University”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1475-1477. doi:10.18429/JACoW-IPAC2019-TUPGW033
[n] M. Liu, K. C. Chu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD23, pp. 199-201.
[n] P. Bosland, F. Guemas, M. Juillard, M. Couach, and A. F. Khoder, “NbTiN Superconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E13, pp. XX-XX.
[n] V. V. Altsybeyev et al., “Modeling of Triode Source of Intense Radial Converging Electron Beam”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 336-338. doi:10.18429/JACoW-RUPAC2016-TUPSA062
[n] N. Solyak, Y. I. Eidelman, N. V. Mokhov, G. V. Romanov, and W. M. Tam, “Dark Current Model for ILC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP036, pp. 625-627.
[n] D. P. Perl, N. Frisina, D. E. Oram, and N. P. Paterson, “Ultra-High Throughput Automated Macromolecular Crystallography Data Collection Using the Bluesky Framework”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1280-1284. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO34
[n] L. Pivetta et al., “New Developments for the HDB++ TANGO Archiving System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 801-805. doi:10.18429/JACoW-ICALEPCS2017-TUPHA166
[n] T. Mori et al., “Electron Beam Injection System for SuperKEKB Main Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 122-124. doi:10.18429/JACoW-IPAC2014-MOPRO025
[n] M. Pedrozzi and G. Ingold, “Extended Parametric Evaluation for 1 Å FEL - Emittance and Current Requirements”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP45, pp. 369-371.
[n] H. H?ñhnel, C. M. Kleffner, U. Ratzinger, M. Syha, and R. Tiede, “End to End Simulations and Error Studies of the FAIR Proton Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 885-888. doi:10.18429/JACoW-IPAC2019-MOPTS019
[n] R. Amirikas and P. Ghosh, “In-Kind Contributions: A Prosperous Model of Procurement for Large-scale Science Projects”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2017-2019. doi:10.18429/JACoW-IPAC2016-TUPOY053
[n] M. H. Nasr and S. G. Tantawi, “Corrections of Klystron Output Pulse in SW Accelerator Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3772-3773. doi:10.18429/JACoW-IPAC2019-THPGW084
[n] A. Carpenter, J. F. Benesch, and C. J. Slominski, “RF Calibration of CEBAF Linac Cavities Through Phase Shifts”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 870-872. doi:10.18429/JACoW-NAPAC2016-WEB4CO03
[n] K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
[n] T. Le and A. Krasnykh, “A compact, ultrafast high-voltage pulser for tranverse electromagnetic kickers”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 772-774. doi:10.18429/JACoW-LINAC2024-THPB069
[n] A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
[n] C.-J. Liaw and P. Cameron, “Carbon Wire Heating due to Scattering in the SNS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH120, pp. 2365-2367.
[n] V. A. Polyakov and I. S. Shchedrin, “Comparison of Characteristics of the Beams, Accelerated in Electron Linacs”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3536-3540.
[n] P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP034, pp. 736-738.
[n] D. Golob, U. Platise, M. Plesko, and M. Sekoranja, “I/O Cards with Built-in Linux and TCP/IP Become Turnkey Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE615, pp. XX-XX.
[n] V. Forte, W. Bartmann, C. C. M. Borburgh, M. A. Fraser, and L. Sermeus, “Beam-Based Kicker Waveform Measurements Using Long Bunches”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 599-602. doi:10.18429/JACoW-IPAC2017-MOPIK042
[n] I. N. Meshkov, M. K. Eseev, A. D. Ovsyannikov, D. A. Ovsyannikov, and V. A. Ponomarev, “Analysis of the Particle Dynamics Stability in the Penning-Malmberg-Surko Trap”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 65-67. doi:10.18429/JACoW-RUPAC2016-WECAMH03
For LaTeX
Use Complete Form
For BibTeX
References
- B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
- A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 292-297.
- P. Kainberger, “Replacement of Outdated VME Boards as Starting Point for Control System Modernization”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_093.
- D. Meissner et al., “Design of a flexible RIXS Setup”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 400-402.
- A. Gomes de Oliveira-Filho, G. Ascenção, S. Luiz, and J. Vieira, “XBPM calibration and simulations at SIRIUS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6344, this conference.
- J. C. Hovater, “Performance of SRF Systems in Large Scale Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93C02, pp. XX-XX.
- W. Xu, I. Ben-Zvi, R. Calaga, H. Hahn, E. C. Johnson, and J. Kewisch, “High Current SRF Cavity Design for SPL and eRHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper FROBS6, pp. 2589-2591.
- A. Angelovski, R. Jakoby, A. Penirschke, C. Gerth, U. Mavric, and C. Sydlo, “Planar Transmission Line BPM for Horizontal Aperture Chicane for XFEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA47, pp. 168-170.
- A. Gover, J. B. Rosenzweig, and E. Hemsing, “A Description of Guided FEL Radiation Using Dielectric Waveguide Eigenmodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH022, pp. 65-68.
- M. Cavenaile, F. Ames, C. R. J. Charles, O. K. Kester, B. E. Schultz, and R. Kanungo, “Pulse Stretching Out of the CANREB EBIS”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH03, unpublished.
- M. J. Rhoades-Brown, “The Heavy Ion Injection Scheme for RHIC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 663-666.
- M. Furman, “ILC Damping Rings: Benefit of the Antechamber or: Antechamber vs. SEY”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper FTR00, pp. 194-201.
- J. Reindl et al., “MiniBEE - Minibeam Beamline for Preclinical Experiments”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP002, pp. 34-36.
- R. Dölling et al., “Status of oscillating arm wire monitor development”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 383-387.
- D. Martin et al., “A Resonant Beam Detector for Tevatron Tune Monitoring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1486-1489.
- H. G. Blosser, “Magnet Design for the MSU 50 MeV Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F05, pp. XX-XX.
- M. Pivi, M. Furman, and T. O. Raubenheimer, “Recent Electron-Cloud Simulation Results for the Main Damping Rings of the NLC and TESLA Linear Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG023, pp. 3219-3221.
- K. Herlo, “Stepping Motor Control for Septum Plate Positioning”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP019, pp. 125-127.
- I. Carvalho de Almeida, M. Hoffmann Wallner, and A. Pontes Barbosa Lima, “Third Harmonic Superconductive Cavity for Bunch Lengthening and Beam Lifetime Increase of Sirius Synchrotron Light Source”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 37.
- H. H. Braun et al., “Emittance Growth and Energy Loss Due to Coherent Synchrotron Radiation in the Bunch Compressor of the CLIC Test Facility CTF II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B11, pp. 471-473.
- L. E. Moritz, “Radiation Protection Considerations in the Design of Accelerated Radioactive Beam Facilities”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-01, pp. 331-337.
- J. Vieira, G. Ascenção, and S. Luiz, “SIRIUS storage ring emittance measurement”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2337, this conference.
- A. Angelovski et al., “Realization and Measurements of Cone-shaped Pickups for Bunch Arrival-time Monitors for FLASH and XFEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA46, pp. 165-167.
- V. Tympel et al., “Cryogenic Current Comparators for 150 mm Beamline Diameter”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 431-434.
- F. D. Dziuba et al., “First Cold Tests of the Superconducting cw Demonstrator at GSI”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 84-86.
- S. Kashiwagi et al., “Status of Test-Accelerator as Coherent THz Source (t-ACTS) at ELPH, Tohoku University”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1475-1477.
- M. Liu, K. C. Chu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD23, pp. 199-201.
- P. Bosland, F. Guemas, M. Juillard, M. Couach, and A. F. Khoder, “NbTiN Superconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E13, pp. XX-XX.
- V. V. Altsybeyev et al., “Modeling of Triode Source of Intense Radial Converging Electron Beam”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 336-338.
- N. Solyak, Y. I. Eidelman, N. V. Mokhov, G. V. Romanov, and W. M. Tam, “Dark Current Model for ILC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP036, pp. 625-627.
- D. P. Perl, N. Frisina, D. E. Oram, and N. P. Paterson, “Ultra-High Throughput Automated Macromolecular Crystallography Data Collection Using the Bluesky Framework”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO34, pp. 1280-1284.
- L. Pivetta et al., “New Developments for the HDB++ TANGO Archiving System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 801-805.
- T. Mori et al., “Electron Beam Injection System for SuperKEKB Main Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 122-124.
- M. Pedrozzi and G. Ingold, “Extended Parametric Evaluation for 1 Å FEL - Emittance and Current Requirements”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP45, pp. 369-371.
- H. H?ñhnel, C. M. Kleffner, U. Ratzinger, M. Syha, and R. Tiede, “End to End Simulations and Error Studies of the FAIR Proton Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 885-888.
- R. Amirikas and P. Ghosh, “In-Kind Contributions: A Prosperous Model of Procurement for Large-scale Science Projects”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2017-2019.
- M. H. Nasr and S. G. Tantawi, “Corrections of Klystron Output Pulse in SW Accelerator Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3772-3773.
- A. Carpenter, J. F. Benesch, and C. J. Slominski, “RF Calibration of CEBAF Linac Cavities Through Phase Shifts”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 870-872.
- K. Saito et al., “Behavior of Electropolished Niobium Cavities Under Different Cooldown Conditions”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F04, pp. XX-XX.
- T. Le and A. Krasnykh, “A compact, ultrafast high-voltage pulser for tranverse electromagnetic kickers”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 772-774.
- A. Burrill et al., “Challenges Encountered during the Processing of the BNL ERL 5 Cell Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS088, pp. 2541-2543.
- C.-J. Liaw and P. Cameron, “Carbon Wire Heating due to Scattering in the SNS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH120, pp. 2365-2367.
- V. A. Polyakov and I. S. Shchedrin, “Comparison of Characteristics of the Beams, Accelerated in Electron Linacs”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3536-3540.
- P. Duval, P. K. Bartkiewicz, S. W. Herb, M. Lomperski, and S. Weisse, “TINE Release 4.1: Responding to the User's Needs”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP034, pp. 736-738.
- D. Golob, U. Platise, M. Plesko, and M. Sekoranja, “I/O Cards with Built-in Linux and TCP/IP Become Turnkey Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE615, pp. XX-XX.
- V. Forte, W. Bartmann, C. C. M. Borburgh, M. A. Fraser, and L. Sermeus, “Beam-Based Kicker Waveform Measurements Using Long Bunches”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 599-602.
- I. N. Meshkov, M. K. Eseev, A. D. Ovsyannikov, D. A. Ovsyannikov, and V. A. Ponomarev, “Analysis of the Particle Dynamics Stability in the Penning-Malmberg-Surko Trap”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 65-67.
Back to search